Daily Papers

We study two-level autoresearch for cooperation: an outer-loop AI agent autonomously redesigns the inner-loop pipeline of an LLM policy-synthesis system for multi-agent Sequential Social Dilemmas (SSDs). A researcher agent R (run as a coding agent) reads the inner-loop source code, edits system prompts, feedback functions, helper libraries, and iteration logic, runs evaluations, and decides what to keep, following the autoresearch paradigm. Across two games (Cleanup and Gathering), two policy-synthesizer LLMs, and two welfare objectives (utilitarian efficiency and Rawlsian maximin), the researcher reliably exceeds hand-designed baselines, sharply tightens run-to-run variance, and outperforms prompt-only optimization. The discovered pipelines are objective-dependent: only under maximin does the researcher inject an explicit fairness mechanism into synthesizer pipelines, a class of mechanism that is absent from its own objective-agnostic system prompt and from every efficiency-optimized pipeline. This supports an information-design reading in which the researcher chooses what to reveal to the boundedly rational synthesizer as a function of the welfare objective. Code at https://github.com/vicgalle/autoresearch-social-dilemmas.

We consider whether off-policy experience from a smaller, weaker model can elicit capability in a stronger learner that on-policy RL fine-tuning (e.g., GRPO) does not reach. We find that injecting mathematically wrong drafts from a smaller but more domain-trained model -- mismatched to the current problem -- into a stronger learner's GRPO context consistently outperforms standard on-policy GRPO on held-out MATH-500 and out-of-distribution AIME 2025/2026. Concretely, we use Mathstral-7B as the learner, Qwen2.5-Math-1.5B as the draft model, 8.8K Level 3--5 MATH problems (with MATH-500 held out), and train with Dr. GRPO. Mismatch is an active ingredient: shuffling drafts to mismatched problems while holding everything else constant yields +1.62pp on MATH-500 (greedy pass@1) over the matched-wrong variant (n=10 seeds, p=0.0015, Welch's t). In fact, the mismatched-wrong variant leads all other variants we tested on MATH-500 across both greedy pass@1 and sampling pass@k. On out-of-distribution AIME 2025 and 2026, the mismatched-wrong variant uniquely lifts pass@k above both Mathstral-7B (in its native [INST] format) and the Qwen2.5-Math-1.5B draft model at every sample budget from k=1 to k=1024 across 2 seeds (+14.2pp on 2025 and +9.0pp on 2026 at pass@1024 over Mathstral-7B), and at pass@1024 also leads no-draft, matched-wrong, and mismatched-correct variants on both years. All variants use the same prompt with no draft injection at test time. The recipe -- trained on a single GPU with no SFT, no reward models, no synthesized data, and no produce-critique-revise inner loop -- reaches 71.98% MATH-500 on Mathstral-7B-v0.1, the highest published result on this model to our knowledge, surpassing the heavier WizardMath pipeline at 70.9% on full MATH (SFT + PPO with process/instruction reward models).

We reformulate the problem of supervised learning as learning to learn with two nested loops (i.e. learning problems). The inner loop learns on each individual instance with self-supervision before final prediction. The outer loop learns the self-supervised task used by the inner loop, such that its final prediction improves. Our inner loop turns out to be equivalent to linear attention when the inner-loop learner is only a linear model, and to self-attention when it is a kernel estimator. For practical comparison with linear or self-attention layers, we replace each of them in a transformer with an inner loop, so our outer loop is equivalent to training the architecture. When each inner-loop learner is a neural network, our approach vastly outperforms transformers with linear attention on ImageNet from 224 x 224 raw pixels in both accuracy and FLOPs, while (regular) transformers cannot run.

If autoresearch is itself a form of research, then autoresearch can be applied to research itself. We present Bilevel Autoresearch, a bilevel framework in which an outer autoresearch loop improves an inner autoresearch loop by reading its code and traces, identifying bottlenecks, and generating injectable Python search mechanisms at runtime. The inner loop optimizes task performance; the outer loop optimizes how the inner loop searches. Both loops use the same LLM, so improvements come from the bilevel architecture rather than a stronger meta-level model, although the outer loop consumes additional inference and wall-clock budget. On Karpathy's GPT pretraining benchmark, the meta-autoresearch outer loop achieves a 5x improvement over the standard inner loop alone (-0.045 vs. -0.009 val_bpb), while parameter-level adjustment without mechanism change yields no reliable gain. The outer loop instantiates mechanisms from adjacent search domains, including combinatorial optimization, multi-armed bandits, and design of experiments, without human specification of the final mechanism design. Trace analysis suggests that these mechanisms break deterministic search patterns and force exploration of directions the LLM's priors avoid. The experiments demonstrate, on this benchmark, a first bilevel step: an outer loop improves the search behavior of an inner loop. Code is the mechanism carrier in this implementation, but skills, prompts, workflows, evaluators, domain principles, world-model assumptions, and memory schemas can also encode mechanisms that shape future agent behavior. This suggests a path toward recursive bootstrapping, where mechanisms discovered for the inner loop can be fed back to improve the meta-level loop itself.

Deep Learning architectures, and in particular Transformers, are conventionally viewed as a composition of layers. These layers are actually often obtained as the sum of two contributions: a residual path that copies the input and the output of a Transformer block. As a consequence, the inner representations (i.e. the input of these blocks) can be interpreted as iterative refinement of a propagated latent representation. Under this lens, many works suggest that the inner space is shared across layers, meaning that tokens can be decoded at early stages. Mechanistic interpretability even goes further by conjecturing that some layers act as refinement layers. Following this path, we propose inference-time inner looping, which prolongs refinement in pretrained off-the-shelf language models by repeatedly re-applying a selected block range. Across multiple benchmarks, inner looping yields modest but consistent accuracy improvements. Analyses of the resulting latent trajectories suggest more stable state evolution and continued semantic refinement. Overall, our results suggest that additional refinement can be obtained through simple test-time looping, extending computation in frozen pretrained models.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

We introduce Loop Flow Transformers (LiFT), a family of looped generative models that scales computation by repeatedly applying a shared Diffusion Transformer (DiT) core, with only light changes to the standard architecture. Rather than asking every recurrent step for the final prediction, LiFT trains each step with a single regression target: a point on a straight path from the model's initial estimate to the flow-matching target. Because we index these targets by a continuous depth coordinate, a trained model can loop far beyond its training depth with no retraining, early exits, or other modifications. In our experiments, these longer rollouts improve generation, so inference computation can grow without adding parameters. On ImageNet at 256x256, LiFT-L/2 achieves an FID 3.34 points lower than our dense DiT-XL/2 baseline while using approximately 60% fewer parameters, 32% fewer training FLOPs, and 52% fewer inference FLOPs.

Looped Transformers provide a parameter-efficient approach to depth scaling by repeatedly applying shared Transformer blocks. Recent reasoning models have likewise highlighted the value of scaling test-time computation through longer computation trajectories. However, the principles for designing effective loop transitions remain poorly understood. We view the looped hidden state as a fast weight that is updated throughout the depth. We formulate loop transitions as local gradient-based updates, with recurrent blocks predicting implicit targets at each depth. Our framework derives loop transitions in closed form from a projection, a local objective and an optimizer update rule. Mapping representative loop transitions into this framework reveals mismatches between their transitions and projections. We first align the input maps of existing transitions. We then derive OperLoop, which combines explicit weight decay, adaptive step size and a delta objective. The aligned variants reduce training loss and improve average commonsense accuracy. OperLoop improves average generative performance over the compared looped and non-looped baselines under matched training FLOPs. These results support the framework's usefulness for loop design. We extend the analysis to additional loop models and outline a roadmap for future loop transition design.

With the increasing scale of models, the need for efficient distributed training has become increasingly urgent. Recently, many synchronous pipeline parallelism approaches have been proposed to improve training throughput. However, these approaches still suffer from two major issues, i.e., pipeline bubbles caused by periodic flushing and extra communication due to the increasing number of pipeline stages. To this end, we propose BitPipe, a bidirectional interleaved pipeline parallelism for accelerating large models training. Specifically, a hybrid scheme of fusing interleaved pipelines with bidirectional pipelines is proposed to reduce the computational time of each single micro-batch and multiply the number of devices executing simultaneously. A V-shaped schedule with eager gradient synchronization is introduced to reduce and overlap the communication between devices. Experiments conducted on up to 32 GPUs show that BitPipe improves the training throughput of GPT-style and BERT-style models by 1.05x-1.28x compared to the state-of-the-art synchronous approaches. The code of our implementation is available at https://github.com/wuhouming/BitPipe.

Coding agent infrastructure is shifting from harness engineering toward loop engineering as coding agents are deployed for sustained long-horizon software development. Existing benchmarks often center on localized tasks or end-state outcomes, offering limited insight into sustained execution. We introduce LOOPSBENCH, a long-horizon benchmark for loop engineering in coding agent evaluation. Each task is a dependency DAG over separately testable development units with source-evidenced prerequisite edges. LOOPSBENCH comprises 112 tasks from authentic sources spanning 8 programming languages and 9 domains. Its flow-aware runtime releases tests along the ready frontier and retains completed nodes as regression obligations. We evaluate frontier coding agents paired with widely used loop implementations. The strongest configuration, Opus-4.7 with Claude Code and outer continuation, resolves 25.00% of tasks. Recorded plans recover only part of the source-recovered prerequisite DAG, and regression events remain visible across the evaluated loop profiles. We open source the benchmark data and code, including all tasks, more than 5,300 development units, and executable tests, at microsoft/Loopsbench.

Fine-tuning Large Language Models (LLMs) on consumer-grade GPUs is highly cost-effective, yet constrained by limited GPU memory and slow PCIe interconnects. Pipeline parallelism combined with CPU offloading mitigates these hardware bottlenecks by reducing communication overhead. However, existing PP schedules suffer from an inherent limitation termed the weight binding issue. Binding uneven model stages (e.g., the LM head is large) to GPUs limits the pipeline's throughput to that of the GPU with the heaviest load, leading to severe pipeline bubbles. In this paper, we propose RoundPipe, a novel pipeline schedule that breaks the weight binding constraint on consumer GPU servers. RoundPipe treats GPUs as a pool of stateless execution workers and dynamically dispatches computation stages across devices in a round-robin manner, achieving a near-zero-bubble pipeline. To ensure training correctness and system efficiency, RoundPipe integrates a priority-aware transfer scheduling engine, a fine-grained distributed event-based synchronization protocol, and an automated layer partitioning algorithm. Evaluations on an 8times RTX 4090 server demonstrate that RoundPipe achieves 1.48--2.16times speedups over state-of-the-art baselines when fine-tuning 1.7B to 32B models. Remarkably, RoundPipe enables LoRA fine-tuning of the Qwen3-235B model with 31K sequence length on a single server. RoundPipe is publicly available as an open-source Python library with comprehensive documentation.

Modern large-scale LLM pretraining benefits from utilizing Pipeline Parallelism; however, synchronous implementations leave GPUs idle during pipeline bubbles, wasting computational resources. Asynchronous Pipeline Parallelism eliminates these bubbles, maximizing throughput at the cost of gradient staleness. Among asynchronous schedules, PipeDream-2BW is particularly appealing: unlike the original PipeDream schedule, it ensures a constant one-step gradient delay regardless of pipeline depth. However, its adoption remains limited due to the common belief that optimizing under staleness is fundamentally unstable. In this work, we challenge this assumption, demonstrating that degradation under one-step delay depends strongly on optimizer choice rather than being an intrinsic limitation. We provide the first comprehensive empirical analysis showing that while AdamW, the predominant optimizer at the time when PipeDream-2BW was introduced, indeed suffers from severe degradation, recent methods like Muon exhibit strong robustness under a one-step delay. We introduce an optimizer-agnostic Error Feedback-inspired correction to further mitigate delay effects. We provide supporting theoretical analysis demonstrating convergence for Muon with and without this correction. Extensive evaluation on models up to 10B parameters confirms that our strategies bridge the performance gap with synchronous training, highlighting the practical potential of asynchronous pipeline parallelism at scale.

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

Pipeline parallelism has been widely explored, but most existing schedules lack a systematic methodology. In this paper, we propose a framework to decompose pipeline schedules as repeating a building block and we show that the lifespan of the building block decides the peak activation memory of the pipeline schedule. Guided by the observations, we find that almost all existing pipeline schedules, to the best of our knowledge, are memory inefficient. To address this, we introduce a family of memory efficient building blocks with controllable activation memory, which can reduce the peak activation memory to 1/2 of 1F1B without sacrificing efficiency, and even to 1/3 with comparable throughput. We can also achieve almost zero pipeline bubbles while maintaining the same activation memory as 1F1B. Our evaluations demonstrate that in pure pipeline parallelism settings, our methods outperform 1F1B by from 7% to 55% in terms of throughput. When employing a grid search over hybrid parallelism hyperparameters in practical scenarios, our proposed methods demonstrate a 16% throughput improvement over the 1F1B baseline for large language models.

AI agents increasingly operate over extended time horizons, yet their ability to retain, organize, and recall multimodal experiences remains a critical bottleneck. Building effective lifelong memory requires navigating a vast design space spanning architecture, retrieval strategies, prompt engineering, and data pipelines; this space is too large and interconnected for manual exploration or traditional AutoML to explore effectively. We deploy an autonomous research pipeline to discover Omni-SimpleMem, a unified multimodal memory framework for lifelong AI agents. Starting from a naïve baseline (F1=0.117 on LoCoMo), the pipeline autonomously executes {sim}50 experiments across two benchmarks, diagnosing failure modes, proposing architectural modifications, and repairing data pipeline bugs, all without human intervention in the inner loop. The resulting system achieves state-of-the-art on both benchmarks, improving F1 by +411% on LoCoMo (0.117to0.598) and +214% on Mem-Gallery (0.254to0.797) relative to the initial configurations. Critically, the most impactful discoveries are not hyperparameter adjustments: bug fixes (+175%), architectural changes (+44%), and prompt engineering (+188% on specific categories) each individually exceed the cumulative contribution of all hyperparameter tuning, demonstrating capabilities fundamentally beyond the reach of traditional AutoML. We provide a taxonomy of six discovery types and identify four properties that make multimodal memory particularly suited for autoresearch, offering guidance for applying autonomous research pipelines to other AI system domains. Code is available at this https://github.com/aiming-lab/SimpleMem.

Looped Transformers have drawn growing attention because looping improves multi-step reasoning and increases the executed depth of a model without adding parameters. They achieve this by reusing a stack of L layers for N loops. However, increasing the loop count N not only destabilizes training but also shifts the best hyperparameters, so they must be searched again for every loop count. Inspired by Depth-μP (Yang et al., 2024), which multiplies each residual branch by L^{-1/2} for depth L so that a learning rate tuned on a shallow untied network transfers to a deep one, we study how the residual branches and the learning rate should scale with the loop count N. We find that loops cannot simply be treated as extra depth, because the loops share weights. At initialization, distinct layers add nearly uncorrelated increments to the residual stream, so their sum grows as L, whereas a shared layer adds positively correlated increments at every loop, so their sum grows linearly in N. For a single layer looped N times, we show in the infinite-width limit that multiplying the residual branch by 1/N and keeping the learning rate independent of N is the only parameterization with both a stable forward pass and maximal residual-stream updates. We then generalize the analysis to a stack of L distinct layers looped N times to obtain a parameterization we call Loop-μP, in which the loop factor 1/N combines with the depth factor L^{-1/2}. Empirically, we find in language modeling that the base learning rate tuned on the smallest model stays best under Loop-μP for loop counts up to 8 and executed depths up to 384 layers. These results make Loop-μP a practical recipe for scaling looped Transformers.

