Daily Papers

Numerical reasoning over text (NRoT) presents unique challenges that are not well addressed by existing pre-training objectives. We explore five sequential training schedules that adapt a pre-trained T5 model for NRoT. Our final model is adapted from T5, but further pre-trained on three datasets designed to strengthen skills necessary for NRoT and general reading comprehension before being fine-tuned on the Discrete Reasoning over Text (DROP) dataset. The training improves DROP's adjusted F1 performance (a numeracy-focused score) from 45.90 to 70.83. Our model closes in on GenBERT (72.4), a custom BERT-Base model using the same datasets with significantly more parameters. We show that training the T5 multitasking framework with multiple numerical reasoning datasets of increasing difficulty, good performance on DROP can be achieved without manually engineering partitioned functionality between distributed and symbol modules.

Deepfakes are major threats to the integrity of digital media. We propose DeiTFake, a DeiT-based transformer and a novel two-stage progressive training strategy with increasing augmentation complexity. The approach applies an initial transfer-learning phase with standard augmentations followed by a fine-tuning phase using advanced affine and deepfake-specific augmentations. DeiT's knowledge distillation model captures subtle manipulation artifacts, increasing robustness of the detection model. Trained on the OpenForensics dataset (190,335 images), DeiTFake achieves 98.71\% accuracy after stage one and 99.22\% accuracy with an AUROC of 0.9997, after stage two, outperforming the latest OpenForensics baselines. We analyze augmentation impact and training schedules, and provide practical benchmarks for facial deepfake detection.

Pre-training large language models is known to be extremely resource intensive and often times inefficient, under-utilizing the information encapsulated in the training text sequences. In this paper, we present SpacTor, a new training procedure consisting of (1) a hybrid objective combining span corruption (SC) and token replacement detection (RTD), and (2) a two-stage curriculum that optimizes the hybrid objective over the initial tau iterations, then transitions to standard SC loss. We show empirically that the effectiveness of the hybrid objective is tied to the two-stage pre-training schedule, and provide extensive analysis on why this is the case. In our experiments with encoder-decoder architectures (T5) on a variety of NLP tasks, SpacTor-T5 yields the same downstream performance as standard SC pre-training, while enabling a 50% reduction in pre-training iterations and 40% reduction in total FLOPs. Alternatively, given the same amount of computing budget, we find that SpacTor results in significantly improved downstream benchmark performance.

Full-length song generation must preserve coherence and musicality, render detailed vocal and accompaniment acoustics, and follow lyrics and prompts. Existing language model-based systems face a structural trade-off: mixed-token modeling preserves vocal-instrument coordination but obscures track-specific details, whereas dual-track prediction improves acoustics but requires longer sequences and weakens global planning. We present LeVo 2, a hybrid LLM-Diffusion framework for controllable full-length song generation. LeVo 2 formulates this trade-off as hierarchical modeling: LeLM first predicts mixed tokens for semantic planning, then predicts vocal and accompaniment tokens in parallel for track-specific refinement, while a diffusion-based Music Codec reconstructs full-length waveforms. A central contribution of this extended version is an aesthetics-guided training schedule for alignment. During pre-training, an automated music aesthetic evaluation framework assigns musicality-tier conditions to large-scale data, providing musicality priors before preference alignment. Progressive post-training applies SFT, large-scale offline DPO, and closed-loop semi-online DPO to separately improve generation quality, controllability, and musicality. Modular extension then trains the Track-Specific LM for acoustic refinement while preserving the aligned semantic planner. This schedule separates musicality learning, controllability alignment, and acoustic refinement, mitigating optimization conflict and the limitations of static offline preference pairs. Expert listening tests and objective evaluations show that LeVo 2 outperforms open-source baselines across six subjective dimensions, and approaches leading commercial systems on several listening metrics. Ablations validate the effects of the training strategy, aesthetics guidance, scaling, and hierarchical architecture.

Efficiently training a multi-task neural solver for various combinatorial optimization problems (COPs) has been less studied so far. In this paper, we propose a general and efficient training paradigm based on multi-armed bandits to deliver a unified combinarotial multi-task neural solver. To this end, we resort to the theoretical loss decomposition for multiple tasks under an encoder-decoder framework, which enables more efficient training via proper bandit task-sampling algorithms through an intra-task influence matrix. Our method achieves much higher overall performance with either limited training budgets or the same training epochs, compared to standard training schedules, which can be promising for advising efficient training of other multi-task large models. Additionally, the influence matrix can provide empirical evidence of some common practices in the area of learning to optimize, which in turn supports the validity of our approach.

In today's interconnected globe, moving abroad is more and more prevalent, whether it's for employment, refugee resettlement, or other causes. Language difficulties between natives and immigrants present a common issue on a daily basis, especially in medical domain. This can make it difficult for patients and doctors to communicate during anamnesis or in the emergency room, which compromises patient care. The goal of the HYKIST Project is to develop a speech translation system to support patient-doctor communication with ASR and MT. ASR systems have recently displayed astounding performance on particular tasks for which enough quantities of training data are available, such as LibriSpeech. Building a good model is still difficult due to a variety of speaking styles, acoustic and recording settings, and a lack of in-domain training data. In this thesis, we describe our efforts to construct ASR systems for a conversational telephone speech recognition task in the medical domain for Vietnamese language to assist emergency room contact between doctors and patients across linguistic barriers. In order to enhance the system's performance, we investigate various training schedules and data combining strategies. We also examine how best to make use of the little data that is available. The use of publicly accessible models like XLSR-53 is compared to the use of customized pre-trained models, and both supervised and unsupervised approaches are utilized using wav2vec 2.0 as architecture.

The burgeoning computational demands for training large language models (LLMs) necessitate efficient methods, including quantized training, which leverages low-bit arithmetic operations to reduce costs. While FP8 precision has shown potential, leveraging FP4 remains challenging due to inherent quantization errors and limited representation capability. Based on the Transformer architecture, we present an FP4 training scheme for LLMs, overcoming these obstacles through mixed-precision quantization strategies tailed for different modules and training stages. This allows us to apply the precision level suitable to distinct components within the model, ensuring that multi-head attention and linear layers are handled appropriately. Our pretraining recipe ensures stability in backpropagation by incorporating fine-grained quantization methods with a target precision training schedule. Experimental results demonstrate that our FP4 training scheme achieves accuracy comparable to BF16 and FP8, with smaller theoretical computational cost. With the advent of next-generation hardware supporting FP4, our method sets the foundation for efficient ultra-low precision training.