Augmenting Large Language Models (LLMs) with external tools enables them to execute complex, multi-step tasks. However, tool learning is hampered by the static synthetic data pipelines where data generation and model training are executed as two separate, non-interactive processes. This approach fails to adaptively focus on a model's specific weaknesses and allows noisy labels to persist, degrading training efficiency. We introduce LoopTool, a fully automated, model-aware data evolution framework that closes this loop by tightly integrating data synthesis and model training. LoopTool iteratively refines both the data and the model through three synergistic modules: (1) Greedy Capability Probing (GCP) diagnoses the model's mastered and failed capabilities; (2) Judgement-Guided Label Verification (JGLV) uses an open-source judge model to find and correct annotation errors, progressively purifying the dataset; and (3) Error-Driven Data Expansion (EDDE) generates new, challenging samples based on identified failures. This closed-loop process operates within a cost-effective, open-source ecosystem, eliminating dependence on expensive closed-source APIs. Experiments show that our 8B model trained with LoopTool significantly surpasses its 32B data generator and achieves new state-of-the-art results on the BFCL-v3 and ACEBench benchmarks for its scale. Our work demonstrates that closed-loop, self-refining data pipelines can dramatically enhance the tool-use capabilities of LLMs.

We present Loopie, the most powerful looped Transformer to date. The Loopie series consists of two Mixture-of-Experts (MoE) models: a 20B-parameter model with 2B active parameters and a 6Bparameter model with 0.6B active parameters. Looped Transformers have long faced a challenge: given an N-fold increase in pre-training compute, increasing the parameter count by a factor of N usually outperforms looping a model N times. Loopie addresses this challenge. Extensive ablation studies, including comparisons with a vanilla 30B-A3B model, show that Loopie substantially outperforms vanilla Transformer baselines trained with the same compute budget. Our novel post-training pipeline equips Loopie with strong reasoning abilities. At the 2025 IMO and IPhO, Loopie achieves gold-medal performance without tools.

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

Visual analysis and reconstruction of pipeline inner walls remain challenging in industrial inspection scenarios. This paper presents a dedicated reconstruction system for pipeline inner walls via industrial endoscopes, which is built on panoramic image stitching technology. Equipped with a custom graphical user interface (GUI), the system extracts key frames from endoscope video footage, and integrates polar coordinate transformation with image stitching techniques to unwrap annular video frames of pipeline inner walls into planar panoramic images. Experimental results demonstrate that the proposed method enables efficient processing of industrial endoscope videos, and the generated panoramic stitched images preserve all detailed features of pipeline inner walls in their entirety. This provides intuitive and accurate visual support for defect detection and condition assessment of pipeline inner walls. In comparison with the traditional frame-by-frame video review method, the proposed approach significantly elevates the efficiency of pipeline inner wall reconstruction and exhibits considerable engineering application value.

Data and pipeline parallelism are ubiquitous for training of Large Language Models (LLM) on distributed nodes. Driven by the need for cost-effective training, recent work explores efficient communication arrangement for end to end training. Motivated by LLM's resistance to layer skipping and layer reordering, in this paper, we explore stage (several consecutive layers) skipping in pipeline training, and challenge the conventional practice of sequential pipeline execution. We derive convergence and throughput constraints (guidelines) for pipelining with skipping and swapping pipeline stages. Based on these constraints, we propose SkipPipe, the first partial pipeline framework to reduce the end-to-end training time for LLMs while preserving the convergence. The core of SkipPipe is a path scheduling algorithm that optimizes the paths for individual microbatches and reduces idle time (due to microbatch collisions) on the distributed nodes, complying with the given stage skipping ratio. We extensively evaluate SkipPipe on LLaMa models from 500M to 8B parameters on up to 20 nodes. Our results show that SkipPipe reduces training iteration time by up to 55% compared to full pipeline. Our partial pipeline training also improves resistance to layer omission during inference, experiencing a drop in perplexity of only 7% when running only half the model. Our code is available at https://github.com/gensyn-ai/skippipe.

Constructing real-world data-to-insight pipelines often involves data extraction from data lakes, data integration across heterogeneous data sources, and diverse operations from data cleaning to analysis. The design and implementation of data science pipelines require domain knowledge, technical expertise, and even project-specific insights. AI systems have shown remarkable reasoning, coding, and understanding capabilities. However, it remains unclear to what extent these capabilities translate into successful design and execution of such complex pipelines. We introduce KRAMABENCH: a benchmark composed of 104 manually-curated real-world data science pipelines spanning 1700 data files from 24 data sources in 6 different domains. We show that these pipelines test the end-to-end capabilities of AI systems on data processing, requiring data discovery, wrangling and cleaning, efficient processing, statistical reasoning, and orchestrating data processing steps given a high-level task. Our evaluation tests 5 general models and 3 code generation models using our reference framework, DS-GURU, which instructs the AI model to decompose a question into a sequence of subtasks, reason through each step, and synthesize Python code that implements the proposed design. Our results on KRAMABENCH show that, although the models are sufficiently capable of solving well-specified data science code generation tasks, when extensive data processing and domain knowledge are required to construct real-world data science pipelines, existing out-of-box models fall short. Progress on KramaBench represents crucial steps towards developing autonomous data science agents for real-world applications. Our code, reference framework, and data are available at https://github.com/mitdbg/KramaBench.

Scaling Transformer-based click-through rate (CTR) models by stacking more parameters brings growing computational and storage overhead, creating a widening gap between scaling ambitions and the stringent industrial deployment constraints. We propose LoopCTR, which introduces a loop scaling paradigm that increases training-time computation through recursive reuse of shared model layers, decoupling computation from parameter growth. LoopCTR adopts a sandwich architecture enhanced with Hyper-Connected Residuals and Mixture-of-Experts, and employs process supervision at every loop depth to encode multi-loop benefits into the shared parameters. This enables a train-multi-loop, infer-zero-loop strategy where a single forward pass without any loop already outperforms all baselines. Experiments on three public benchmarks and one industrial dataset demonstrate state-of-the-art performance. Oracle analysis further reveals 0.02--0.04 AUC of untapped headroom, with models trained with fewer loops exhibiting higher oracle ceilings, pointing to a promising frontier for adaptive inference.

Looped Transformers increase effective depth by iterating a shared block of layers, but most evaluations compare at fixed model size, conflating architectural advantage with extra FLOPs. We study looping on Mixture-of-Experts Transformers while closely matching per-token FLOPs, total non-embedding parameters, and KV cache. Through a series of ablations, we arrive at a recipe we call SMELT (Sparse MoE Transformer, middle layers Loop Twice), which loops the middle half of layers twice while matching the unlooped Baseline on all three budgets. We scale SMELT across four sizes up to 54B non-embedding parameters and fit a separate Chinchilla-style scaling law for each architecture. SMELT's loss drops faster with compute, saving 6.8--18.0\% of training FLOPs on the compute-optimal frontier. The advantage transfers to downstream benchmarks beyond what validation loss predicts, is largest on Code, and grows with sample length and the number of in-context examples. Mechanistic analysis shows that the second visit reduces the attention sink and redirects mass toward content-relevant tokens, an inductive bias that may underlie the observed performance gains. These results show that looping can improve Transformers even under budget matching, offering a practical recipe that turns depth reuse into measurable gains.

In mid-2026 a slogan reorganized how practitioners talk about coding agents: stop prompting your agent, start designing the loop that prompts it. We take this claim seriously and give it a careful treatment. We call the object of the new practice the loop specification: a bounded, reusable artifact, made of a trigger, a goal, a verification step, a stopping rule and a memory, that a human hands to an agent harness (such as Claude Code or Codex) so the agent pursues a goal on its own, in place of step-by-step prompting. We distinguish this external loop specification from two things it is often confused with: an ordinary programming loop, and the internal perceive-act-observe cycle that the harness already provides as plumbing. We position loop engineering as a new layer in the progression from prompt to context to harness to loop, and we argue, against the stronger headlines, that it does not retire prompt engineering; loop and prompt are distinct tools with distinct uses. We offer four contributions: a definition and scope for the discipline; an anatomy and taxonomy of loop specifications organized around trigger, goal type, a five-level verification ladder, architecture, and named terminal states; a descriptive analysis of the Loop Library, a public corpus of fifty real loops that we code by hand; and a set of design principles and anti-patterns grounded in the scientific literature on self-correction, reward hacking and model-as-judge fragility. The corpus shows that practice has matured most where the discipline says it matters: seventy percent of loops verify in the autonomous zone of the ladder and seventy-four percent name their terminal states, while automated triggering and durable memory remain comparatively underdeveloped. We close with the limits the practice must respect, including the verification burden, comprehension debt and the risk of cognitive surrender.

Large language models can generate fluent answers that are unfaithful to the provided context, while many safeguards rely on external verification or a separate judge after generation. We introduce internal flow signatures that audit decision formation from depthwise dynamics at a fixed inter-block monitoring boundary. The method stabilizes token-wise motion via bias-centered monitoring, then summarizes trajectories in compact moving readout-aligned subspaces constructed from the top token and its close competitors within each depth window. Neighboring window frames are aligned by an orthogonal transport, yielding depth-comparable transported step lengths, turning angles, and subspace drift summaries that are invariant to within-window basis choices. A lightweight GRU validator trained on these signatures performs self-checking without modifying the base model. Beyond detection, the validator localizes a culprit depth event and enables a targeted refinement: the model rolls back to the culprit token and clamps an abnormal transported step at the identified block while preserving the orthogonal residual. The resulting pipeline provides actionable localization and low-overhead self-checking from internal decision dynamics. Code is available at github.com/EavnJeong/Internal-Flow-Signatures-for-Self-Checking-and-Refinement-in-LLMs.

Model parallelism has become a necessity for training modern large-scale deep language models. In this work, we identify a new and orthogonal dimension from existing model parallel approaches: it is possible to perform pipeline parallelism within a single training sequence for Transformer-based language models thanks to its autoregressive property. This enables a more fine-grained pipeline compared with previous work. With this key idea, we design TeraPipe, a high-performance token-level pipeline parallel algorithm for synchronous model-parallel training of Transformer-based language models. We develop a novel dynamic programming-based algorithm to calculate the optimal pipelining execution scheme given a specific model and cluster configuration. We show that TeraPipe can speed up the training by 5.0x for the largest GPT-3 model with 175 billion parameters on an AWS cluster with 48 p3.16xlarge instances compared with state-of-the-art model-parallel methods. The code for reproduction can be found at https://github.com/zhuohan123/terapipe

Large language models have led to state-of-the-art accuracies across a range of tasks. However, training these models efficiently is challenging for two reasons: a) GPU memory capacity is limited, making it impossible to fit large models on even a multi-GPU server, and b) the number of compute operations required to train these models can result in unrealistically long training times. Consequently, new methods of model parallelism such as tensor and pipeline parallelism have been proposed. Unfortunately, naive usage of these methods leads to fundamental scaling issues at thousands of GPUs, e.g., due to expensive cross-node communication or devices spending significant time waiting on other devices to make progress. In this paper, we show how different types of parallelism methods (tensor, pipeline, and data parallelism) can be composed to scale to thousands of GPUs and models with trillions of parameters. We survey techniques for pipeline parallelism and propose a novel interleaved pipeline parallelism schedule that can improve throughput by 10+% with memory footprint comparable to existing approaches. We quantitatively study the trade-offs between tensor, pipeline, and data parallelism, and provide intuition as to how to configure distributed training of a large model. Our approach allows us to perform training iterations on a model with 1 trillion parameters at 502 petaFLOP/s on 3072 GPUs with achieved per-GPU throughput of 52% of theoretical peak. Our code is open sourced at https://github.com/nvidia/megatron-lm.

Industrial recommender systems commonly use cascaded retrieval, ranking, and re-ranking pipelines. Although efficient, these pipelines fragment information and objectives across modules, rely on rigid rules, and have limited awareness of real-time intent, leaving session-level shifts among browsing, comparison, and purchase insufficiently addressed. We present DREAM (Developing Recommender Engine with Agentic Methods), an autonomous optimization control architecture that adds a perception-aware, orchestrable, and auditable policy layer atop existing pipelines without replacing them. DREAM has two core components. First, a three-tier Intent Engine fuses on-device signals into structured L0/L1/L2 intent representations; its edge-cloud trigger chain reduces reporting volume to approximately 8.7%. Second, a Meta Engine uses a MetaModel for layered M1-to-M2-to-M3 reasoning: intent summarization, strategy planning informed by Strategy Memory, and parameter translation. It dispatches the resulting parameters through a unified outlet with safety guardrails. A Reward Dual Loop continuously optimizes both components by combining offline simulation for strategy-space exploration with online feedback for outcome calibration, forming a cycle of generation, execution, evaluation, and experience accumulation. Large-scale A/B tests on Taobao's homepage feed show that re-ranking control alone improves IPV by 2.06%, Core IPV by 2.39%, and GMV by 0.88%. Extending control to fine ranking raises these gains to 2.71%, 3.06%, and 1.31%, respectively, while consistently improving PV by more than 1%. These gains require neither replacement of pipeline models nor compromise of serving stability, supporting agentic meta-control as a viable paradigm for industrial recommendation.

Pipeline parallelism is one of the key components for large-scale distributed training, yet its efficiency suffers from pipeline bubbles which were deemed inevitable. In this work, we introduce a scheduling strategy that, to our knowledge, is the first to successfully achieve zero pipeline bubbles under synchronous training semantics. The key idea behind this improvement is to split the backward computation into two parts, one that computes gradient for the input and another that computes for the parameters. Based on this idea, we handcraft novel pipeline schedules that significantly outperform the baseline methods. We further develop an algorithm that automatically finds an optimal schedule based on specific model configuration and memory limit. Additionally, to truly achieve zero bubble, we introduce a novel technique to bypass synchronizations during the optimizer step. Experimental evaluations show that our method outperforms the 1F1B schedule up to 23% in throughput under a similar memory limit. This number can be further pushed to 31% when the memory constraint is relaxed. We believe our results mark a major step forward in harnessing the true potential of pipeline parallelism. We open sourced our implementation based on the popular Megatron-LM repository on https://github.com/sail-sg/zero-bubble-pipeline-parallelism.