We present IMU-1, a 430M-parameter language model trained on 72B tokens that approaches the benchmark performance of models trained on 56x more data. We describe a validated training recipe combining recent architectural interventions (QK-norm attention, per-head gating, value residuals, LayerNorm scaling) with optimization advances (NorMuon with cautious weight decay, muP parametrization) and a three-stage training schedule with post-hoc checkpoint EMA. We provide ablations for each component and release code, weights and data to enable reproduction: https://huggingface.co/thepowerfuldeez/imu1_base

The paradigm of large-scale pre-training followed by downstream fine-tuning has been widely employed in various object detection algorithms. In this paper, we reveal discrepancies in data, model, and task between the pre-training and fine-tuning procedure in existing practices, which implicitly limit the detector's performance, generalization ability, and convergence speed. To this end, we propose AlignDet, a unified pre-training framework that can be adapted to various existing detectors to alleviate the discrepancies. AlignDet decouples the pre-training process into two stages, i.e., image-domain and box-domain pre-training. The image-domain pre-training optimizes the detection backbone to capture holistic visual abstraction, and box-domain pre-training learns instance-level semantics and task-aware concepts to initialize the parts out of the backbone. By incorporating the self-supervised pre-trained backbones, we can pre-train all modules for various detectors in an unsupervised paradigm. As depicted in Figure 1, extensive experiments demonstrate that AlignDet can achieve significant improvements across diverse protocols, such as detection algorithm, model backbone, data setting, and training schedule. For example, AlignDet improves FCOS by 5.3 mAP, RetinaNet by 2.1 mAP, Faster R-CNN by 3.3 mAP, and DETR by 2.3 mAP under fewer epochs.

Recent works have explored the use of weight sparsity to improve the training efficiency (test accuracy w.r.t training FLOPs) of deep neural networks (DNNs). These works aim to reduce training FLOPs but training with sparse weights often leads to accuracy loss or requires longer training schedules, making the resulting training efficiency less clear. In contrast, we focus on using sparsity to increase accuracy while using the same FLOPs as the dense model and show training efficiency gains through higher accuracy. In this work, we introduce Sparse-IFT, a family of Sparse Iso-FLOP Transformations which are used as drop-in replacements for dense layers to improve their representational capacity and FLOP efficiency. Each transformation is parameterized by a single hyperparameter (sparsity level) and provides a larger search space to find optimal sparse masks. Without changing any training hyperparameters, replacing dense layers with Sparse-IFT leads to significant improvements across computer vision (CV) and natural language processing (NLP) tasks, including ResNet-18 on ImageNet (+3.5%) and GPT-3 Small on WikiText-103 (-0.4 PPL), both matching larger dense model variants that use 2x or more FLOPs. To our knowledge, this is the first work to demonstrate the use of sparsity for improving the accuracy of dense models via a simple-to-use set of sparse transformations. Code is available at: https://github.com/CerebrasResearch/Sparse-IFT.

Recently, bound propagation based certified robust training methods have been proposed for training neural networks with certifiable robustness guarantees. Despite that state-of-the-art (SOTA) methods including interval bound propagation (IBP) and CROWN-IBP have per-batch training complexity similar to standard neural network training, they usually use a long warmup schedule with hundreds or thousands epochs to reach SOTA performance and are thus still costly. In this paper, we identify two important issues in existing methods, namely exploded bounds at initialization, and the imbalance in ReLU activation states and improve IBP training. These two issues make certified training difficult and unstable, and thereby long warmup schedules were needed in prior works. To mitigate these issues and conduct faster certified training with shorter warmup, we propose three improvements based on IBP training: 1) We derive a new weight initialization method for IBP training; 2) We propose to fully add Batch Normalization (BN) to each layer in the model, since we find BN can reduce the imbalance in ReLU activation states; 3) We also design regularization to explicitly tighten certified bounds and balance ReLU activation states during wamrup. We are able to obtain 65.03% verified error on CIFAR-10 (epsilon=8{255}) and 82.36% verified error on TinyImageNet (epsilon=1{255}) using very short training schedules (160 and 80 total epochs, respectively), outperforming literature SOTA trained with hundreds or thousands epochs under the same network architecture. The code is available at https://github.com/shizhouxing/Fast-Certified-Robust-Training.

Recent work has shown that self-supervised pre-training leads to improvements over supervised learning on challenging visual recognition tasks. CLIP, an exciting new approach to learning with language supervision, demonstrates promising performance on a wide variety of benchmarks. In this work, we explore whether self-supervised learning can aid in the use of language supervision for visual representation learning. We introduce SLIP, a multi-task learning framework for combining self-supervised learning and CLIP pre-training. After pre-training with Vision Transformers, we thoroughly evaluate representation quality and compare performance to both CLIP and self-supervised learning under three distinct settings: zero-shot transfer, linear classification, and end-to-end finetuning. Across ImageNet and a battery of additional datasets, we find that SLIP improves accuracy by a large margin. We validate our results further with experiments on different model sizes, training schedules, and pre-training datasets. Our findings show that SLIP enjoys the best of both worlds: better performance than self-supervision (+8.1% linear accuracy) and language supervision (+5.2% zero-shot accuracy).

Training strategy, namely whether to retrain from scratch or fine-tune from the previous checkpoint, is an overlooked decision variable in active learning. We show that this choice has exploitable structure: retraining is most useful in early rounds, when each batch can substantially reshape the labeled distribution, while fine-tuning becomes safer once the model trajectory stabilizes. We propose HybridAL, an adaptive training schedule that monitors an online stabilization signal and switches from retraining to fine-tuning after sustained stabilization. Two complementary signals, spectral exponent change Δα (weight-based) and accuracy change ΔAcc (validation-based), span different points on the time-calibration trade-off. Across three encoder backbones and six text-classification tasks (five seeds each), HybridAL keeps endpoint macro-F1 non-inferior to retraining and fine-tuning at a 0.010 margin, saves up to 49% of retraining time, and recovers a substantial fraction of retraining's calibration advantage as measured by negative log-likelihood (NLL). Compared with schedules that switch at a pre-committed round, HybridAL obtains lower NLL at moderate additional cost, showing that trajectory-dependent switching provides a stronger time-calibration trade-off than fixed early switching.

Recent advances in reinforcement learning (RL)-based post-training have led to notable improvements in large language models (LLMs), particularly in enhancing their reasoning capabilities to handle complex tasks. However, most existing methods treat the training data as a unified whole, overlooking the fact that modern LLM training often involves a mixture of data from diverse distributions-varying in both source and difficulty. This heterogeneity introduces a key challenge: how to adaptively schedule training across distributions to optimize learning efficiency. In this paper, we present a principled curriculum learning framework grounded in the notion of distribution-level learnability. Our core insight is that the magnitude of policy advantages reflects how much a model can still benefit from further training on a given distribution. Based on this, we propose a distribution-level curriculum learning framework for RL-based LLM post-training, which leverages the Upper Confidence Bound (UCB) principle to dynamically adjust sampling probabilities for different distrubutions. This approach prioritizes distributions with either high average advantage (exploitation) or low sample count (exploration), yielding an adaptive and theoretically grounded training schedule. We instantiate our curriculum learning framework with GRPO as the underlying RL algorithm and demonstrate its effectiveness on logic reasoning datasets with multiple difficulties and sources. Our experiments show that our framework significantly improves convergence speed and final performance, highlighting the value of distribution-aware curriculum strategies in LLM post-training. Code: https://github.com/ZhentingWang/DUMP.

The DEtection TRansformer (DETR) is a powerful end-to-end object detector, yet its one-to-one matching strategy suffers from slow convergence and low recall. A common approach to address this issue is to use one-to-many label assignment to provide more positive samples. However, existing methods that use one-to-many matching as an auxiliary objective lead to increased training costs, with their auxiliary decoders discarded during inference. To address this limitation, we propose MDS-DETR, which leverages both one-to-one and one-to-many supervision within a single decoder. Specifically, we introduce a Masked Duplicate Suppressor (MDS) that injects asymmetry into self-attention via confidence-based causal masking. MDS filters out the duplicates generated by the one-to-many supervised layer, enables explainable, duplicate-free predictions in a fully end-to-end framework. MDS-DETR outperforms existing one-to-many DETR variants such as MS-DETR, MR.DETR and Relation-DETR, without relying on any additional queries or auxiliary decoders. Under a 12-epoch training schedule on MS COCO with a ResNet-50 backbone, MDS-DETR achieves a +2.8 mAP improvement over Deformable-DETR with only a 5\% increase in training time, and outperforms the state-of-the-art MR.DETR by +0.3 mAP while being even 20\% faster in training. Our code and models are available at https://github.com/dcholee/mds-detr{https://github.com/DChoLee/MDS-DETR}.

Prototype-based neural networks aim to provide intrinsic interpretability by grounding predictions in a small set of part prototypes. However, modern vision backbones typically operate in normalized, directional embedding spaces where each semantic part exhibits substantial intra-class variability. As a result, point prototypes often become redundant or unstable, hurting both explanation quality and robustness. We propose vMFProto, a distributional part-prototype framework that models each class as a mixture of von Mises-Fisher components on the hypersphere. Each prototype learns its own concentration, capturing part-specific variability, and we use entropic optimal transport (OT) to obtain structured patch-to-prototype assignments. A two-stage training schedule performs OT-driven prototype discovery followed by end-to-end refinement with patch-level distillation and distribution-aware diversity regularization. Experiments with frozen DINO backbones show that vMFProto achieves leading consistency and distinctiveness on CUB-200-2011 and competitive classification accuracy across CUB, Stanford Dogs, and Stanford Cars. Qualitative results confirm that vMFProto yields localized, non-redundant part evidence.

How to enable robots to predict the outcomes of their own motion intentions in three-dimensional space has been a fundamental problem in embodied intelligence. To explore more general spatial imagination capabilities, here we present AirScape, the first world model designed for six-degree-of-freedom aerial agents. AirScape predicts future observation sequences based on current visual inputs and motion intentions. Specifically, we construct an dataset for aerial world model training and testing, which consists of 11k video-intention pairs. This dataset includes first-person-view videos capturing diverse drone actions across a wide range of scenarios, with over 1,000 hours spent annotating the corresponding motion intentions. Then we develop a two-phase training schedule to train a foundation model -- initially devoid of embodied spatial knowledge -- into a world model that is controllable by motion intentions and adheres to physical spatio-temporal constraints.

Pre-trained diffusion models provide rich multi-scale latent features and are emerging as powerful vision backbones. While recent works such as Marigold~ke2024repurposing and Lotus~he2024lotus adapt diffusion priors for dense prediction with strong cross-domain generalization, their potential for structured outputs (e.g., human pose estimation) remains underexplored. In this paper, we propose SDPose, a fine-tuning framework built upon Stable Diffusion to fully exploit pre-trained diffusion priors for human pose estimation. First, rather than modifying cross-attention modules or introducing learnable embeddings, we directly predict keypoint heatmaps in the SD U-Net's image latent space to preserve the original generative priors. Second, we map these latent features into keypoint heatmaps through a lightweight convolutional pose head, which avoids disrupting the pre-trained backbone. Finally, to prevent overfitting and enhance out-of-distribution robustness, we incorporate an auxiliary RGB reconstruction branch that preserves domain-transferable generative semantics. To evaluate robustness under domain shift, we further construct COCO-OOD, a style-transferred variant of COCO with preserved annotations. With just one-fifth of the training schedule used by Sapiens on COCO, SDPose attains parity with Sapiens-1B/2B on the COCO validation set and establishes a new state of the art on the cross-domain benchmarks HumanArt and COCO-OOD. Furthermore, we showcase SDPose as a zero-shot pose annotator for downstream controllable generation tasks, including ControlNet-based image synthesis and video generation, where it delivers qualitatively superior pose guidance.

Previous work mainly focuses on improving cross-lingual transfer for NLU tasks with a multilingual pretrained encoder (MPE), or improving the performance on supervised machine translation with BERT. However, it is under-explored that whether the MPE can help to facilitate the cross-lingual transferability of NMT model. In this paper, we focus on a zero-shot cross-lingual transfer task in NMT. In this task, the NMT model is trained with parallel dataset of only one language pair and an off-the-shelf MPE, then it is directly tested on zero-shot language pairs. We propose SixT, a simple yet effective model for this task. SixT leverages the MPE with a two-stage training schedule and gets further improvement with a position disentangled encoder and a capacity-enhanced decoder. Using this method, SixT significantly outperforms mBART, a pretrained multilingual encoder-decoder model explicitly designed for NMT, with an average improvement of 7.1 BLEU on zero-shot any-to-English test sets across 14 source languages. Furthermore, with much less training computation cost and training data, our model achieves better performance on 15 any-to-English test sets than CRISS and m2m-100, two strong multilingual NMT baselines.

Joint clustering and feature learning methods have shown remarkable performance in unsupervised representation learning. However, the training schedule alternating between feature clustering and network parameters update leads to unstable learning of visual representations. To overcome this challenge, we propose Online Deep Clustering (ODC) that performs clustering and network update simultaneously rather than alternatingly. Our key insight is that the cluster centroids should evolve steadily in keeping the classifier stably updated. Specifically, we design and maintain two dynamic memory modules, i.e., samples memory to store samples labels and features, and centroids memory for centroids evolution. We break down the abrupt global clustering into steady memory update and batch-wise label re-assignment. The process is integrated into network update iterations. In this way, labels and the network evolve shoulder-to-shoulder rather than alternatingly. Extensive experiments demonstrate that ODC stabilizes the training process and boosts the performance effectively. Code: https://github.com/open-mmlab/OpenSelfSup.

We present Nanbeige4-3B, a family of small-scale but high-performing language models. Pretrained on 23T high-quality tokens and finetuned on over 30 million diverse instructions, we extend the boundary of the scaling law for small language models. In pre-training, we design a Fine-Grained Warmup-Stable-Decay (FG-WSD) training scheduler, which progressively refines data mixtures across stages to boost model performance. In post-training, to improve the quality of the SFT data, we design a joint mechanism that integrates deliberative generation refinement and chain-of-thought reconstruction, yielding substantial gains on complex tasks. Following SFT, we employ our flagship reasoning model to distill Nanbeige4-3B through our proposed Dual Preference Distillation (DPD) method, which leads to further performance gains. Finally, a multi-stage reinforcement learning phase was applied, leveraging verifiable rewards and preference modeling to strengthen abilities on both reasoning and human alignment. Extensive evaluations show that Nanbeige4-3B not only significantly outperforms models of comparable parameter scale but also rivals much larger models across a wide range of benchmarks. The model checkpoints are available at https://huggingface.co/Nanbeige.