Language-model agents that run long tasks often redo work they have already done: they re-issue a tool call they made earlier and get back exactly the same observation, a step that adds no new information. We identify this failure as a loop. Loops appear natively in Qwen, Llama, and Gemini agents and become far more common once the agent's history is compressed to fit its context window. To reduce these loops, we propose DeLoop, a self-supervised training method. DeLoop builds on a simple observation: the agent's own rollout can provide the supervision needed to learn from its loops. We use a looping action as a negative example and the first later non-looping action in the same rollout as a positive example. DeLoop learns from these pairs through direct preference optimization and does not require task rewards, gold answers, or LLM judges. On CodeGym under compression, DeLoop reduces the share of Qwen3-8B tasks containing loops from 57.3% to 6.1%. It also uses about one third as many steps per task, with similar task success. On Qwen3-32B, DeLoop reduces loops and steps while raising task success from 37.7% to 44.8%.

Post-training agents for automated AI research requires optimizing not only model parameters, but also the runtime harness that shapes how research trajectories are generated, evaluated, and learned from. Existing pipelines typically train models under a fixed harness, including prompts, tools, skills, middleware, and memory, while leaving the data-generating process outside the optimization objective. This creates a mismatch between model updates and the static scaffolding that determines trajectory quality. We introduce Co-Harness, a framework that jointly optimizes the agent harness and model parameters during post-training. Co-Harness alternates between harness optimization and model optimization. An LLM-based HarnessCritic analyzes failed trajectories, identifies harness-level failure modes, and proposes validated local updates. The model is then fine-tuned on high-quality trajectories generated by the improved harness, distilling effective scaffolding into model parameters. A 200+ hour autonomous case study further shows that Co-Harness can recover from system crashes, improve inference efficiency, and discover ensemble strategies without human intervention. These results suggest that joint harness and model optimization is an effective way to improve agents beyond fixed-harness post-training.

Serving Large Language Models (LLMs) in production faces significant challenges from highly variable request patterns and severe resource fragmentation in serverless clusters. Current systems rely on static pipeline configurations that struggle to adapt to dynamic workload conditions, leading to substantial inefficiencies. We present FlexPipe, a novel system that dynamically reconfigures pipeline architectures during runtime to address these fundamental limitations. FlexPipe decomposes models into fine-grained stages and intelligently adjusts pipeline granularity based on real-time request pattern analysis, implementing three key innovations: fine-grained model partitioning with preserved computational graph constraints, inflight pipeline refactoring with consistent cache transitions, and topology-aware resource allocation that navigates GPU fragmentation. Comprehensive evaluation on an 82-GPU cluster demonstrates that FlexPipe achieves up to 8.5x better resource efficiency while maintaining 38.3% lower latency compared to state-of-the-art systems, reducing GPU reservation requirements from 75% to 30% of peak capacity.

Looped architectures provide an inductive bias toward learning step-by-step procedures for tasks that require compositional reasoning. The number of effective layers reached by looping determines the quality of the solution these models find. Like deep architectures, looped architectures are prone to a signal propagation problem induced by depth as the halting decision is postponed. In this paper, we address this signal propagation issue using pre-norm layers and residual scaling. Building on these architectural modifications, we propose FPRM, a Transformer-based Fixed-Point Reasoning Model that uses fixed-point convergence as an end-to-end halting mechanism in a looped architecture. We show that fixed-point halting allows FPRM to adapt its compute to task difficulty. FPRM is effective on common reasoning benchmarks, namely Sudoku, Maze, state-tracking, and ARC-AGI.

Chain-of-thought (CoT) prompting enables reasoning in language models but requires explicit verbalization of intermediate steps. Looped transformers offer an alternative by iteratively refining representations within hidden states. This parameter efficiency comes at a cost, as looped models lack the storage capacity of deeper models which use unique weights per layer. In this work, we investigate transformer models that feature both adaptive per-layer looping, where each transformer block learns to iterate its hidden state via a learned halting mechanism, and gated memory banks, that provide additional learned storage. We find that looping primarily benefits mathematical reasoning, while memory banks help recover performance on commonsense tasks compared to parameter and FLOP matched models. Combining both mechanisms yields a model that outperforms an iso-FLOP baseline, with three times the number of layers, across math benchmarks. Analysis of model internals reveals layer specialization: early layers learn to loop minimally and access memory sparingly, while later layers do both more heavily.

Data cleaning is a time-consuming and error-prone manual process, even with modern workflow tools such as OpenRefine. We present AutoDCWorkflow, an LLM-based pipeline for automatically generating data-cleaning workflows. The pipeline takes a raw table and a data analysis purpose, and generates a sequence of OpenRefine operations designed to produce a minimal, clean table sufficient to address the purpose. Six operations correspond to common data quality issues, including format inconsistencies, type errors, and duplicates. To evaluate AutoDCWorkflow, we create a benchmark with metrics assessing answers, data, and workflow quality for 142 purposes using 96 tables across six topics. The evaluation covers three key dimensions: (1) Purpose Answer: can the cleaned table produce a correct answer? (2) Column (Value): how closely does it match the ground truth table? (3) Workflow (Operations): to what extent does the generated workflow resemble the human-curated ground truth? Experiments show that Llama 3.1, Mistral, and Gemma 2 significantly enhance data quality, outperforming the baseline across all metrics. Gemma 2-27B consistently generates high-quality tables and answers, while Gemma 2-9B excels in producing workflows that closely resemble human-annotated versions.

Large Language Models (LLMs) often exhibit a gap between their internal knowledge and their explicit linguistic outputs. In this report, we empirically investigate whether Looped Transformers (LTs)--architectures that increase computational depth by iterating shared layers--can bridge this gap by utilizing their iterative nature as a form of introspection. Our experiments reveal that while increasing loop iterations narrows the gap, it is partly driven by a degradation of their internal knowledge carried by representations. Moreover, another empirical analysis suggests that current LTs' ability to perceive representations does not improve across loops; it is only present in the final loop. These results suggest that while LTs offer a promising direction for scaling computational depth, they have yet to achieve the introspection required to truly link representation space and natural language.

PipeDream is a Deep Neural Network(DNN) training system for GPUs that parallelizes computation by pipelining execution across multiple machines. Its pipeline parallel computing model avoids the slowdowns faced by data-parallel training when large models and/or limited network bandwidth induce high communication-to-computation ratios. PipeDream reduces communication by up to 95% for large DNNs relative to data-parallel training, and allows perfect overlap of communication and computation. PipeDream keeps all available GPUs productive by systematically partitioning DNN layers among them to balance work and minimize communication, versions model parameters for backward pass correctness, and schedules the forward and backward passes of different inputs in round-robin fashion to optimize "time to target accuracy". Experiments with five different DNNs on two different clusters show that PipeDream is up to 5x faster in time-to-accuracy compared to data-parallel training.

An increasing number of researchers are finding use for nth-order gradient computations for a wide variety of applications, including graphics, meta-learning (MAML), scientific computing, and most recently, implicit neural representations (INRs). Recent work shows that the gradient of an INR can be used to edit the data it represents directly without needing to convert it back to a discrete representation. However, given a function represented as a computation graph, traditional architectures face challenges in efficiently computing its nth-order gradient due to the higher demand for computing power and higher complexity in data movement. This makes it a promising target for FPGA acceleration. In this work, we introduce INR-Arch, a framework that transforms the computation graph of an nth-order gradient into a hardware-optimized dataflow architecture. We address this problem in two phases. First, we design a dataflow architecture that uses FIFO streams and an optimized computation kernel library, ensuring high memory efficiency and parallel computation. Second, we propose a compiler that extracts and optimizes computation graphs, automatically configures hardware parameters such as latency and stream depths to optimize throughput, while ensuring deadlock-free operation, and outputs High-Level Synthesis (HLS) code for FPGA implementation. We utilize INR editing as our benchmark, presenting results that demonstrate 1.8-4.8x and 1.5-3.6x speedup compared to CPU and GPU baselines respectively. Furthermore, we obtain 3.1-8.9x and 1.7-4.3x lower memory usage, and 1.7-11.3x and 5.5-32.8x lower energy-delay product. Our framework will be made open-source and available on GitHub.

We present Jet-Nemotron, a new family of hybrid-architecture language models, which matches or exceeds the accuracy of leading full-attention models while significantly improving generation throughput. Jet-Nemotron is developed using Post Neural Architecture Search (PostNAS), a novel neural architecture exploration pipeline that enables efficient model design. Unlike prior approaches, PostNAS begins with a pre-trained full-attention model and freezes its MLP weights, allowing efficient exploration of attention block designs. The pipeline includes four key components: (1) learning optimal full-attention layer placement and elimination, (2) linear attention block selection, (3) designing new attention blocks, and (4) performing hardware-aware hyperparameter search. Our Jet-Nemotron-2B model achieves comparable or superior accuracy to Qwen3, Qwen2.5, Gemma3, and Llama3.2 across a comprehensive suite of benchmarks while delivering up to 53.6x generation throughput speedup and 6.1x prefilling speedup. It also achieves higher accuracy on MMLU and MMLU-Pro than recent advanced MoE full-attention models, such as DeepSeek-V3-Small and Moonlight, despite their larger scale with 15B total and 2.2B activated parameters.

Traditional data processing pipelines are typically static and handcrafted for specific tasks, limiting their adaptability to evolving requirements. While general-purpose agents and coding assistants can generate code for well-understood data pipelines, they lack the ability to autonomously monitor, manage, and optimize an end-to-end pipeline once deployed. We present Autonomous Data Processing using Meta-agents (ADP-MA), a framework that dynamically constructs, executes, and iteratively refines data processing pipelines through hierarchical agent orchestration. At its core, meta-agents analyze input data and task specifications to design a multi-phase plan, instantiate specialized ground-level agents, and continuously evaluate pipeline performance. The architecture comprises three key components: a planning module for strategy generation, an orchestration layer for agent coordination and tool integration, and a monitoring loop for iterative evaluation and backtracking. Unlike conventional approaches, ADP-MA emphasizes context-aware optimization, adaptive workload partitioning, and progressive sampling for scalability. Additionally, the framework leverages a diverse set of external tools and can reuse previously designed agents, reducing redundancy and accelerating pipeline construction. We demonstrate ADP-MA through an interactive demo that showcases pipeline construction, execution monitoring, and adaptive refinement across representative data processing tasks.

The rapid growth in machine learning models, especially in natural language processing and computer vision, has led to challenges when running these models on hardware with limited resources. This paper introduces Superpipeline, a new framework designed to optimize the execution of large AI models on constrained hardware during both training and inference. Our approach involves dynamically managing model execution by dividing models into individual layers and efficiently transferring these layers between GPU and CPU memory. Superpipeline reduces GPU memory usage by up to 60% in our experiments while maintaining model accuracy and acceptable processing speeds. This allows models that would otherwise exceed available GPU memory to run effectively. Unlike existing solutions that focus mainly on inference or specific model types, Superpipeline can be applied to large language models (LLMs), vision-language models (VLMs), and vision-based models. We tested Superpipeline's performance across various models and hardware setups. The method includes two key parameters that allow fine-tuning the balance between GPU memory use and processing speed. Importantly, Superpipeline does not require retraining or changing model parameters, ensuring that the original model's output remains unchanged. Superpipeline's simplicity and flexibility make it useful for researchers and professionals working with advanced AI models on limited hardware. It enables the use of larger models or bigger batch sizes on existing hardware, potentially speeding up innovation across many machine learning applications. This work marks an important step toward making advanced AI models more accessible and optimizing their deployment in resource-limited environments. The code for Superpipeline is available at https://github.com/abbasiReza/super-pipeline.

Data preprocessing pipelines, which includes data decoding, cleaning, and transforming, are a crucial component of Machine Learning (ML) training. Thy are computationally intensive and often become a major bottleneck, due to the increasing performance gap between the CPUs used for preprocessing and the GPUs used for model training. Recent studies show that a significant number of CPUs across several machines are required to achieve sufficient throughput to saturate the GPUs, leading to increased resource and energy consumption. When the pipeline involves vocabulary generation, the preprocessing performance scales poorly due to significant row-wise synchronization overhead between different CPU cores and servers. To address this limitation, in this paper we present the design of Piper, a hardware accelerator for tabular data preprocessing, prototype it on FPGAs, and demonstrate its potential for training pipelines of commercial recommender systems. Piper achieves 4.7 sim 71.3times speedup in latency over a 128-core CPU server and outperforms a data-center GPU by 4.8sim 20.3times when using binary input. The impressive performance showcases Piper's potential to increase the efficiency of data preprocessing pipelines and significantly reduce their resource consumption.

Environments are the bottleneck for self-improving agents. Current terminal benchmarks were built for evaluation, not training; reinforcement learning requires a scalable pipeline, not just a dataset. We introduce Endless Terminals, a fully autonomous pipeline that procedurally generates terminal-use tasks without human annotation. The pipeline has four stages: generating diverse task descriptions, building and validating containerized environments, producing completion tests, and filtering for solvability. From this pipeline we obtain 3255 tasks spanning file operations, log management, data processing, scripting, and database operations. We train agents using vanilla PPO with binary episode level rewards and a minimal interaction loop: no retrieval, multi-agent coordination, or specialized tools. Despite this simplicity, models trained on Endless Terminals show substantial gains: on our held-out dev set, Llama-3.2-3B improves from 4.0% to 18.2%, Qwen2.5-7B from 10.7% to 53.3%, and Qwen3-8B-openthinker-sft from 42.6% to 59.0%. These improvements transfer to human-curated benchmarks: models trained on Endless Terminals show substantial gains on held out human curated benchmarks: on TerminalBench 2.0, Llama-3.2-3B improves from 0.0% to 2.2%, Qwen2.5-7B from 2.2% to 3.4%, and Qwen3-8B-openthinker-sft from 1.1% to 6.7%, in each case outperforming alternative approaches including models with more complex agentic scaffolds. These results demonstrate that simple RL succeeds when environments scale.

Long-horizon mobile manipulation presents significant challenges due to compounding execution errors and capacity interference between locomotion and arm control. While recent Vision-Language-Action models excel at short-horizon tasks, they lack the hierarchical reasoning required for multi-stage objectives. Furthermore, existing hierarchical agents suffer from rigid sub-task mapping, inflexible replanning, and a lack of continuous learning. To address these limitations, we introduce MobiAgent, a dual-loop agentic framework that bridges robust deployment execution and recursive policy self-improvement. During deployment, the Inner Loop decouples high-level reasoning from low-level control through highly composable atomic skills. It employs Vision-Language models for receding-horizon planning and visual reflection, dynamically composing skills to ensure robust error recovery. These skills are executed by specialized flow-matching experts that share a unified VLM backbone, maximizing reusability while mitigating capacity interference. Concurrently, the Outer Loop drives automated lifelong learning by autonomously segmenting and verifying deployment rollouts, clustering them to discover atomic skills, and continuously fine-tuning the skill library without human annotations. Evaluations on RoboCasa, BEHAVIOR-1K, and real-world tasks demonstrate the effectiveness of MobiAgent. It outperforms π_{0.5}-TA by 22.5 percentage points on BEHAVIOR-1K and enables robust recovery from execution failures. Through autonomous data recycling, success improves from 7.50% to 27.50% on RoboCasa and from 32.5% to 57.5% on Astribot S1.