Diffusion models are the de facto approach for generating high-quality images and videos, but learning high-dimensional models remains a formidable task due to computational and optimization challenges. Existing methods often resort to training cascaded models in pixel space or using a downsampled latent space of a separately trained auto-encoder. In this paper, we introduce Matryoshka Diffusion Models(MDM), an end-to-end framework for high-resolution image and video synthesis. We propose a diffusion process that denoises inputs at multiple resolutions jointly and uses a NestedUNet architecture where features and parameters for small-scale inputs are nested within those of large scales. In addition, MDM enables a progressive training schedule from lower to higher resolutions, which leads to significant improvements in optimization for high-resolution generation. We demonstrate the effectiveness of our approach on various benchmarks, including class-conditioned image generation, high-resolution text-to-image, and text-to-video applications. Remarkably, we can train a single pixel-space model at resolutions of up to 1024x1024 pixels, demonstrating strong zero-shot generalization using the CC12M dataset, which contains only 12 million images.

Natural Language Video Grounding (NLVG) aims to localize time segments in an untrimmed video according to sentence queries. In this work, we present a new paradigm named Explore-And-Match for NLVG that seamlessly unifies the strengths of two streams of NLVG methods: proposal-free and proposal-based; the former explores the search space to find time segments directly, and the latter matches the predefined time segments with ground truths. To achieve this, we formulate NLVG as a set prediction problem and design an end-to-end trainable Language Video Transformer (LVTR) that can enjoy two favorable properties, which are rich contextualization power and parallel decoding. We train LVTR with two losses. First, temporal localization loss allows time segments of all queries to regress targets (explore). Second, set guidance loss couples every query with their respective target (match). To our surprise, we found that training schedule shows divide-and-conquer-like pattern: time segments are first diversified regardless of the target, then coupled with each target, and fine-tuned to the target again. Moreover, LVTR is highly efficient and effective: it infers faster than previous baselines (by 2X or more) and sets competitive results on two NLVG benchmarks (ActivityCaptions and Charades-STA). Codes are available at https://github.com/sangminwoo/Explore-And-Match.

We propose a new setting for detecting unseen objects called Zero-shot Annotation object Detection (ZAD). It expands the zero-shot object detection setting by allowing the novel objects to exist in the training images and restricts the additional information the detector uses to novel category names. Recently, to detect unseen objects, large-scale vision-language models (e.g., CLIP) are leveraged by different methods. The distillation-based methods have good overall performance but suffer from a long training schedule caused by two factors. First, existing work creates distillation regions biased to the base categories, which limits the distillation of novel category information. Second, directly using the raw feature from CLIP for distillation neglects the domain gap between the training data of CLIP and the detection datasets, which makes it difficult to learn the mapping from the image region to the vision-language feature space. To solve these problems, we propose Efficient feature distillation for Zero-shot Annotation object Detection (EZAD). Firstly, EZAD adapts the CLIP's feature space to the target detection domain by re-normalizing CLIP; Secondly, EZAD uses CLIP to generate distillation proposals with potential novel category names to avoid the distillation being overly biased toward the base categories. Finally, EZAD takes advantage of semantic meaning for regression to further improve the model performance. As a result, EZAD outperforms the previous distillation-based methods in COCO by 4% with a much shorter training schedule and achieves a 3% improvement on the LVIS dataset. Our code is available at https://github.com/dragonlzm/EZAD

Rapid extraction of structured information from social media is important for humanitarian response, yet existing disaster tweet resources mainly provide document-level category labels without span-level entity annotations. We introduce HUMAID-NER, the first named entity recognition dataset built on the HumAID benchmark, containing 60,000 English disaster tweets annotated in BIO format across ten operationally motivated entity types and yielding approximately 175,000 labelled entity spans. Annotations are generated through a reproducible three-stage hybrid pipeline combining a spaCy transformer model, disaster-domain EntityRuler patterns, and structured regular expressions with priority-based overlap resolution. We also propose a joint multitask learning framework that performs disaster-specific named entity recognition and humanitarian event classification using a shared RoBERTa-large encoder. To reduce task conflict during joint training, the model uses homoscedastic uncertainty weighting with learnable task parameters and a two-stage training schedule that freezes the lower 18 of 24 encoder layers in the second stage. On the HUMAID-NER validation set, the proposed system achieves NER span micro-F1 of 0.841 and classification macro-F1 of 0.761 simultaneously. A real-time web dashboard demonstrates end-to-end deployment. The dataset, models, and pipeline code are released to support reproducibility and future crisis informatics research.

We introduce Breadth-First Pipeline Parallelism, a novel training schedule which optimizes the combination of pipeline and data parallelism. Breadth-First Pipeline Parallelism lowers training time, cost and memory usage by combining a high GPU utilization with a small batch size per GPU, and by making use of fully sharded data parallelism. Experimentally, we observed an increase of up to 43% in training throughput for a 52 billion-parameter model using a small batch size per GPU compared to Megatron-LM, which would reduce the training time and cost by the same amount on a large GPU cluster.

Neural networks are known to produce poor uncertainty estimations, and a variety of approaches have been proposed to remedy this issue. This includes deep ensemble, a simple and effective method that achieves state-of-the-art results for uncertainty-aware learning tasks. In this work, we explore a combinatorial generalization of deep ensemble called deep combinatorial aggregation (DCA). DCA creates multiple instances of network components and aggregates their combinations to produce diversified model proposals and predictions. DCA components can be defined at different levels of granularity. And we discovered that coarse-grain DCAs can outperform deep ensemble for uncertainty-aware learning both in terms of predictive performance and uncertainty estimation. For fine-grain DCAs, we discover that an average parameterization approach named deep combinatorial weight averaging (DCWA) can improve the baseline training. It is on par with stochastic weight averaging (SWA) but does not require any custom training schedule or adaptation of BatchNorm layers. Furthermore, we propose a consistency enforcing loss that helps the training of DCWA and modelwise DCA. We experiment on in-domain, distributional shift, and out-of-distribution image classification tasks, and empirically confirm the effectiveness of DCWA and DCA approaches.

Recent advancements in discrete image generation showed that scaling the VQ codebook size significantly improves reconstruction fidelity. However, training generative models with a large VQ codebook remains challenging, typically requiring larger model size and a longer training schedule. In this work, we propose Stochastic Neighbor Cross Entropy Minimization (SNCE), a novel training objective designed to address the optimization challenges of large-codebook discrete image generators. Instead of supervising the model with a hard one-hot target, SNCE constructs a soft categorical distribution over a set of neighboring tokens. The probability assigned to each token is proportional to the proximity between its code embedding and the ground-truth image embedding, encouraging the model to capture semantically meaningful geometric structure in the quantized embedding space. We conduct extensive experiments across class-conditional ImageNet-256 generation, large-scale text-to-image synthesis, and image editing tasks. Results show that SNCE significantly improves convergence speed and overall generation quality compared to standard cross-entropy objectives.

We present Sparse R-CNN, a purely sparse method for object detection in images. Existing works on object detection heavily rely on dense object candidates, such as k anchor boxes pre-defined on all grids of image feature map of size Htimes W. In our method, however, a fixed sparse set of learned object proposals, total length of N, are provided to object recognition head to perform classification and location. By eliminating HWk (up to hundreds of thousands) hand-designed object candidates to N (e.g. 100) learnable proposals, Sparse R-CNN completely avoids all efforts related to object candidates design and many-to-one label assignment. More importantly, final predictions are directly output without non-maximum suppression post-procedure. Sparse R-CNN demonstrates accuracy, run-time and training convergence performance on par with the well-established detector baselines on the challenging COCO dataset, e.g., achieving 45.0 AP in standard 3times training schedule and running at 22 fps using ResNet-50 FPN model. We hope our work could inspire re-thinking the convention of dense prior in object detectors. The code is available at: https://github.com/PeizeSun/SparseR-CNN.

Catastrophic forgetting has remained a critical challenge for deep neural networks in Continual Learning (CL) as it undermines consolidated knowledge when learning new tasks. Parameter efficient fine tuning CL techniques are gaining traction for their effectiveness in addressing catastrophic forgetting with a lightweight training schedule while avoiding degradation of consolidated knowledge in pre-trained models. However, low rank adapters (LoRA) in these approaches are highly sensitive to rank selection which can lead to sub-optimal resource allocation and performance. To this end, we introduce PEARL, a rehearsal-free CL framework that entails dynamic rank allocation for LoRA components during CL training. Specifically, PEARL leverages reference task weights and adaptively determines the rank of task-specific LoRA components based on the current tasks' proximity to reference task weights in parameter space. To demonstrate the versatility of PEARL, we evaluate it across three vision architectures (ResNet, Separable Convolutional Network and Vision Transformer) and a multitude of CL scenarios, and show that PEARL outperforms all considered baselines by a large margin.

Large language models often underperform in many European languages due to the dominance of English and a few high-resource languages in training data. This paper presents TildeOpen LLM, a 30-billion-parameter open-weight foundational model trained for 34 European languages to promote linguistic equity and improve performance for low-resource languages. To address the data imbalance, we combine dataset upsampling with a curriculum-based training schedule that alternates between uniform and natural language distributions. The resulting model performs favorably compared to other multilingual LLMs despite being trained with significantly fewer computing resources. Evaluation across multiple multilingual benchmarks shows that TildeOpen surpasses existing open-weight models in text generation and comprehension, particularly for Baltic, Finno-Ugric, and Slavic languages. Human evaluations confirm an up to tenfold reduction in linguistic errors relative to leading baselines. The model and associated resources are fully open-weight and publicly available at huggingface.co/TildeAI/TildeOpen-30b. These outcomes demonstrate that careful data curation and balanced training strategies can substantially enhance multilingual model quality without increasing model size or training volume.

Detecting and delineating tiny targets in 3D brain scans is a central yet under-addressed challenge in medical imaging.In ischemic stroke, for instance, the culprit thrombus is small, low-contrast, and variably expressed across modalities(e.g., susceptibility-weighted T2 blooming, diffusion restriction on DWI/ADC), while real-world multi-center dataintroduce domain shifts, anisotropy, and frequent missing sequences. We introduce a methodology that couples an attention-based recurrent segmentation network (UpAttLLSTM), a training schedule that progressively increases the difficulty of hetero-modal learning, with gradual modality dropout, UpAttLLSTM aggregates context across slices via recurrent units (2.5D) and uses attention gates to fuse complementary cues across available sequences, making it robust to anisotropy and class imbalance. Gradual modality dropout systematically simulates site heterogeneity,noise, and missing modalities during training, acting as both augmentation and regularization to improve multi-center generalization. On a monocentric cohort, our approach detects thrombi in >90% of cases with a Dice score of 0.65. In a multi-center setting with missing modalities, it achieves-80% detection with a Dice score around 0.35. Beyond stroke, the proposed methodology directly transfers to other small-lesion tasks in 3D medical imaging where targets are scarce, subtle, and modality-dependent

We present an update to ECMWF's machine-learned weather forecasting model AIFS Single with several key improvements. The model now incorporates physical consistency constraints through bounding layers, an updated training schedule, and an expanded set of variables. The physical constraints substantially improve precipitation forecasts and the new variables show a high level of skill. Upper-air headline scores also show improvement over the previous AIFS version. The AIFS has been fully operational at ECMWF since the 25th of February 2025.

Do deep learning models for instance segmentation generalize to novel objects in a systematic way? For classification, such behavior has been questioned. In this study, we aim to understand if certain design decisions such as framework, architecture or pre-training contribute to the semantic understanding of instance segmentation. To answer this question, we consider a special case of robustness and compare pre-trained models on a challenging benchmark for object-centric, out-of-distribution texture. We do not introduce another method in this work. Instead, we take a step back and evaluate a broad range of existing literature. This includes Cascade and Mask R-CNN, Swin Transformer, BMask, YOLACT(++), DETR, BCNet, SOTR and SOLOv2. We find that YOLACT++, SOTR and SOLOv2 are significantly more robust to out-of-distribution texture than other frameworks. In addition, we show that deeper and dynamic architectures improve robustness whereas training schedules, data augmentation and pre-training have only a minor impact. In summary we evaluate 68 models on 61 versions of MS COCO for a total of 4148 evaluations.

Directly learning from examples of random difficulty levels is often challenging for both humans and machine learning models. A more effective strategy involves exposing learners to examples in a progressive order, from easy to difficult. Curriculum Learning (CL) has been proposed to implement this strategy in machine learning model training. However, two key challenges persist in CL framework design: defining the difficulty of training data and determining the appropriate amount of data to input at each training step. This paper presents a Psychology-based Unified Dynamic Framework for Curriculum Learning (PUDF), drawing inspiration from psychometrics. We quantify the difficulty of training data by applying Item Response Theory (IRT) to responses from Artificial Crowds (AC). This theory-driven IRT-AC approach leads to global (i.e., model-independent) and interpretable difficulty values. Leveraging IRT, we propose a Dynamic Data Selection via Model Ability Estimation (DDS-MAE) strategy to schedule the appropriate amount of data during model training. Since our difficulty labeling and model ability estimation are based on a consistent theory, namely IRT, their values are comparable within the same scope, potentially leading to a faster convergence compared to the other CL methods. Experimental results demonstrate that fine-tuning pre-trained language models with PUDF enhances their performance on the GLUE benchmark. Moreover, PUDF surpasses other state-of-the-art (SOTA) CL methods on the GLUE benchmark. We further explore the components of PUDF, namely the difficulty measurer (IRT-AC) and the training scheduler (DDS-MAE) qualitatively and quantitatively. Lastly, we conduct an ablation study to clarify which components of PUDF contribute to faster convergence and higher accuracy.