Continuous Integration and Continuous Deployment (CI/CD) pipelines are central to modern software delivery, yet their static workflows often introduce inefficiencies as systems scale. This paper proposes a reinforcement learning (RL) based approach to dynamically optimize CI/CD pipeline workflows. The pipeline is modeled as a Markov Decision Process, and an RL agent is trained to make runtime decisions such as selecting full, partial, or no test execution in order to maximize throughput while minimizing testing overhead. A configurable CI/CD simulation environment is developed to evaluate the approach across build, test, and deploy stages. Experimental results show that the RL optimized pipeline achieves up to a 30 percent improvement in throughput and approximately a 25 percent reduction in test execution time compared to static baselines, while maintaining a defect miss rate below 5 percent. The agent learns to selectively skip or abbreviate tests for low risk commits, accelerating feedback cycles without significantly increasing failure risk. These results demonstrate the potential of reinforcement learning to enable adaptive and intelligent DevOps workflows, providing a practical pathway toward more efficient, resilient, and sustainable CI/CD automation.

Advanced compiler technology is crucial for enabling machine learning applications to run on novel hardware, but traditional compilers fail to deliver performance, popular auto-tuners have long search times and expert-optimized libraries introduce unsustainable costs. To address this, we developed LoopTune, a deep reinforcement learning compiler that optimizes tensor computations in deep learning models for the CPU. LoopTune optimizes tensor traversal order while using the ultra-fast lightweight code generator LoopNest to perform hardware-specific optimizations. With a novel graph-based representation and action space, LoopTune speeds up LoopNest by 3.2x, generating an order of magnitude faster code than TVM, 2.8x faster than MetaSchedule, and 1.08x faster than AutoTVM, consistently performing at the level of the hand-tuned library Numpy. Moreover, LoopTune tunes code in order of seconds.

The multi-head self-attention mechanism of the transformer model has been thoroughly investigated recently. In one vein of study, researchers are interested in understanding why and how transformers work. In another vein, researchers propose new attention augmentation methods to make transformers more accurate, efficient and interpretable. In this paper, we combine these two lines of research in a human-in-the-loop pipeline to first discover important task-specific attention patterns. Then those patterns are injected, not only to smaller models, but also to the original model. The benefits of our pipeline and discovered patterns are demonstrated in two case studies with extractive summarization and topic segmentation. After discovering interpretable patterns in BERT-based models fine-tuned for the two downstream tasks, experiments indicate that when we inject the patterns into attention heads, the models show considerable improvements in accuracy and efficiency.

Terminal agents are increasingly deployed beyond software engineering in science and other specialized domains. Constructing training environments requires executable reference behavior and a domain-specific verifier that distinguishes semantic correctness from superficially plausible artifacts. Authoring these components for each task requires repeated engineering and limits reuse. We introduce software-in-the-loop reconstruction, a self-supervised framework that obtains reference outputs and verification targets from existing software workflows, executable programs mapping structured inputs to outputs. For each workflow, we execute multiple input configurations and partition cases into public observations and hidden evaluations. Given the instruction, input schema, and public input--output observations, an agent constructs an editable program without access to the source workflow. The candidate is evaluated on hidden configurations against workflow outputs. A hierarchical verifier combines domain-specific semantic comparison, structural validity, and anti-shortcut checks, while public feedback supports iterative revision. The construction admits additional workflows and configurations without authoring a reference solution for each task. We instantiate SWR with 500 workflows and 46 software families across six domains. Across three attempts per task, Qwen3.8-Max solves 838 tasks and produces 1,422 verified trajectories, which we oversample to 3,000 reconstruction-only training examples. Supervised fine-tuning of Qwen3.8-27B improves mean Terminal-Bench 2 performance from 47.94% to 53.56% across three seeds and achieves the highest mean among four matched-token corpus controls on all four reported evaluations. These results indicate that existing scientific software can provide scalable, behaviorally verified supervision for terminal agents.

Scaling laws predict how loss decreases with increases in computation. We show, contrary to conventional wisdom, that architectural interventions can modify scaling exponents in pre-training, leading to power-law improvements in performance as computation increases. As an anchoring point, we consider the architectural formulation of looped transformers. Although not typically used in this way, looping, also known as recursive depth, provides a mechanism for model growth, by increasing the number of loops during training. Model growth, with and without shared weights, provides the biggest changes to the scaling exponents. In particular, a 7.4B model growth architecture matches GPT-3 13B on CORE with roughly 20times less compute, and has compute efficiency gains that increase with scale. Moreover, simply using a boundary operator in a vanilla transformer, which normalizes and injects an earlier block, also provides an exponent increase, although to a lesser extent. In the data-constrained, multi-epoch setting, standard looping has a useful regularizing effect, where we find it is compute-optimal to increase the number of loops with scale. These results can be understood through the lens of computational depth: for a given computational budget, we wish to increase the usable depth of the transformer, which can lead to efficiency gains that increase with scale.

Nowadays transformer-based Large Language Models (LLM) for code generation tasks usually apply sampling and filtering pipelines. Due to the sparse reward problem in code generation tasks caused by one-token incorrectness, transformer-based models will sample redundant programs till they find a correct one, leading to low efficiency. To overcome the challenge, we incorporate Experience Replay (ER) in the fine-tuning phase, where codes and programs produced are stored and will be replayed to give the LLM agent a chance to learn from past experiences. Based on the spirit of ER, we introduce a novel approach called BTP pipeline which consists of three phases: beam search sampling, testing phase, and prioritized experience replay phase. The approach makes use of failed programs collected by code models and replays programs with high Possibility and Pass-rate Prioritized value (P2Value) from the replay buffer to improve efficiency. P2Value comprehensively considers the possibility of transformers' output and pass rate and can make use of the redundant resources caused by the problem that most programs collected by LLMs fail to pass any tests. We empirically apply our approach in several LLMs, demonstrating that it enhances their performance in code generation tasks and surpasses existing baselines.

Agentic AI pipelines suffer from a hidden inefficiency: they frequently reconstruct identical intermediate logic, such as metric normalization or chart scaffolding, even when the user's natural language phrasing is entirely novel. Conventional boundary caching fails to capture this inefficiency because it treats inference as a monolithic black box. We introduce SemanticALLI, a pipeline-aware architecture within Alli (PMG's marketing intelligence platform), designed to operationalize redundant reasoning. By decomposing generation into Analytic Intent Resolution (AIR) and Visualization Synthesis (VS), SemanticALLI elevates structured intermediate representations (IRs) to first-class, cacheable artifacts. The impact of caching within the agentic loop is substantial. In our evaluation, baseline monolithic caching caps at a 38.7% hit rate due to linguistic variance. In contrast, our structured approach allows for an additional stage, the Visualization Synthesis stage, to achieve an 83.10% hit rate, bypassing 4,023 LLM calls with a median latency of just 2.66 ms. This internal reuse reduces total token consumption, offering a practical lesson for AI system design: even when users rarely repeat themselves, the pipeline often does, at stable, structured checkpoints where caching is most reliable.

We propose a novel model- and feature-based approach to development of vehicle software systems, where the end architecture is not explicitly defined. Instead, it emerges from an iterative process of search and optimization given certain constraints, requirements and hardware architecture, while retaining the property of single-system illusion, where applications run in a logically uniform environment. One of the key points of the presented approach is the inclusion of modern generative AI, specifically Large Language Models (LLMs), in the loop. With the recent advances in the field, we expect that the LLMs will be able to assist in processing of requirements, generation of formal system models, as well as generation of software deployment specification and test code. The resulting pipeline is automated to a large extent, with feedback being generated at each step.

Improving text-to-image models has traditionally relied on increasing model size or the number of denoising steps. In this work, we explore an alternative way to scale computation by repeatedly running shared Transformer blocks within each denoising step, effectively increasing computational depth while keeping the parameter count fixed. This looped computation enables iterative refinement of internal representations without explicit reasoning tokens. However, naive looping fails to consistently improve image quality. We trace this problem to weak supervision across intermediate loops and unregulated attention updates that progressively erode local information. To overcome these challenges, we propose Looped Diffusion Transformer (Looped-DiT), which combines deep supervision across intermediate loops with self-modulating attention to stabilize looped feature updates. Under matched-parameter and matched-compute settings, Looped-DiT consistently outperforms non-looped baselines. Notably, a 260M-parameter looped model can surpass a model 6.5x larger across multiple text-to-image benchmarks while requiring 4.9x lower inference compute. Beyond this performance gain, we find that looped computation can offer a more effective form of iterative computation for diffusion models, with increasing loop depth yielding larger gains than adding more denoising steps under a fixed inference budget. Furthermore, deeper loops can progressively correct mistakes made in earlier loops, exhibiting behaviors suggestive of latent reasoning. Together, these results show that looped computation offers a promising way to scale visual generation models.

Looped transformers increase effective depth by repeatedly applying a shared set of transformer layers, offering a parameter-efficient way to scale computation. However, standard residual connections aggregate information across recurrent depth into a single stream, providing limited control over which intermediate representations from preceding layers should be reused. In this paper, we introduce ARLoop, a looped transformer architecture based on attention residuals, where the input of each layer is selectively aggregated through attention over model depth. Distinct from standard transformers, we find that looped transformers do not require access to the full residual history: sliding-window depth attention matches or outperforms full-history attention at larger recurrent depths. Across controlled experiments with multiple parameter scales (140M and 370M) and recurrent depths (R = 1 to 5), ARLoop consistently outperforms prior residual designs for looped transformers. More importantly, we further scale ARLoop to 0.6B and 1.2B parameters under a realistic LLM pretraining recipe, demonstrating that the gains transfer to realistic pretraining, with particularly strong improvements on math and coding tasks. Our 1.2B model, pretrained on only 0.5T tokens with three recurrences, outperforms Huginn-3.5B (the only fully-open looped LLM as of our release date) across all evaluated tasks and is competitive with similar-sized non-looped models such as Qwen3.5-2B despite being trained on substantially less data.

Reliable agentic tool use requires training data that pair diverse multi-step workflows with executable evidence that the requested outcomes were achieved. Scaling either trajectory coverage or verification alone is insufficient as new environments introduce distinct states, rules, and dependencies that must also be reflected in the success criteria. To address this challenge, we introduce Davinci-Tool, a 30B tool-use model, and Davinci-ToolData, an execution-grounded dataset designed to scale environment coverage and outcome verification together. Davinci-ToolData preserves restorable states, execution traces, outcomes, and verifiers as a unified substrate for supervision. Two complementary pipelines populate this substrate: Execution-Grounded Task Synthesis (EGTS) derives verified demonstrations from independently authored systems, and Executable Environment Synthesis (EES) synthesizes auditable environments, state-grounded tasks, and executable verifiers across single and coordinated domains. These pipelines yield 30,395 verified trajectories spanning 2,260 invoked tool names. We first train on these demonstrations with supervised fine-tuning, then reuse EES states and verifiers to compare alternative actions and construct outcome-grounded preferences for Direct Preference Optimization. Davinci-Tool improves Qwen3-Coder-30B-A3B-Instruct from 52.4 to 88.2 on τ^2-bench, from 30.4 to 62.8 on BFCL v4 multi-turn, and from 16.9 to 56.2 on MCP-Atlas, outperforming Qwen3-Coder-480B-A35B-Instruct on all three benchmarks with only 1/16 of its total parameters. Code is available at https://github.com/MassLab-SII/Davinci-Tool.

In this paper, we argue that looped Transformers need their own residual connections to prevent performance degradation as the number of iterations grows. We observe that increasing loop iterations can reduce reasoning accuracy: noisy state updates overwrite correct intermediate deductions and even undo completed solutions. This leaves subsequent iterations to recover lost information from an already degraded representation: once an error arises in an earlier loop, often as a result of long-range propagation through the recurrence, later loops find it difficult to correct. In this paper, we introduce InfiLoop, a loop-native residual connection that learns which past computations to retain and how much to accept from each new update. InfiLoop combines content-based weighting with learned temporal decay to maintain a running summary of recurrent states. An exact streaming recurrence keeps its persistent aggregation memory constant as the loop count grows. The resulting adaptive update suppresses unreliable proposals and preserves useful intermediate states. Across extensive reasoning tasks, a 7M-parameter InfiLoop model outperforms existing recursive architectures, reaching 97.9% exact accuracy on Sudoku-Extreme, and 13.6% pass@2 on ARC-AGI-2. Notably, on Sudoku-Extreme, InfiLoop continues to improve with test-time looping beyond 20,000 effective steps, showing that added depth translates directly into stronger reasoning. Our code is available at https://github.com/pixeli99/InfiLoop.

As Deep Neural Networks (DNNs) grow in size and complexity, they often exceed the memory capacity of a single accelerator, necessitating the sharding of model parameters across multiple accelerators. Pipeline parallelism is a commonly used sharding strategy for training large DNNs. However, current implementations of pipeline parallelism are being unintentionally bottlenecked by the automatic differentiation tools provided by ML frameworks. This paper introduces 2-stage backpropagation (2BP). By splitting the backward propagation step into two separate stages, we can reduce idle compute time. We tested 2BP on various model architectures and pipelining schedules, achieving increases in throughput in all cases. Using 2BP, we were able to achieve a 1.70x increase in throughput compared to traditional methods when training a LLaMa-like transformer with 7 billion parameters across 4 GPUs.

Repeating a small block of middle layers increases a language model's effective inference depth without adding parameters or generating extra tokens, and recent work shows that this latent recurrence improves reasoning. However, two design choices limit these gains. Each iteration sees only the previous output and cannot directly access earlier computations. Moreover, a fixed loop count wastes depth on easy inputs while leaving hard ones with too little computation. We introduce RecurTrace, which addresses both limitations using the loop's own trajectory. Specifically, Loop Memory Attention lets each looped layer attend to its own states from previous iterations along the loop-time axis, so the model can revisit earlier computations instead of relying on the latest state alone. A halting head then reads the loop state and predicts whether to continue, with supervision from an oracle that identifies when additional depth still reduces loss. In a controlled MathQA comparison on the same looped backbone, RecurTrace achieves 56.9% accuracy with an average of 2.0 loops, exceeding the best fixed loop depth by 2.2 points at matched compute. By comparison, ACT and PonderNet collapse to one loop, and CALM reaches only 54.1% with 5.6 loops, while the stronger LoopUS-Conf and TaH-Mismatch baselines reach 55.3% at 3.2 loops and 55.7% at 2.1 loops. Finally, RecurTrace improves generation accuracy over same-budget fine-tuned baselines at 0.6B, 1.7B, 4B, and 8B, with the gain growing with model size from 0.6 to 3.4 points.