Automated segmentation of Pancreatic Ductal Adenocarcinoma (PDAC) from MRI is critical for clinical workflows but is hindered by poor tumor-tissue contrast and a scarcity of annotated data. This paper details our submission to the PANTHER challenge, addressing both diagnostic T1-weighted (Task 1) and therapeutic T2-weighted (Task 2) segmentation. Our approach is built upon the nnU-Net framework and leverages a deep, multi-stage cascaded pre-training strategy, starting from a general anatomical foundation model and sequentially fine-tuning on CT pancreatic lesion datasets and the target MRI modalities. Through extensive five-fold cross-validation, we systematically evaluated data augmentation schemes and training schedules. Our analysis revealed a critical trade-off, where aggressive data augmentation produced the highest volumetric accuracy, while default augmentations yielded superior boundary precision (achieving a state-of-the-art MASD of 5.46 mm and HD95 of 17.33 mm for Task 1). For our final submission, we exploited this finding by constructing custom, heterogeneous ensembles of specialist models, essentially creating a mix of experts. This metric-aware ensembling strategy proved highly effective, achieving a top cross-validation Tumor Dice score of 0.661 for Task 1 and 0.523 for Task 2. Our work presents a robust methodology for developing specialized, high-performance models in the context of limited data and complex medical imaging tasks (Team MIC-DKFZ).

In this paper, we present an integral pre-training framework based on masked image modeling (MIM). We advocate for pre-training the backbone and neck jointly so that the transfer gap between MIM and downstream recognition tasks is minimal. We make two technical contributions. First, we unify the reconstruction and recognition necks by inserting a feature pyramid into the pre-training stage. Second, we complement mask image modeling (MIM) with masked feature modeling (MFM) that offers multi-stage supervision to the feature pyramid. The pre-trained models, termed integrally pre-trained transformer pyramid networks (iTPNs), serve as powerful foundation models for visual recognition. In particular, the base/large-level iTPN achieves an 86.2%/87.8% top-1 accuracy on ImageNet-1K, a 53.2%/55.6% box AP on COCO object detection with 1x training schedule using Mask-RCNN, and a 54.7%/57.7% mIoU on ADE20K semantic segmentation using UPerHead -- all these results set new records. Our work inspires the community to work on unifying upstream pre-training and downstream fine-tuning tasks. Code and the pre-trained models will be released at https://github.com/sunsmarterjie/iTPN.

In this paper, we propose an algorithm that allows joint refinement of camera pose and scene geometry represented by decomposed low-rank tensor, using only 2D images as supervision. First, we conduct a pilot study based on a 1D signal and relate our findings to 3D scenarios, where the naive joint pose optimization on voxel-based NeRFs can easily lead to sub-optimal solutions. Moreover, based on the analysis of the frequency spectrum, we propose to apply convolutional Gaussian filters on 2D and 3D radiance fields for a coarse-to-fine training schedule that enables joint camera pose optimization. Leveraging the decomposition property in decomposed low-rank tensor, our method achieves an equivalent effect to brute-force 3D convolution with only incurring little computational overhead. To further improve the robustness and stability of joint optimization, we also propose techniques of smoothed 2D supervision, randomly scaled kernel parameters, and edge-guided loss mask. Extensive quantitative and qualitative evaluations demonstrate that our proposed framework achieves superior performance in novel view synthesis as well as rapid convergence for optimization.

Knowledge Distillation (KD) has been validated as an effective model compression technique for learning compact object detectors. Existing state-of-the-art KD methods for object detection are mostly based on feature imitation. In this paper, we present a general and effective prediction mimicking distillation scheme, called CrossKD, which delivers the intermediate features of the student's detection head to the teacher's detection head. The resulting cross-head predictions are then forced to mimic the teacher's predictions. This manner relieves the student's head from receiving contradictory supervision signals from the annotations and the teacher's predictions, greatly improving the student's detection performance. Moreover, as mimicking the teacher's predictions is the target of KD, CrossKD offers more task-oriented information in contrast with feature imitation. On MS COCO, with only prediction mimicking losses applied, our CrossKD boosts the average precision of GFL ResNet-50 with 1x training schedule from 40.2 to 43.7, outperforming all existing KD methods. In addition, our method also works well when distilling detectors with heterogeneous backbones. Code is available at https://github.com/jbwang1997/CrossKD.

Despite the significant achievements of Vision Transformers (ViTs) in various vision tasks, they are constrained by the quadratic complexity. Recently, State Space Models (SSMs) have garnered widespread attention due to their global receptive field and linear complexity with respect to the input length, demonstrating substantial potential across fields including natural language processing and computer vision. To improve the performance of SSMs in vision tasks, a multi-scan strategy is widely adopted, which leads to significant redundancy of SSMs. For a better trade-off between efficiency and performance, we analyze the underlying reasons behind the success of the multi-scan strategy, where long-range dependency plays an important role. Based on the analysis, we introduce Multi-Scale Vision Mamba (MSVMamba) to preserve the superiority of SSMs in vision tasks with limited parameters. It employs a multi-scale 2D scanning technique on both original and downsampled feature maps, which not only benefits long-range dependency learning but also reduces computational costs. Additionally, we integrate a Convolutional Feed-Forward Network (ConvFFN) to address the lack of channel mixing. Our experiments demonstrate that MSVMamba is highly competitive, with the MSVMamba-Tiny model achieving 82.8% top-1 accuracy on ImageNet, 46.9% box mAP, and 42.2% instance mAP with the Mask R-CNN framework, 1x training schedule on COCO, and 47.6% mIoU with single-scale testing on ADE20K.Code is available at https://github.com/YuHengsss/MSVMamba.

We introduce Skywork UniPic, a 1.5 billion-parameter autoregressive model that unifies image understanding, text-to-image generation, and image editing within a single architecture-eliminating the need for task-specific adapters or inter-module connectors-and demonstrate that compact multimodal systems can achieve state-of-the-art performance on commodity hardware. Skywork UniPic achieves a GenEval score of 0.86, surpassing most existing unified models; sets a new DPG-Bench complex-generation record of 85.5; attains 5.83 on GEditBench-EN and 3.49 on ImgEdit-Bench for image editing; and generates 1024 x 1024 images with under 15 GB of GPU memory (e.g., RTX 4090). (1) a decoupled encoding strategy that leverages a masked autoregressive encoder for synthesis and a SigLIP2 encoder for understanding, all feeding a shared autoregressive decoder; (2) a progressive, resolution-aware training schedule scaling from 256 x 256 to 1024 x 1024 while dynamically unfreezing parameters to balance capacity and stability; and (3) meticulously curated, 100 million-scale datasets augmented with task-specific reward models to refine generation and editing objectives. By demonstrating that high-fidelity multimodal integration need not incur prohibitive resource demands, Skywork UniPic establishes a practical paradigm for deployable, high-fidelity multimodal AI. Code and weights are publicly available at https://huggingface.co/Skywork/Skywork-UniPic-1.5B.