We introduce training-free looped transformers, in which a lightweight inference-time wrapper loops a contiguous mid-stack block of layers of a frozen checkpoint without additional fine-tuning, continued training, or architectural changes. Unlike prior looped transformer methods that train with the looped structure end-to-end, we retrofit recurrence onto pretrained models at test time. We show that naive block reapplication usually degrades performance, highlighting the importance of the loop application strategy. Motivated by viewing a pre-norm transformer block as a forward Euler step on an ODE, we instead treat looping as a refinement of the same approximation, replacing one large update with smaller damped sub-steps. Across seven dense, sparse MoE, and MLA+MoE model families, our method improves Qwen3-4B-Instruct by +2.64 pp on MMLU-Pro, Qwen3-30B-A3B-Instruct by +1.14 pp on CommonsenseQA, and Moonlight-16B-A3B-Instruct by +1.20 pp on OpenBookQA.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Looped language models repeat a set of transformer layers through depth, reducing memory costs and providing natural early-exit points at loop boundaries. However, looped models do not scale as favorably as standard transformers with unique layers. We compare standard and Mixture-of-Experts (MoE) transformers, with and without looping, and find two main results. First, we find Looped-MoE models scale better than the standard baseline while dense looped models do not. We trace this to routing divergence between loops: in Looped-MoE models, different experts are activated on each pass through the same shared layers, recovering expressivity without additional parameters. Our second finding is that looped models have better compute-quality trade-offs with early exits than standard models. Because each loop ends with the same layers that produce the final output, loop boundaries are superior exit points, as confirmed by earlier output convergence at these points. In sum, we provide a clear direction for scaling looped models: a Looped-MoE model with early exits can not only beat standard transformers at scale, but also enable significant memory and inference savings with minimal degradation in quality.

Modern Intel AI PCs ship capable integrated GPUs and NPUs with 16+ GB of unified memory, and they spend considerable time idle. That is not enough memory to fit a large model such as a 70B-parameter LLM. We show that a handful of AIPCs, working together over an ordinary network, can serve models beyond the capability of any single one. We use pipeline parallelism: a model is split by layer into per-stage shards, each pre-compiled into an OpenVINO graph, so that every machine runs one shard and passes activations to the next. Three techniques make this fast enough to be useful. First, we recover the speed of the unsplit model: a naive per-stage export runs well below monolithic inference because it misses an OpenVINO GPU optimization, and injecting a beam_idx Gather into each shard triggers that optimization (the IndirectKVCache fusion) and brings the shards to parity. Second, we leverage speculative decoding on stateful OpenVINO models. Third, the pipeline serves several users at once by interleaving their requests across the stages, each request carrying its own cache (micro-batching). Together, a two-node Llama 3.1 8B INT4 pipeline serves two concurrent users at 1.79x the single-user throughput of the unsplit model on the same hardware, and the gap widens under simulated wide-area latency. The same design scales to a 70B model that no single fleet member can hold: a four-node deployment of Lunar Lake AI PCs on Intel Tiber Cloud serves a single user at interactive speed, with output token-for-token identical to the same four-node pipeline decoding without speculation. Code, raw benchmark logs, and reproduction scripts ship as a self-contained package at https://github.com/labscommunity/pipeline-sharded-inference-paper (in the top-level reproduction/ directory).

We introduce Breadth-First Pipeline Parallelism, a novel training schedule which optimizes the combination of pipeline and data parallelism. Breadth-First Pipeline Parallelism lowers training time, cost and memory usage by combining a high GPU utilization with a small batch size per GPU, and by making use of fully sharded data parallelism. Experimentally, we observed an increase of up to 43% in training throughput for a 52 billion-parameter model using a small batch size per GPU compared to Megatron-LM, which would reduce the training time and cost by the same amount on a large GPU cluster.

Efficient distributed training serves as a powerful catalyst and an essential foundation for the development of large-scale neural networks. In distributed training scenarios, various pipeline parallelism methods are cleverly designed and widely employed. In this paper, we propose ZeroPP, a highly efficient and flexible pipeline parallelism method that trades off pipeline bubbles, memory usage, and communication through adaptive scheduling units. ZeroPP achieves minimal pipeline bubbles by carefully staggering the computation tasks of forward, input gradient, and weight gradient within a scheduling unit. Additionally, ZeroPP optimizes the combination of pipeline parallelism and fully sharded data parallelism using a blockwise schedule. We conduct experiments with popular GPT-style models and observe up to a 30% increase in throughput compared to the state-of-the-art breath-first pipeline parallelism. Besides, our evaluation also demonstrates up to a 68% increase in throughput and a 10% reduction in memory consumption compared to the memory-efficient 1F1B method.

The general capabilities of Large Language Models (LLM) highly rely on the composition and selection on extensive pretraining datasets, treated as commercial secrets by several institutions. To mitigate this issue, we open-source the details of a universally applicable data processing pipeline and validate its effectiveness and potential by introducing a competitive LLM baseline. Specifically, the data processing pipeline consists of broad collection to scale up and reweighting to improve quality. We then pretrain a 7B model BaichuanSEED with 3T tokens processed by our pipeline without any deliberate downstream task-related optimization, followed by an easy but effective supervised fine-tuning stage. BaichuanSEED demonstrates consistency and predictability throughout training and achieves comparable performance on comprehensive benchmarks with several commercial advanced large language models, such as Qwen1.5 and Llama3. We also conduct several heuristic experiments to discuss the potential for further optimization of downstream tasks, such as mathematics and coding.

Looped Transformers repeatedly apply the same set of Transformer layers, giving them a recurrent architecture for latent computation. Their strong performance on iterative reasoning and length-generalization tasks suggests an appealing explanation: recurrence may provide an inductive bias that lets the model reuse a learned algorithm across loops. However, weight sharing alone does not imply that every loop performs the same operation. This raises a basic question: is each loop actually repeating the same computation, and if not, what routes the shared parameters to different operations? We study this question using graph walks as a test case. In the model's native trajectories, decoded predictions can advance by different numbers of graph steps or remain at a reached target, showing that recurrent progress need not follow a fixed one-loop-one-step pattern. We then show that a frozen loop can be steered toward different transitions by modifying its entering hidden state: a learned linear layer J selects the desired transition without changing the shared Transformer layers. To test how this steering works, we use activation patching and find that attention patterns can recover its effects and switch the selected transition. Across five matched pairs of graph models, changing intermediate supervision during backbone training changes which transitions J can induce. This suggests that J selects computations learned by the backbone rather than creating new algorithms. Together, these results show that the hidden state can control shared computation, with attention routing as a causal pathway.

Large Language Models (LLMs) are powerful but often too slow and costly for real-world use during inference. Looped transformers save on parameters by reusing the same weights for multiple computational steps, or "loops." However, this approach has a major flaw: the loops run one after another, causing inference latency and memory requirements to increase with each added loop. This makes them impractical for fast applications. To solve this problem, we introduce the Parallel Loop Transformer (PLT). PLT is a new architecture that delivers the performance benefits of a deep, looped model but with the low latency of a standard, non-looped model. PLT works using two key techniques. First, Cross-Loop Parallelism (CLP) breaks the sequential dependency by computing different loops for different tokens at the same time, all within a single pass. Second, to prevent memory costs from growing, we use an Efficient Representation Enhancement strategy. This method shares the memory (KV cache) from the first loop with all other loops. It then uses a Gated Sliding-Window Attention (G-SWA) to combine this shared global information with local information, maintaining high accuracy. Our experiments show that PLT achieves the high accuracy of a traditional looped model but with almost no extra latency or memory cost compared to a standard transformer.

Humans and machines often solve harder problems by spending more time on computation. In deep learning, looped models implement this idea during inference by recurrently updating a hidden state. In practice, however, their training backpropagates through only one or a few updates, making it hard to train early updates to support future ones. We propose looped flows, an approach that sidesteps this issue by training the recurrence with local denoising objectives. By imposing temporal association across denoising objectives through progressively decreasing noise levels and shared noise, the model is incentivized to learn recurrent states that transfer useful computation over time, even when gradients cover only a few updates. We then formulate inference as integrating the velocity of a probability flow parameterized by the learned denoiser, coupled with recurrent states. This allows solving harder problems by spending more computation through a finer temporal grid and enables multiple valid predictions from different initial noise samples. Across six reasoning benchmarks including two multi-solution benchmarks, looped flows outperform prior state-of-the-art looped models overall, achieving 58.8% test accuracy on ARC-AGI-1 and 12.2% on ARC-AGI-2.

Single-token autoregressive decode on CPUs is bound by memory bandwidth, not arithmetic: a modern CPU sustains roughly 1 TFLOP/s of compute but only about 50 GB/s from main memory, and each generated token must stream every active weight once. This report argues that the most effective response is to co-design the model architecture and the inference runtime together. It presents cflow, a CPU-first streaming engine, alongside a family of pipeline-native transformer architectures whose inter-layer dependency graphs are constructed to permit a vertical, stage-major execution schedule. cflow stores weights as L2-sized tiles in compute-consumption order, reads only the top-k experts of each mixture-of-experts layer, fuses projections, and executes a delay-aware schedule from per-model dependency parameters. Across five architectures trained on TinyStories, one (arch2_4_combined) achieves a 2.00x reduction in critical-path weight bandwidth (9.00 to 4.50 MB/token) within 0.24 perplexity of the best candidate, and the tile layout incurs 7.29x fewer L1-data read misses than a row-major baseline. On a 30.9-billion-parameter pipeline-native MoE, cflow decodes at 5.94 tokens/s (tok/s) on a 32-vCPU Ice Lake server, ahead of llama.cpp (4.75) and the vLLM CPU backend (1.65) on comparably sized dense models. Realizing the expert-delay window as asynchronous I/O overlap on a disk-resident expert tier yields a further net win of up to 1.68x, matching the overlap model within 1%. Measurement refutes one of the eight design claims and leaves a second inconclusive; both are reported in full, with the conditions under which they would hold.

Large language model (LLM) merging has become a key technique in modern LLM development pipelines, enabling the integration of multiple task- or domain-specific expert models without retraining. However, as the number of experts grows, existing merging implementations treat model parameters as unstructured files and execute merges in a stateless, one-shot manner, leading to excessive disk I/O, redundant parameter scans, and poor scalability. In this paper, we present MergePipe, a parameter management system for scalable LLM merging. MergePipe is the first system that treats LLM merging as a data management and execution problem, and introduces a catalog-driven abstraction over model parameters, merge plans, and execution lineage. At its core, MergePipe employs a cost-aware planner that explicitly models expert parameter I/O and enforces user-specified I/O budgets, followed by a streaming execution engine that materializes merged models under transactional guarantees. Our key insight is that while base model reads and output writes are unavoidable, expert parameter reads dominate merge cost and constitute the primary optimization target. By making expert access budget-aware throughout planning and execution, MergePipe mitigates the O(K) I/O growth of naive pipelines and achieves predictable scaling behavior. Experiments show that MergePipe reduces total I/O by up to an order of magnitude and delivers up to 11times end-to-end speedups (up to 90\% wall-time reduction) over state-of-the-art LLM merging pipelines.

Looped transformers are a parameter-efficient alternative to standard transformers for language modeling. By reapplying the same layers across multiple loop steps, recent looped language models match the performance of non-looped models several times their size. While this architecture effectively reduces parameter memory, each loop step still stores its own keys and values, so the key-value (KV) cache grows linearly with the number of loop steps and becomes the main memory bottleneck. We observe that the KV cache of looped models is highly redundant along the loop axis and that the loop steps differ substantially in their sensitivity to quantization. Based on these observations, we propose LoopVQ, a KV cache vector quantization method for looped transformers that codes channels of multiple loop steps jointly, and fine-tunes the codebooks to match the output of the full-precision model. At 0.5 bits per element, LoopVQ outperforms existing KV cache vector quantization methods for standard LLMs on general, long chain-of-thought reasoning, and long-context retrieval tasks with Ouro and Huginn models. Its design is orthogonal to these methods, and combined with TaSQ, it retains much of the BF16 accuracy even at 0.25 bits per element. We also implement LoopVQ in SGLang, where it nearly halves the decode latency at a 32K-token context and raises the peak serving throughput by up to 4.3times and 6.1times on the 1.4B and 2.6B Ouro models compared to the BF16 baseline.

Tool-calling agents are increasingly deployed in real-world customer-facing workflows. Yet most studies on tool-calling agents focus on idealized settings with general, fixed, and well-specified tasks. In real-world applications, user requests are often (1) ambiguous, (2) changing over time, or (3) infeasible due to policy constraints, and training and evaluation data that cover these diverse, complex interaction patterns remain under-represented. To bridge the gap, we present Trajectory2Task, a verifiable data generation pipeline for studying tool use at scale under three realistic user scenarios: ambiguous intent, changing intent, and infeasible intents. The pipeline first conducts multi-turn exploration to produce valid tool-call trajectories. It then converts these trajectories into user-facing tasks with controlled intent adaptations. This process yields verifiable task that support closed-loop evaluation and training. We benchmark seven state-of-the-art LLMs on the generated complex user scenario tasks and observe frequent failures. Finally, using successful trajectories obtained from task rollouts, we fine-tune lightweight LLMs and find consistent improvements across all three conditions, along with better generalization to unseen tool-use domains, indicating stronger general tool-calling ability.

In manufacturing sectors such as textiles and electronics, manual processes are a fundamental part of production. The analysis and monitoring of the processes is necessary for efficient production design. Traditional methods for analyzing manual processes are complex, expensive, and inflexible. Compared to established approaches such as Methods-Time-Measurement (MTM), machine learning (ML) methods promise: Higher flexibility, self-sufficient & permanent use, lower costs. In this work, based on a video stream, the current motion class in a manual assembly process is detected. With information on the current motion, Key-Performance-Indicators (KPIs) can be derived easily. A skeleton-based action recognition approach is taken, as this field recently shows major success in machine vision tasks. For skeleton-based action recognition in manual assembly, no sufficient pre-work could be found. Therefore, a ML pipeline is developed, to enable extensive research on different (pre-) processing methods and neural nets. Suitable well generalizing approaches are found, proving the potential of ML to enhance analyzation of manual processes. Models detect the current motion, performed by an operator in manual assembly, but the results can be transferred to all kinds of manual processes.

The synthesis of inductive loop invariants remains a critical bottleneck in automated program verification. While Large Language Models (LLMs) show promise in mitigating this issue, they often fail on complex programs, producing invariants that are invalid or computationally ineffective. Although fine-tuning is a natural strategy to address these limitations, obtaining high-quality training data remains an open challenge. We first formalize the properties required for a high-quality training invariant, and then present Wonda, a rigorous data curation pipeline that extracts such invariants from raw verifier output via AST-based normalization followed by LLM-driven semantic rewriting and augmentation with provable quality guarantees. Fine-tuning Small Language Models (SLMs) on Wonda-curated data yields consistent gains across the Qwen3, Llama-3.1, and Mistral families: the 4B and 8B Qwen3 models nearly double invariant correctness and double speedup rates, while Llama-3.1-8B triples both. On the challenging InvBench suite, the same 4B model outperforms an off-the-shelf model 20x its size and matches the end-to-end verification time of GPT-OSS-120B, while a 14B Qwen3 model matches that of the frontier model GPT-5.2, all without test-time compute overhead. Our code is publicly available on GitHub.

Looped Transformers achieve strong performance with compact parameter sizes by repeatedly applying a shared stack of Transformer blocks across recurrent depths. However, they incur higher decoding latency than standard Transformer models of comparable parameter size because shared weights are accessed at every recurrent depth. To improve decoding efficiency, self-speculative decoding is particularly well suited to Looped Transformers, as their intermediate recurrent states can directly provide draft predictions without an auxiliary draft model. We therefore propose LoopSpec, a training-free self-speculative decoding framework tailored for Looped Transformers. LoopSpec extracts draft tokens from early recurrent states and operates in a pipelined manner, overlapping draft generation of future tokens with target verification of the current token. To improve draft accuracy without excessive compute overhead, we introduce a selective second proposal from deeper recurrent depth while ensuring lossless decoding under both greedy and sampling regimes. Furthermore, we derive the optimal proposal depths in closed form and show the prediction matches measurement. Across reasoning and coding benchmarks, LoopSpec achieves up to 6.83times inference speedup across diverse Looped Transformers.

Digital design requires predicting how a metal surface will look later in its oxidation; this paper presents such a pipeline for copper. Given a fixed-camera observation, the system forecasts appearance 10 accelerated units ahead and converts it into the albedo, normal, roughness and metallic maps a renderer consumes. Forecasting is evaluated as an authoring tool would use it, on a copper specimen the system has not observed: an entire recording is held out, so training and checkpoint selection use one specimen and the test set is the whole of a second, recorded on a different day and condition. Under this protocol a learned spatio-temporal model with a monotone oxidation state, the most accurate forecaster within a single recording, is less accurate than copying the last observed frame on an unseen specimen, in both directions, as are three further trained architectures. The only forecaster that transfers is a closed-form global color extrapolation with no trained parameters, improving on copy-last-frame by 13.4% and 50.6%, with a margin that increases with horizon to +16.7% and +55.5% at t+10. Two controls qualify this: correcting every frame for the photometric drift measured on a non-oxidizing reference region leaves both margins intact, ruling out uncontrolled exposure as their source, and a moving-block bootstrap over the 6 independent windows each recording contains separates the larger margin from zero but leaves the smaller one not individually significant. The mechanism is measured: a learned susceptibility map encodes where corrosion begins on the training specimen and misleads on a new one, whereas the global color trajectory is what specimens share. The pipeline therefore deploys the closed-form forecaster for unseen specimens and the learned model only for continuing one already observed. Code, splits, protocol and leakage audit are released.

Diffusion models have emerged as dominant performers for image generation. To support training large diffusion models, this paper studies pipeline parallel training of diffusion models and proposes DiffusionPipe, a synchronous pipeline training system that advocates innovative pipeline bubble filling technique, catering to structural characteristics of diffusion models. State-of-the-art diffusion models typically include trainable (the backbone) and non-trainable (e.g., frozen input encoders) parts. We first unify optimal stage partitioning and pipeline scheduling of single and multiple backbones in representative diffusion models with a dynamic programming approach. We then propose to fill the computation of non-trainable model parts into idle periods of the pipeline training of the backbones by an efficient greedy algorithm, thus achieving high training throughput. Extensive experiments show that DiffusionPipe can achieve up to 1.41x speedup over pipeline parallel methods and 1.28x speedup over data parallel training on popular diffusion models.

Traditional fixed-depth architectures scale quality by increasing training FLOPs, typically through increased parameterization, at the expense of a higher memory footprint, or data. A potential alternative is looped architectures, which instead increase FLOPs by sending activations through a block of layers in a loop. While promising, existing recipes for training looped architectures can be unstable, suffering from residual explosion and loss spikes. We address these challenges by recasting looping as a nonlinear time-variant dynamical system over the residual stream. Via a linear approximation to this system, we find that instability occurs in existing looped architectures as a result of large spectral norms in their injection parameters. To address these instability issues, we propose Parcae, a novel stable, looped architecture that constrains the spectral norm of the injection parameters via discretization of a negative diagonal parameterization. As a result, Parcae achieves up to 6.3% lower validation perplexity over prior large-scale looped models. Using our stable looped architecture, we investigate the scaling properties of looping as a medium to improve quality by increasing FLOPs in training and test-time. For training, we derive predictable power laws to scale FLOPs while keeping parameter count fixed. Our initial scaling laws suggest that looping and data should be increased in tandem, given a fixed FLOP budget. At test-time, we find that Parcae can use looping to scale compute, following a predictable, saturating exponential decay. When scaled up to 1.3B parameters, we find that Parcae improves CORE and Core-Extended quality by 2.99 and 1.18 points when compared to strong Transformer baselines under a fixed parameter and data budget, achieving a relative quality of up to 87.5% a Transformer twice the size.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

We tackle the challenge of training reliable code-fixing agents in real repositories, where complex builds and shifting dependencies make evaluation unstable. We developed a verifiable pipeline with success defined as post-fix build validation and improved reproducibility across ~1K real issues by pinning dependencies and disabling automatic upgrades. Building on this, we introduced a scalable simplified pipeline for large-scale reinforcement learning (RL). Using this setup, we supervised fine-tuned Qwen3-32B in the full pipeline and applied RL on top of the SFT model in the simplified environment. The SFT model distilled from GPT-4.1 trajectories performs on par while being 56x smaller, and RL added 7-20% absolute gains under matched train-test conditions. "Thinking mode" was on par or worse in our experiments. Both SFT and RL models failed to generalize across environments, highlighting the importance of matching train-test environments for building reliable real-world code-fixing agents.

In recent years, agentic orchestration has been widely applied to solve complex human tasks. However, existing orchestration learning still faces key challenges, including hand-designed curricula, advantage collapse when a task's rollouts all reach the same outcome, and unreliable evaluation signals that judge each skill by one noisy score. To address these challenges, we propose R^2Orch, a new paradigm of Recursive Self-Play Orchestration: an inner loop of self-play that improves the orchestrator on self-chosen tasks, and an outer loop that improves how the inner loop improves. To support this paradigm, we introduce Recursive Learnability, a training objective that rewards a Proposer for choosing tasks whose rollouts keep reaching different outcomes as skills are withdrawn. Built on this objective, we further propose Skill Withdrawal, in which the outer loop withdraws each skill once a controlled evaluation within self-play shows that the orchestrator performs as well without it. Moreover, the two loops form one cycle: failures are distilled into skills, skills into parameters, and withdrawals lead the Proposer to new failures, so the orchestrator moves toward zero-skill deployment. Experimental results on twelve datasets show that R^2Orch consistently outperforms baselines across question answering, math, code, and interactive tasks. Our code is available at https://github.com/beita6969/R2Orch.

While polyhedral compilers have shown success in implementing advanced code transformations, they still face challenges in selecting the ones that lead to the most profitable speedups. This has motivated the use of machine learning based cost models to guide the search for polyhedral optimizations. State-of-the-art polyhedral compilers have demonstrated a viable proof-of-concept of such an approach. While promising, this approach still faces significant limitations. State-of-the-art polyhedral compilers that use a deep learning cost model only support a small subset of affine transformations, limiting their ability to explore complex code transformations. Furthermore, their applicability does not scale beyond simple programs, thus excluding many program classes from their scope, such as those with non-rectangular iteration domains or multiple loop nests. These limitations significantly impact the generality of such compilers and autoschedulers and put into question the whole approach. In this paper, we introduce LOOPer, the first polyhedral autoscheduler that uses a deep learning based cost model and covers a large space of affine transformations and programs. LOOPer allows the optimization of an extensive set of programs while being effective at applying complex sequences of polyhedral transformations. We implement and evaluate LOOPer and show that it achieves competitive speedups over the state-of-the-art. On the PolyBench benchmarks, LOOPer achieves a geometric mean speedup of 1.84x over Tiramisu and 1.42x over Pluto, two state-of-the-art polyhedral autoschedulers.

Pipeline integrity is critical to industrial safety and environmental protection, with Magnetic Flux Leakage (MFL) detection being a primary non-destructive testing technology. Despite the promise of deep learning for automating MFL interpretation, progress toward reliable models has been constrained by the absence of a large-scale public dataset and benchmark, making fair comparison and reproducible evaluation difficult. We introduce PipeMFL-240K, a large-scale, meticulously annotated dataset and benchmark for complex object detection in pipeline MFL pseudo-color images. PipeMFL-240K reflects real-world inspection complexity and poses several unique challenges: (i) an extremely long-tailed distribution over 12 categories, (ii) a high prevalence of tiny objects that often comprise only a handful of pixels, and (iii) substantial intra-class variability. The dataset contains 240,320 images and 191,530 high-quality bounding-box annotations, collected from 11 pipelines spanning approximately 1,480 km. Extensive experiments are conducted with state-of-the-art object detectors to establish baselines. Results show that modern detectors still struggle with the intrinsic properties of MFL data, highlighting considerable headroom for improvement, while PipeMFL-240K provides a reliable and challenging testbed to drive future research. As the first public dataset and the first benchmark of this scale and scope for pipeline MFL inspection, it provides a critical foundation for efficient pipeline diagnostics as well as maintenance planning and is expected to accelerate algorithmic innovation and reproducible research in MFL-based pipeline integrity assessment.

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

Looped Language Models (LoopLMs) offer a parameter efficient approach to scaling reasoning by reusing shared parameters across recurrent computation steps. Despite their promise, effective post-training of LoopLMs remains challenging. Existing approaches either provide reward based supervision that is sparse or costly to extend across loops, or rely on external teachers or privileged information, leading to limited teacher availability or teacher-student context mismatch. To address these limitations, we introduce LoopOPD, a cross-loop on-policy distillation framework that uses additional recurrent computation within a LoopLM as its own source of supervision. LoopOPD uses a frozen terminal loop policy as a compute privileged teacher for an intermediate loop student on student generated rollouts, providing dense supervision without an external teacher or privileged information. We further propose Dynamic LoopOPD (D-LoopOPD), which continually refreshes the terminal loop teacher as the shared model parameters are updated, enabling recurrent self-improvement. We characterize how distillation updates propagate across loop depths and derive sufficient conditions under which a single update yields simultaneous local improvement at both loop depths. Experiments on Ouro-Thinking models show that LoopOPD improves mathematical reasoning, while D-LoopOPD yields further gains through dynamic teacher updates. Despite being trained only on mathematical data, the resulting models also improve on general reasoning and code generation benchmarks, demonstrating that recurrent computation can serve as an effective source of supervision for LoopLMs. Our code and model checkpoints will be released upon acceptance.

Despite recent advances in CUAs, their development remains constrained by the limited diversity, controllability, and reliability of interaction data. Moreover, conventional optimization pipelines lack iterative feedback, while existing recursive improvement approaches often rely on self-generated experiences, limiting ability expansion and yielding diminishing returns. To address these challenges, we introduce CUA-Master, a nested double-loop recursive improvement framework. At the system level, an outer world-data-model flywheel continuously incorporates open-world corpus and leverages evolving model weaknesses to guide subsequent data construction and optimization iterations. At the data level, an inner flywheel couples open-world seeding and autocatalytic propagation. The former mines authentic workflows as seed tasks from instructional videos, and employs visual-semantic dual-path trajectory reconstruction; The latter transforms these seeds into reusable primitives for controllable synthesis of diverse, complex, and verifiable tasks. To enable efficient and reliable trajectory collection, we further introduce a feedback-guided snapshot-rollback retry mechanism in various real environments. Extensive experiments demonstrate that CUA-Master-27B achieves competitive performance across GUI-only and GUI-CLI hybrid benchmarks, scoring 80.2 on OSWorld Verified, 36.9 on OSWorld 2.0, 43.9 on WeaveBench, and 25.0 on Agents' Last Exam. Our framework also substantially improves the quality and efficiency of data synthesis, and exhibits continuous gains across recursive iterations.

Modern machine learning (ML) has grown into a tightly coupled, full-stack ecosystem that combines hardware, software, network, and applications. Many users rely on cloud providers for elastic, isolated, and cost-efficient resources. Unfortunately, these platforms as a service use virtualization, which means operators have little insight into the users' workloads. This hinders resource optimizations by the operator, which is essential to ensure cost efficiency and minimize execution time. In this paper, we argue that workload knowledge is unnecessary for system-level optimization. We propose Reveal, which takes a hardware-centric approach, relying only on hardware signals - fully accessible by operators. Using low-level signals collected from the system, Reveal detects anomalies through an unsupervised learning pipeline. The pipeline is developed by analyzing over 30 popular ML models on various hardware platforms, ensuring adaptability to emerging workloads and unknown deployment patterns. Using Reveal, we successfully identified both network and system configuration issues, accelerating the DeepSeek model by 5.97%.

Large language models (LLMs) are increasingly used to automate data-processing workflows, yet coding agents typically produce scripts that are not automatically materialized as persistent, editable platform artifacts. We call this disconnect the NL2Pipeline gap. To bridge it, we introduce DataFlow-Harness, a platform that guides an LLM agent to construct platform-native directed acyclic graphs (DAGs) through typed, incremental mutations rather than free-form scripts. The platform combines DataFlow-Skills for procedural guidance, a Model Context Protocol (MCP) layer that exposes the live operator registry and current pipeline state, and DataFlow-WebUI, which synchronizes conversational authoring with a visual DAG editor. On a 12-task data-engineering benchmark, DataFlow-Harness achieves a 93.3\% observed end-to-end pass rate. Relative to Vanilla Claude Code, it reduces measured monetary cost by 72.5\% and generation latency by 49.9\%; its observed pass rate is within 0.9 percentage points of the Context-Aware Claude Code baseline while its cost is 42.8\% lower. Per-task analysis indicates that Skills are most useful when construction depends on implicit procedural knowledge. These results show that live platform grounding can produce persistent, editable workflow artifacts with an observed reliability close to script-generation baselines and with lower measured construction cost and latency.

Self-driving laboratories increasingly rely on low-cost liquid handlers such as the Opentrons OT-2, which ship without the pressure-based aspiration monitoring of Hamilton or Tecan systems and are typically run open-loop. Two failure modes go undetected: protocols that are syntactically valid but violate assay-specific invariants (e.g., tip reuse between a PCR template and a no-template control), and physical execution failures (partial dispense, air bubbles, missing tips) at runtime. We present AEGIS, a two-layer guardian for both. Layer 1 pairs a curated machine-readable assay rule database with an LLM that reasons over OT-2 Python code, reaching an adjusted F1 of 0.97 on a 24-protocol benchmark across five assay families and beating rules-only and LLM-only ablations across five backends; a free open-weight model ties the best proprietary one, so no paid API is required. Layer 2 fits a PCA world model to YOLO-cropped four-frame pipette trajectories; under a leakage-free leave-one-plate-out evaluation it reaches average precision 0.89 and operating-point F1 0.71 (AUROC 0.80), a deployment-faithful number that matches the live demonstration, and we characterize the small-pipette (p20) resolution limit (F1 0.47). A live demonstration on a physical OT-2 (five replicates per condition) catches planted no-tip failures deterministically and partial dispense on coloured dyes, with an always-VLM self-vote gate lifting partial-dispense recall to 5/5; transparent water is a principled limit of any front-view-only monitor, which AEGIS surfaces as low-confidence VLM reasoning rather than a wrong verdict. Cascade triage holds VLM cost near 1.63 per plate versus 10.33 for an always-VLM baseline. AEGIS is open source and, to our knowledge, the first system to unify pre-flight assay-aware validation with runtime visual monitoring for an open-source liquid handler.