Deep learning algorithms can fare poorly when the training dataset suffers from heavy class-imbalance but the testing criterion requires good generalization on less frequent classes. We design two novel methods to improve performance in such scenarios. First, we propose a theoretically-principled label-distribution-aware margin (LDAM) loss motivated by minimizing a margin-based generalization bound. This loss replaces the standard cross-entropy objective during training and can be applied with prior strategies for training with class-imbalance such as re-weighting or re-sampling. Second, we propose a simple, yet effective, training schedule that defers re-weighting until after the initial stage, allowing the model to learn an initial representation while avoiding some of the complications associated with re-weighting or re-sampling. We test our methods on several benchmark vision tasks including the real-world imbalanced dataset iNaturalist 2018. Our experiments show that either of these methods alone can already improve over existing techniques and their combination achieves even better performance gains.

Training a unified model integrating video-to-audio (V2A), text-to-audio (T2A), and joint video-text-to-audio (VT2A) generation offers significant application flexibility, yet faces two unexplored foundational challenges: (1) the scarcity of high-quality audio captions with tight A-V-T alignment, leading to severe semantic conflict between multimodal conditions, and (2) cross-task and intra-task competition, manifesting as an adverse V2A-T2A performance trade-off and modality bias in the VT2A task. First, to address data scarcity, we introduce SoundAtlas, a large-scale dataset (470k pairs) that significantly outperforms existing benchmarks and even human experts in quality. Powered by a novel agentic pipeline, it integrates Vision-to-Language Compression to mitigate visual bias of MLLMs, a Junior-Senior Agent Handoff for a 5 times cost reduction, and rigorous Post-hoc Filtering to ensure fidelity. Consequently, SoundAtlas delivers semantically rich and temporally detailed captions with tight V-A-T alignment. Second, we propose Omni2Sound, a unified VT2A diffusion model supporting flexible input modalities. To resolve the inherent cross-task and intra-task competition, we design a three-stage multi-task progressive training schedule that converts cross-task competition into joint optimization and mitigates modality bias in the VT2A task, maintaining both audio-visual alignment and off-screen audio generation faithfulness. Finally, we construct VGGSound-Omni, a comprehensive benchmark for unified evaluation, including challenging off-screen tracks. With a standard DiT backbone, Omni2Sound achieves unified SOTA performance across all three tasks within a single model, demonstrating strong generalization across benchmarks with heterogeneous input conditions. The project page is at https://swapforward.github.io/Omni2Sound.

Most unified large multimodal models (LMMs) that support both visual understanding and image generation still rely on curated post-training supervision, such as human annotations, preference labels, or external reward models. We ask whether a unified LMM can improve both abilities autonomously using only unlabeled images. We propose a self-evolving training framework with three internal roles: a Proposer that generates visual questions, a Solver that answers and evaluates them, and a Generator that synthesizes images. Training uses only self-derived consistency signals, without human annotations, preference labels, or task-trained external reward/judge models. To stabilize learning, we introduce Solver Token Entropy (STE), a continuous difficulty signal based on token-level prediction uncertainty that remains useful even when sample-level consistency becomes unreliable. For image generation, we design a multi-scale internal evaluation scheme that combines question-answer fidelity scoring with cycle-consistent captioning. This creates a solver-mediated coupling, where better visual understanding enables more reliable generation assessment and stronger internal training signals. The framework preserves the same role decomposition, reward logic, and training schedule across diffusion-based BLIP3o, rectified-flow BAGEL, and autoregressive VARGPT-v1.1 architectures, requiring only each backbone's native prompting and generation interface. Across eight understanding metrics, our method consistently improves over the corresponding base models. On BAGEL, it achieves a +3.5% absolute gain on MMMU and improves GenEval image generation performance from 82% to 85%. Code and models are publicly released.

Text-to-audio-video (T2AV) generation models produce a video and its soundtrack from a textual description, but offer no control over whose voice speaks in the output. We show that a base T2AV model can be turned into a voice-cloning model by adding a single zero-initialized linear layer on top of its audio backbone, fine-tuning for a comparatively short training schedule, and conditioning on a short reference recording at inference time. The reference is injected through two complementary signals: its diffusion latents are prepended to the audio stream, and a global speaker embedding modulates token of the target audio. On a benchmark of 674 speaker-text pairs spanning 30 speakers we compare against five strong voice-cloning text-to-speech baselines: our enhanced 5B model attains the highest speaker-encoder cosine similarity (SECS) across three independent verification networks (ECAPA-TDNN, WavLM-SV, Resemblyzer), statistically significantly outperforming every baseline. A side product of the architecture is that the audio path can be evaluated without the video path at inference time, yielding a ~30x speed-up over the full audio-video diffusion loop while preserving the voice-cloning behaviour.

Detection Transformer (DETR) directly transforms queries to unique objects by using one-to-one bipartite matching during training and enables end-to-end object detection. Recently, these models have surpassed traditional detectors on COCO with undeniable elegance. However, they differ from traditional detectors in multiple designs, including model architecture and training schedules, and thus the effectiveness of one-to-one matching is not fully understood. In this work, we conduct a strict comparison between the one-to-one Hungarian matching in DETRs and the one-to-many label assignments in traditional detectors with non-maximum supervision (NMS). Surprisingly, we observe one-to-many assignments with NMS consistently outperform standard one-to-one matching under the same setting, with a significant gain of up to 2.5 mAP. Our detector that trains Deformable-DETR with traditional IoU-based label assignment achieved 50.2 COCO mAP within 12 epochs (1x schedule) with ResNet50 backbone, outperforming all existing traditional or transformer-based detectors in this setting. On multiple datasets, schedules, and architectures, we consistently show bipartite matching is unnecessary for performant detection transformers. Furthermore, we attribute the success of detection transformers to their expressive transformer architecture. Code is available at https://github.com/jozhang97/DETA.

Deep learning based text-to-speech (TTS) systems have been evolving rapidly with advances in model architectures, training methodologies, and generalization across speakers and languages. However, these advances have not been thoroughly investigated for Indian language speech synthesis. Such investigation is computationally expensive given the number and diversity of Indian languages, relatively lower resource availability, and the diverse set of advances in neural TTS that remain untested. In this paper, we evaluate the choice of acoustic models, vocoders, supplementary loss functions, training schedules, and speaker and language diversity for Dravidian and Indo-Aryan languages. Based on this, we identify monolingual models with FastPitch and HiFi-GAN V1, trained jointly on male and female speakers to perform the best. With this setup, we train and evaluate TTS models for 13 languages and find our models to significantly improve upon existing models in all languages as measured by mean opinion scores. We open-source all models on the Bhashini platform.