Large language models (LLMs) face inherent performance bottlenecks under parameter constraints, particularly in processing critical tokens that demand complex reasoning. Empirical analysis reveals challenging tokens induce abrupt gradient spikes across layers, exposing architectural stress points in standard Transformers. Building on this insight, we propose Inner Thinking Transformer (ITT), which reimagines layer computations as implicit thinking steps. ITT dynamically allocates computation through Adaptive Token Routing, iteratively refines representations via Residual Thinking Connections, and distinguishes reasoning phases using Thinking Step Encoding. ITT enables deeper processing of critical tokens without parameter expansion. Evaluations across 162M-466M parameter models show ITT achieves 96.5\% performance of a 466M Transformer using only 162M parameters, reduces training data by 43.2\%, and outperforms Transformer/Loop variants in 11 benchmarks. By enabling elastic computation allocation during inference, ITT balances performance and efficiency through architecture-aware optimization of implicit thinking pathways.

Language model agents increasingly automate post-training, but when given the full training stack they converge on supervised fine-tuning and spend most effort revising training data. Existing systems give the agent one kind of control, selecting rows from a fixed pool or calling a generator, whereas a human data engineer adjusts proportions, prunes, repairs, replaces and synthesizes the data. We design a data action space for these changes and ask whether an automated system can make the full range rather than one of them, and what structure that requires. We first run this loop with a single agent, and it reaches only one action, adjusting category proportions, while its context fills with execution output and is discarded mid-search. We therefore introduce AutoSFT, a multi-agent system where a meta agent separates execution from analysis, gathers proposals from independent angles, and calls a synthesis subagent for capabilities the pool cannot cover, with the model, the trainer, and the budget fixed within each comparison. Adding each component in turn helps: the executor halves context loss, the analysis subagents lift the best IFEval by +6.5, and synthesis adds +3.4 IFEval and +2.9 IFBench. The same loop transfers to code, where analysis adds +3.7 MBPP+ over a single agent that does not improve. Every result comes from runs that retrain from the base model each round, so each component's effect is individually attributable. Our findings suggest that automating SFT data research depends more on covering diverse data actions than on a stronger single action.

Large-scale language models have become increasingly challenging and expensive to train. Among various methods addressing this issue, Pipeline Parallelism has been widely employed to accommodate massive model weights within limited GPU memory. This paper introduces Hanayo, a wave-like pipeline parallelism strategy that boasts a concise structure and practical applicability, alongside a high-performance pipeline execution runtime to tackle the challenges of pipeline strategy implementation. Hanayo mitigates the issues of pipeline bubbles and excessive memory consumption prevalent in existing schemes, without resorting to model duplicates as in Chimera. Our evaluation, conducted on four distinct computing clusters and involving both GPT-like and BERT-like architectures with up to 32 GPUs, demonstrates up to a 30.4 \% increase in throughput compared to the state-of-the-art approach.

We present a framework for using transformer networks as universal computers by programming them with specific weights and placing them in a loop. Our input sequence acts as a punchcard, consisting of instructions and memory for data read/writes. We demonstrate that a constant number of encoder layers can emulate basic computing blocks, including embedding edit operations, non-linear functions, function calls, program counters, and conditional branches. Using these building blocks, we emulate a small instruction-set computer. This allows us to map iterative algorithms to programs that can be executed by a looped, 13-layer transformer. We show how this transformer, instructed by its input, can emulate a basic calculator, a basic linear algebra library, and in-context learning algorithms that employ backpropagation. Our work highlights the versatility of the attention mechanism, and demonstrates that even shallow transformers can execute full-fledged, general-purpose programs.

The application of Transformer-based large models has achieved numerous success in recent years. However, the exponential growth in the parameters of large models introduces formidable memory challenge for edge deployment. Prior works to address this challenge mainly focus on optimizing the model structure and adopting memory swapping methods. However, the former reduces the inference accuracy, and the latter raises the inference latency. This paper introduces PIPELOAD, a novel memory-efficient pipeline execution mechanism. It reduces memory usage by incorporating dynamic memory management and minimizes inference latency by employing parallel model loading. Based on PIPELOAD mechanism, we present Hermes, a framework optimized for large model inference on edge devices. We evaluate Hermes on Transformer-based models of different sizes. Our experiments illustrate that Hermes achieves up to 4.24 X increase in inference speed and 86.7% lower memory consumption than the state-of-the-art pipeline mechanism for BERT and ViT models, 2.58 X increase in inference speed and 90.3% lower memory consumption for GPT-style models.

Charts are a fundamental visualization format for structured data analysis. Enabling end-to-end chart editing according to user intent is of great practical value, yet remains challenging due to the need for both fine-grained control and global structural consistency. Most existing approaches adopt pipeline-based designs, where natural language or code serves as an intermediate representation, limiting their ability to faithfully execute complex edits. We introduce ChartE^{3}, an End-to-End Chart Editing benchmark that directly evaluates models without relying on intermediate natural language programs or code-level supervision. ChartE^{3} focuses on two complementary editing dimensions: local editing, which involves fine-grained appearance changes such as font or color adjustments, and global editing, which requires holistic, data-centric transformations including data filtering and trend line addition. ChartE^{3} contains over 1,200 high-quality samples constructed via a well-designed data pipeline with human curation. Each sample is provided as a triplet of a chart image, its underlying code, and a multimodal editing instruction, enabling evaluation from both objective and subjective perspectives. Extensive benchmarking of state-of-the-art multimodal large language models reveals substantial performance gaps, particularly on global editing tasks, highlighting critical limitations in current end-to-end chart editing capabilities.

The rapid expansion of Transformer-based large language models has dramatically increased the need for high-performance GPUs. As a result, there is growing demand for fast, accurate, and widely generalizable GPU performance models to support next-generation hardware selection and system-level exploration. However, current data-driven methods are limited, exhibiting poor generalization across hardware and inadequate modeling of complex production-level kernels common in modern inference stacks. To address these issues, we present PipeWeave, a unified GPU modeling framework. This approach first employs an analytical model to quantify a given kernel's demands on the GPU's heterogeneous instruction pipelines. These analytical features are then fed into a machine learning (ML) model to capture complex cross-pipeline interactions and resource dependencies, enabling high-fidelity performance prediction. Our evaluation across 11 GPU types from four generations of major architectures on two widely-used serving systems demonstrates that PipeWeave delivers high fidelity and strong generalizability. It achieves accurate predictions, with only 6.1% average error at the kernel level and 8.5% for end-to-end inference -- reducing the error of state-of-the-art methods by 6.7x and 4.4x, respectively. We also demonstrate PipeWeave's value "beyond simulation" by utilizing its performance ceiling to diagnose implementation shortcomings and guide the optimization of a production fused MoE Triton kernel, achieving up to 1.7x speedup. Code is available https://github.com/zksainx/pipeweave.

Looped transformers have demonstrated promising parameter efficiency by reusing layers for latent computation. Prior studies compare looped and non-looped models at matched parameters or per-token FLOPs. However, to the best of our knowledge, whether looping improves test-time scaling as outputs grow longer remains underexplored. Through post-training looped transformers, we study the accuracy-compute slope, measured as the accuracy gain per doubling of test-time decoding FLOPs. We find that existing looped transformers often yield steeper slopes than their non-looped baseline, yet underperform it at matched compute. While fixed-depth looping spends extra iterations on every token, our analysis shows that many tokens do not benefit from extra iterations. We therefore propose TaH2, which enables the model to focus extra iterations on the tokens that benefit from looping. It jointly post-trains the backbone and an iteration decider through lookahead depth supervision, which uses online labels indicating whether further iteration improves the prediction. TaH2 improves both the efficiency and attainable accuracy of test-time scaling. On challenging AIME benchmarks, TaH2 improves the accuracy-compute slope by 53% (2.74 vs. 1.79) over the non-looped baseline, exceeding the baseline's peak accuracy by about 3.4 points at matched test-time compute. As the maximum iteration depth increases, existing looped models largely plateau, while TaH2's gain over the non-looped baseline continues to grow from +2.8 points at depth 2 to +3.9 points at depth 8. Our code is available at https://github.com/thu-nics/TaH.

A main promise of looped language models is depth-adaptive inference. By looping a block of shared layers a variable number of times, the model can use less compute for "easy" tokens and more for "hard" ones. However, tokens with different numbers of loops cannot share a uniform forward pass and therefore cannot be handled by standard batching systems such as vLLM. The practical value of depth-adaptive inference thus hinges on whether batching can be made efficient. We introduce the first efficient method for depth-adaptive looped LMs via continuous depth batching (CDB), which forms new batches between loop steps. Our method dynamically schedules looped and non-looped parts of the architecture, manages looped KV-caching, and predicts which tokens will exit the loop in advance so it can prepare batches asynchronously. Experiments on Ouro 1.4B and Huginn 3.5B show that fully looped architectures are best suited to depth-adaptive inference, as large non-looped layers outside the recurrent core (e.g., token embedding, LM head, and unshared transformer blocks) slow down and complicate scheduling. Overall, CDB realizes up to 99% of the estimated maximum speedup available, leaving further gains primarily dependent on model architecture and exit behavior.

Looped transformers have emerged as a parameter-efficient alternative to scaling depth for strong reasoning. By reusing one stack of layers across T iterations, they attain the effective depth and reasoning capabilities of larger models at a fixed parameter count. Yet existing approaches suffer from latent overthinking and undifferentiated computation, largely because intermediate representations receive no guidance across loops. Multi-token prediction (MTP) supplies exactly the dense, forward-looking supervision the loop is missing. We propose LoopMTP, which links the two through a structural correspondence in latent space: a model that loops T times can anticipate T future tokens. LoopMTP realizes this by softly aligning the hidden state of loop t with the embedding of the token t steps ahead, while a lightweight gate preserves useful information across iterations. LoopMTP improves average accuracy by up to 8.1\% (relative) over the non-looped baseline, with training remaining stable for up to 15 loops.

While skill optimization for autonomous agents has gained traction, existing methods rely on complex pipelines. This leaves a fundamental question unaddressed: What constitutes a minimal viable pipeline for skill optimization, where every component is justified by theory or empirical necessity? We formalize skill optimization via Zeroth-Order (ZO) optimization, mapping classical counterparts (central difference, trust regions) to recent literature. Noting that unlike blind numerical perturbations in classical ZO, skill trajectories serve as interpretable debugging feedback. Grounded in Claude Code philosophy and PAC learning, we establish three principles for convergence and generalization: file-system-based trajectory exploration, consensus attribute mining, and independent validation gating. Eliminating redundancies, we propose SkillOpt-Lite. It accelerates convergence and outperforms full SkillOpt: improving LiveMath by +8.8 points on GPT-5.5 and +25.4 points on GPT-5.4-nano, allowing the nano model to surpass standard GPT-5.4 optimized by SkillOpt. Finally, we integrate our framework into production coding agents like VSCode Copilot, enabling developers to evolve agent skills via one line of vibe. Because our framework treats all agent components simply as standard editable code, this minimal pipeline naturally generalizes to full harness optimization (HarnessOpt). On SpreadsheetBench, HarnessOpt enables GPT-5.4-nano to achieve 0.7758 accuracy, outperforming the larger GPT-5.5 running standard pipelines (0.7620). Code is available at https://github.com/EvolvingLMMs-Lab/SkillOpt-Lite.

Looped transformers reuse a shared block of layers to increase computational depth without increasing the number of trainable parameters. They are trained with backpropagation through time (BPTT). To save training compute, BPTT is often truncated to the last few loops, but truncation yields biased gradients that may weaken the benefit of looping. In this work, we study the value of truncation in looped transformer training in a systematic way: we jointly vary model size, training tokens, and forward and backward loop counts across nearly 600 training runs and fit a unified scaling law that captures the effects of looping and truncation through effective parameters. Despite the training-compute savings of truncation, our fitted law favors full BPTT when forward and backward loop counts are jointly optimized. In matched-compute runs, full BPTT through fewer loops consistently outperforms truncated settings of the same compute. The law further shows that at fixed model size, the compute-optimal loop count and training-token budget both grow with compute. When model size is also free, the law identifies two fully trained loops as the best looped setting. Experimentally, this setting achieves lower validation loss than the compute-optimal non-looped model with about 27% fewer non-embedding parameters and only 8% more training compute.

The increasing usage of Large Language Models (LLMs) has resulted in a surging demand for planet-scale serving systems, where tens of thousands of GPUs continuously serve hundreds of millions of users. Consequently, throughput (under reasonable latency constraints) has emerged as a key metric that determines serving systems' performance. To boost throughput, various methods of inter-device parallelism (e.g., data, tensor, pipeline) have been explored. However, existing methods do not consider overlapping the utilization of different resources within a single device, leading to underutilization and sub-optimal performance. We propose NanoFlow, a novel serving framework that exploits intra-device parallelism, which overlaps the usage of resources including compute, memory, and network within a single device through operation co-scheduling. To exploit intra-device parallelism, NanoFlow introduces two key innovations: First, NanoFlow splits requests into nano-batches at the granularity of operations, which breaks the dependency of sequential operations in LLM inference and enables overlapping; then, to get benefit from overlapping, NanoFlow uses an operation-level pipeline with execution unit scheduling, which partitions the device's functional units and simultaneously executes different operations in each unit. NanoFlow automates the pipeline setup using a parameter search algorithm, which enables easily porting NanoFlow to different models. We implement NanoFlow on NVIDIA GPUs and evaluate end-to-end serving throughput on several popular models such as LLaMA-2-70B, Mixtral 8x7B, LLaMA-3-8B, etc.. With practical workloads, NanoFlow provides 1.91x throughput boost compared to state-of-the-art serving systems achieving 59% to 72% of optimal throughput across ported models.

Large-scale LLM pretraining now runs across 10^5--10^6 accelerators, making failures routine and elasticity mandatory. We posit that an elastic-native training system must jointly deliver (i) parameter consistency, (ii) low mean time to recovery (MTTR), (iii) high post-change throughput, and (iv) computation consistency. No prior system achieves all four simultaneously. To achieve these goals, we present ElasWave, which delivers per-step fault tolerance via multi-dimensional scheduling across graph, dataflow, DVFS, and RNG. ElasWave reshapes and reshards micro-batches while preserving the global batch size and gradient scale. It performs online pipeline resharding with asynchronous parameter migration and interleaves ZeRO partitions, reducing parameter recovery processes to disjoint rank-to-rank transfers. It further leverages DVFS to absorb pipeline bubbles and reshards RNG to keep computation consistency. Together, a dynamic communicator enables in-place communication group edits, while per-step in-memory snapshots support online verification and redistribution. We evaluate ElasWave on 96 NPUs and benchmark it against state-of-the-art baselines: throughput improves by 1.35times over ReCycle and 1.60times over TorchFT; communicator recovery completes within one second (up to 82times/3.6times faster than full/partial rebuilds); migration MTTR drops by as much as 51%; and convergence deviation is reduced by approximately 78%.

We introduce Dory1.0-4B, a 4-billion-parameter looped (latent-recurrent) language model with elastic depth: a single checkpoint serves different inference compute budgets. Dory1.0-4B is built on a normalized Transformer (nGPT) backbone with interleaved sliding-window and full-attention layers, organized into an input block, a shared recurrent block, and an output block. At inference, the recurrent block can be applied a variable number of times. We pre-trained Dory1.0-4B on 6 trillion tokens. The first 4.5 trillion tokens were trained in NVFP4, and additional pre-training then extended the context length to 256K tokens. Next, we post-trained the model using Supervised Fine-Tuning (SFT) and Reinforcement Learning with Verifiable Rewards (RLVR), with a difficulty-aware loop curriculum that routes harder prompts to deeper loops. Increasing the loop count improves accuracy, with the largest gains on coding, agentic, and long-context benchmarks. With two or more loops, Dory1.0-4B outperforms larger models such as Qwen3.5-9B, Gemma 4 12B, and Gemma 4 26B-A4B on average across 12 benchmarks. Looping also makes Dory1.0-4B more token-efficient on agentic benchmarks: with four loops, it generates 1.3-2.5x fewer tokens than with one loop, as the extra computation is spent in latent space rather than on longer outputs. To reduce memory during looping, Dory1.0-4B caches keys and values only from the last loop, keeping its KV-cache footprint equal to that of a non-looped model at any loop count while retaining most of the accuracy gains. We open-source the BF16, MXFP8, NVFP4, and GGUF quantized checkpoints.

Finding the optimal pass sequence of compilation can lead to a significant reduction in program size and/or improvement in program efficiency. Prior works on compilation pass ordering have two major drawbacks. They either require an excessive budget (in terms of compilation steps) at compile time or fail to generalize to unseen programs. In this paper, for code-size reduction tasks, we propose a novel pipeline to find program-dependent pass sequences within 45 compilation calls. It first identifies a coreset of 50 pass sequences via greedy optimization of a submodular function, and then learns a policy with Graph Neural Network (GNN) to pick the optimal sequence by predicting the normalized values of the pass sequences in the coreset. Despite its simplicity, our pipeline outperforms the default -Oz flag by an average of 4.7% over a large collection (4683) of unseen code repositories from diverse domains across 14 datasets. In comparison, previous approaches like reinforcement learning on the raw pass sequence space may take days to train due to sparse reward, and may not generalize well in held-out ones from different domains. Our results demonstrate that existing human-designed compiler flags can be improved with a simple yet effective technique that transforms the raw action space into a small one with denser rewards.

Despite rapid advances in Large Language Models and Multimodal Large Language Models (LLMs), numerous challenges related to interpretability, scalability, resource requirements and repeatability remain, related to their application in the design-to-code space. To address this, we introduce the Large Design Models (LDMs) paradigm specifically trained on designs and webpages to enable seamless conversion from design-to-code. We have developed a training and inference pipeline by incorporating data engineering and appropriate model architecture modification. The training pipeline consists of the following: 1)Design Optimiser: developed using a proprietary ground truth dataset and addresses sub-optimal designs; 2)Tagging and feature detection: using pre-trained and fine-tuned models, this enables the accurate detection and classification of UI elements; and 3)Auto Components: extracts repeated UI structures into reusable components to enable creation of modular code, thus reducing redundancy while enhancing code reusability. In this manner, each model addresses distinct but key issues for design-to-code conversion. Separately, our inference pipeline processes real-world designs to produce precise and interpretable instructions for code generation and ensures reliability. Additionally, our models illustrated exceptional end-to-end design-to-code conversion accuracy using a novel preview match score metric. Comparative experiments indicated superior performance of LDMs against LLMs on accuracy of node positioning, responsiveness and reproducibility. Moreover, our custom-trained tagging and feature detection model demonstrated high precision and consistency in identifying UI elements across a wide sample of test designs. Thus, our proposed LDMs are a reliable and superior solution to understanding designs that subsequently enable the generation of efficient and reliable production-ready code.

Synthesizing inductive loop invariants is fundamental to automating program verification. In this work, we observe that Large Language Models (such as gpt-3.5 or gpt-4) are capable of synthesizing loop invariants for a class of programs in a 0-shot setting, yet require several samples to generate the correct invariants. This can lead to a large number of calls to a program verifier to establish an invariant. To address this issue, we propose a {\it re-ranking} approach for the generated results of LLMs. We have designed a ranker that can distinguish between correct inductive invariants and incorrect attempts based on the problem definition. The ranker is optimized as a contrastive ranker. Experimental results demonstrate that this re-ranking mechanism significantly improves the ranking of correct invariants among the generated candidates, leading to a notable reduction in the number of calls to a verifier.

Large language models (LLMs) are increasingly used as tool-augmented agents for multi-step decision making, yet training robust tool-using agents remains challenging. Existing methods still require manual intervention, depend on non-verifiable simulated environments, rely exclusively on either supervised fine-tuning (SFT) or reinforcement learning (RL), and struggle with stable long-horizon, multi-turn learning. To address these challenges, we introduce ASTRA, a fully automated end-to-end framework for training tool-augmented language model agents via scalable data synthesis and verifiable reinforcement learning. ASTRA integrates two complementary components. First, a pipeline that leverages the static topology of tool-call graphs synthesizes diverse, structurally grounded trajectories, instilling broad and transferable tool-use competence. Second, an environment synthesis framework that captures the rich, compositional topology of human semantic reasoning converts decomposed question-answer traces into independent, code-executable, and rule-verifiable environments, enabling deterministic multi-turn RL. Based on this method, we develop a unified training methodology that integrates SFT with online RL using trajectory-level rewards to balance task completion and interaction efficiency. Experiments on multiple agentic tool-use benchmarks demonstrate that ASTRA-trained models achieve state-of-the-art performance at comparable scales, approaching closed-source systems while preserving core reasoning ability. We release the full pipelines, environments, and trained models at https://github.com/LianjiaTech/astra.

The rapidly growing demand for high-quality data in Large Language Models (LLMs) has intensified the need for scalable, reliable, and semantically rich data preparation pipelines. However, current practices remain dominated by ad-hoc scripts and loosely specified workflows, which lack principled abstractions, hinder reproducibility, and offer limited support for model-in-the-loop data generation. To address these challenges, we present DataFlow, a unified and extensible LLM-driven data preparation framework. DataFlow is designed with system-level abstractions that enable modular, reusable, and composable data transformations, and provides a PyTorch-style pipeline construction API for building debuggable and optimizable dataflows. The framework consists of nearly 200 reusable operators and six domain-general pipelines spanning text, mathematical reasoning, code, Text-to-SQL, agentic RAG, and large-scale knowledge extraction. To further improve usability, we introduce DataFlow-Agent, which automatically translates natural-language specifications into executable pipelines via operator synthesis, pipeline planning, and iterative verification. Across six representative use cases, DataFlow consistently improves downstream LLM performance. Our math, code, and text pipelines outperform curated human datasets and specialized synthetic baselines, achieving up to +3\% execution accuracy in Text-to-SQL over SynSQL, +7\% average improvements on code benchmarks, and 1--3 point gains on MATH, GSM8K, and AIME. Moreover, a unified 10K-sample dataset produced by DataFlow enables base models to surpass counterparts trained on 1M Infinity-Instruct data. These results demonstrate that DataFlow provides a practical and high-performance substrate for reliable, reproducible, and scalable LLM data preparation, and establishes a system-level foundation for future data-centric AI development.

Neural networks are increasingly deployed in safety- and mission-critical pipelines, yet many verification and analysis results are produced outside the programming environment that defines and runs the model. This separation creates a semantic gap between the executed network and the analyzed artifact, so guarantees can hinge on implicit conventions such as operator semantics, tensor layouts, preprocessing, and floating-point corner cases. We introduce TorchLean, a framework in the Lean 4 theorem prover that treats learned models as first-class mathematical objects with a single, precise semantics shared by execution and verification. TorchLean unifies (1) a PyTorch-style verified API with eager and compiled modes that lower to a shared op-tagged SSA/DAG computation-graph IR, (2) explicit Float32 semantics via an executable IEEE-754 binary32 kernel and proof-relevant rounding models, and (3) verification via IBP and CROWN/LiRPA-style bound propagation with certificate checking. We validate TorchLean end-to-end on certified robustness, physics-informed residual bounds for PINNs, and Lyapunov-style neural controller verification, alongside mechanized theoretical results including a universal approximation theorem. These results demonstrate a semantics-first infrastructure for fully formal, end-to-end verification of learning-enabled systems.

Training LLMs on decentralized and wimpy computation nodes, e.g., multiple on-spot instances, lowers the training cost and enables model democratization. The inevitable challenge here is the churn of nodes due to failures and the operator's scheduling policies, leading to losing a stage - a part of the model. The conventional approaches to recover from failures are to either use checkpointing, where periodically a copy of the entire model is sent to an additional storage, or redundant computation. These approaches yield significant communication and/or computation overhead even in non-failure cases and scale poorly in settings with large models. In this paper, we propose, CheckFree, an efficient recovery method where a failing stage is substituted by a weighted average of the closest neighboring stages. In contrast to the state of the art, CheckFree requires no additional computation or storage. However, because of the nature of averaging neighbouring stages, it can only recover failures of intermediate stages. We further extend our method to CheckFree+ with out-of-order pipeline execution to tolerate crashes of the first and last stages. Thanks to out-of-order pipelining, behaviour of those stages is mimicked by their neighboring ones, which allows CheckFree+ to recover them by simply copying the weights from the immediate neighbour. To be able to recover the (de)embedding layers, CheckFree+ copies those layers to the neighboring stages, which requires relatively small storage overhead. We extensively evaluate our method on LLaMa models of model sizes from 124M to 1.5B with varying failure frequencies. In the case of low and medium failure rates (5-10%), CheckFree and CheckFree+ outperform both checkpointing and redundant computation in terms of convergence in wall-clock time by over 12%. Both of our proposals can be run via our code available at: https://github.com/gensyn-ai/CheckFree.

Pretraining data processing is critical to the downstream performance of Large Language Models (LLMs). However, many existing approaches define a fixed processing strategy at the corpus or domain level and apply it uniformly to many examples, without adapting to the needs of each example. We propose DataOrchestra, a framework that unifies different processing operations and orchestrates an example-specific pipeline for each example. Given a chunk of pretraining data, an orchestrator decides whether to drop, untouch, or clean it. For a chunk to be cleaned, it selects one or more downstream operations, ranging from programmatic editing to different forms of LLM-based rewriting. For each rewriting step, it further generates a concrete instruction, which is executed by the corresponding downstream tool model. We pretrain models from 0.5B to 7B from scratch on web data processed by DataOrchestra and observe stable average gains over individual data-processing methods across 11 benchmarks. DataOrchestra is also effective for math continued pretraining and outperforms stronger processing baselines, while reducing processing compute by skipping unnecessary downstream operations.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Transformer models serve as the backbone of many state-ofthe-art language models, and most use the scaled dot-product attention (SDPA) mechanism to capture relationships between tokens. However, the straightforward implementation of SDPA has quadratic compute and memory complexity with respect to the sequence length. On processor architectures such as GPUs and TPUs, there is a robust body of prior work. However, little work has been performed on non-processor architectures.In this work, we show how the architecture and execution model of Streaming Dataflow Accelerators can help tackle this challenge. We first define abstract hardware that adopts a streaming execution model, and we implement a cycle-accurate simulator of the abstract hardware using the Dataflow Abstract Machine simulation framework. Second, we implement the naive SDPA algorithm on this abstract hardware and show it requires linear (O(N)) intermediate memory. Third, we then modify the naive algorithm, taking inspiration from prior processor-oriented works, by reordering the multiplication and division operations. Finally, we map the modified algorithm to abstract hardware, and confirm that the implementation computes SDPA at full throughput while only using a constant amount (O(1)) of intermediate memory.

Modern GPUs feature specialized hardware units that enable high-performance, asynchronous dataflow execution. However, the conventional SIMT programming model is fundamentally misaligned with this task-parallel hardware, creating a significant programmability gap. While hardware-level warp specialization is the key to unlocking peak performance, it forces developers to manually orchestrate complex, low-level communication and software pipelines--a process that is labor-intensive, error-prone, and unsustainable. To address this challenge, we present Tawa, an automated compiler that systematically generates high-performance, warp-specialized code from a high-level, tile-based program. Central to our approach is a novel IR abstraction, asynchronous references (aref), which expresses warp-level communication without exposing low-level hardware details. Using this abstraction, Tawa automatically partitions programs into producer-consumer roles and manages the intricate dataflow pipeline, relieving developers of invasive kernel rewriting. Evaluation on NVIDIA H100 GPUs across representative LLM kernels shows that Tawa delivers high hardware utilization, achieving up to 1.1times speedup over highly optimized cuBLAS GEMM kernels. For attention workloads, Tawa attains 1.2times speedup over Triton and matches the performance of the hand-optimized CUTLASS C++ FlashAttention-3 kernel with far less programming effort.

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

Inference-Time Scaling (ITS) has largely succeeded in verifiable domains like math and coding, where cheap verification enables scalable output selection. However, extending ITS to tasks prone to systematic failure - driven by faulty initial assumptions or unmet multidimensional constraints - typically relies on costly external solvers or brittle, model-based verifiers. Our key insight is that the intrinsic statistics of parallel sample sets, specifically length-adjusted tail entropy, provide a robust discriminative signal for solution quality without access to ground truth. Crucially, these statistics serve as a difficulty gate for adaptive compute allocation, dynamically routing problems across scaling regimes. First, Intrinsic Selection (iS) ranks candidates post-hoc, matching consensus-based algorithms across three domains and improving engineering design selection by 20% over pass@1 baselines. Second, Intrinsic Particle Filtering (iPF) generalizes this to step-level resampling, guiding generation toward high-confidence reasoning trajectories to improve pass@1 by 6.1 points on average on hard math problems. Finally, Particle Distillation (dPF) injects privileged guidance via early logit blending and KL-guided resampling, steering generation past systematic reasoning errors to satisfy expert rubrics, yielding up to 26.5% gains on complex clinical responses. Our pipeline applies seamlessly across broad-purpose, domain-specialized, and multimodal architectures, successfully extending ITS to open-ended domains without requiring trained reward models or exact ground-truth verification.

In the past years, predictive process monitoring (PPM) techniques based on artificial neural networks have evolved as a method to monitor the future behavior of business processes. Existing approaches mostly focus on interpreting the processes as sequences, so-called traces, and feeding them to neural architectures designed to operate on sequential data such as recurrent neural networks (RNNs) or transformers. In this study, we investigate an alternative way to perform PPM: by transforming each process in its directly-follows-graph (DFG) representation we are able to apply graph neural networks (GNNs) for the prediction tasks. By this, we aim to develop models that are more suitable for complex processes that are long and contain an abundance of loops. In particular, we present different ways to create DFG representations depending on the particular GNN we use. The tested GNNs range from classical node-based to novel edge-based architectures. Further, we investigate the possibility of using multi-graphs. By these steps, we aim to design graph representations that minimize the information loss when transforming traces into graphs.