Despite the rapid integration of video perception capabilities into Large Multimodal Models (LMMs), the underlying mechanisms driving their video understanding remain poorly understood. Consequently, many design decisions in this domain are made without proper justification or analysis. The high computational cost of training and evaluating such models, coupled with limited open research, hinders the development of video-LMMs. To address this, we present a comprehensive study that helps uncover what effectively drives video understanding in LMMs. We begin by critically examining the primary contributors to the high computational requirements associated with video-LMM research and discover Scaling Consistency, wherein design and training decisions made on smaller models and datasets (up to a critical size) effectively transfer to larger models. Leveraging these insights, we explored many video-specific aspects of video-LMMs, including video sampling, architectures, data composition, training schedules, and more. For example, we demonstrated that fps sampling during training is vastly preferable to uniform frame sampling and which vision encoders are the best for video representation. Guided by these findings, we introduce Apollo, a state-of-the-art family of LMMs that achieve superior performance across different model sizes. Our models can perceive hour-long videos efficiently, with Apollo-3B outperforming most existing 7B models with an impressive 55.1 on LongVideoBench. Apollo-7B is state-of-the-art compared to 7B LMMs with a 70.9 on MLVU, and 63.3 on Video-MME.

Self-supervised learning holds the promise of eliminating the need for manual data annotation, enabling models to scale effortlessly to massive datasets and larger architectures. By not being tailored to specific tasks or domains, this training paradigm has the potential to learn visual representations from diverse sources, ranging from natural to aerial images -- using a single algorithm. This technical report introduces DINOv3, a major milestone toward realizing this vision by leveraging simple yet effective strategies. First, we leverage the benefit of scaling both dataset and model size by careful data preparation, design, and optimization. Second, we introduce a new method called Gram anchoring, which effectively addresses the known yet unsolved issue of dense feature maps degrading during long training schedules. Finally, we apply post-hoc strategies that further enhance our models' flexibility with respect to resolution, model size, and alignment with text. As a result, we present a versatile vision foundation model that outperforms the specialized state of the art across a broad range of settings, without fine-tuning. DINOv3 produces high-quality dense features that achieve outstanding performance on various vision tasks, significantly surpassing previous self- and weakly-supervised foundation models. We also share the DINOv3 suite of vision models, designed to advance the state of the art on a wide spectrum of tasks and data by providing scalable solutions for diverse resource constraints and deployment scenarios.

Membership inference attacks (MIAs) pose a critical privacy threat to fine-tuned large language models (LLMs), especially when models are adapted to domain-specific tasks using sensitive data. While prior black-box MIA techniques rely on confidence scores or token likelihoods, these signals are often entangled with a sample's intrinsic properties - such as content difficulty or rarity - leading to poor generalization and low signal-to-noise ratios. In this paper, we propose ICP-MIA, a novel MIA framework grounded in the theory of training dynamics, particularly the phenomenon of diminishing returns during optimization. We introduce the Optimization Gap as a fundamental signal of membership: at convergence, member samples exhibit minimal remaining loss-reduction potential, while non-members retain significant potential for further optimization. To estimate this gap in a black-box setting, we propose In-Context Probing (ICP), a training-free method that simulates fine-tuning-like behavior via strategically constructed input contexts. We propose two probing strategies: reference-data-based (using semantically similar public samples) and self-perturbation (via masking or generation). Experiments on three tasks and multiple LLMs show that ICP-MIA significantly outperforms prior black-box MIAs, particularly at low false positive rates. We further analyze how reference data alignment, model type, PEFT configurations, and training schedules affect attack effectiveness. Our findings establish ICP-MIA as a practical and theoretically grounded framework for auditing privacy risks in deployed LLMs.

We study the role of batch size in stochastic conditional gradient methods under a μ-Kurdyka-Łojasiewicz (μ-KL) condition. Focusing on momentum-based stochastic conditional gradient algorithms (e.g., Scion), we derive a new analysis that explicitly captures the interaction between stepsize, batch size, and stochastic noise. Our study reveals a regime-dependent behavior: increasing the batch size initially improves optimization accuracy but, beyond a critical threshold, the benefits saturate and can eventually degrade performance under a fixed token budget. Notably, the theory predicts the magnitude of the optimal stepsize and aligns well with empirical practices observed in large-scale training. Leveraging these insights, we derive principled guidelines for selecting the batch size and stepsize, and propose an adaptive strategy that increases batch size and sequence length during training while preserving convergence guarantees. Experiments on NanoGPT are consistent with the theoretical predictions and illustrate the emergence of the predicted scaling regimes. Overall, our results provide a theoretical framework for understanding batch size scaling in stochastic conditional gradient methods and offer guidance for designing efficient training schedules in large-scale optimization.

We present Sapiens2, a model family of high-resolution transformers for human-centric vision focused on generalization, versatility, and high-fidelity outputs. Our model sizes range from 0.4 to 5 billion parameters, with native 1K resolution and hierarchical variants that support 4K. Sapiens2 substantially improves over its predecessor in both pretraining and post-training. First, to learn features that capture low-level details (for dense prediction) and high-level semantics (for zero-shot or few-label settings), we combine masked image reconstruction with self-distilled contrastive objectives. Our evaluations show that this unified pretraining objective is better suited for a wider range of downstream tasks. Second, along the data axis, we pretrain on a curated dataset of 1 billion high-quality human images and improve the quality and quantity of task annotations. Third, architecturally, we incorporate advances from frontier models that enable longer training schedules with improved stability. Our 4K models adopt windowed attention to reason over longer spatial context and are pretrained with 2K output resolution. Sapiens2 sets a new state-of-the-art and improves over the first generation on pose (+4 mAP), body-part segmentation (+24.3 mIoU), normal estimation (45.6% lower angular error) and extends to new tasks such as pointmap and albedo estimation. Code: https://github.com/facebookresearch/sapiens2

Real-time vision demands models that are accurate, efficient, and simple to deploy across diverse hardware. The YOLO family has become widely deployed for this reason, yet most YOLO detectors still rely on non-maximum suppression at inference, carry heavy detection heads due to Distribution Focal Loss, require long training schedules, and can leave the smallest objects without positive label assignments. We present Ultralytics YOLO26, a unified real-time vision model family that addresses these limitations through coordinated architecture and training advances. YOLO26 uses a dual-head design for native NMS-free end-to-end inference and removes DFL entirely, yielding a lighter head with unconstrained regression range. Its training pipeline combines MuSGD, a hybrid Muon-SGD optimizer adapted from large language model training; Progressive Loss, which shifts supervision toward the inference-time head; and STAL, a label assignment strategy that guarantees positive coverage for small objects. Beyond detection, YOLO26 introduces task-specific head and loss designs for instance segmentation, pose estimation, and oriented detection, producing consistent gains across tasks and scales. The family spans five scales (n/s/m/l/x) and supports detection, instance segmentation, pose estimation, classification, and oriented detection in a single pipeline, with an open-vocabulary extension, YOLOE-26, for text-, visual-, and prompt-free inference. Across all scales, YOLO26 achieves 40.9-57.5 mAP on COCO at 1.7-11.8 ms T4 TensorRT latency, advancing the accuracy-latency Pareto front over prior real-time detectors, while YOLOE-26x reaches 40.6 AP on LVIS minival under text prompting. Code and models are available at https://github.com/ultralytics/ultralytics.

We propose a simple yet effective instance segmentation framework, termed CondInst (conditional convolutions for instance segmentation). Top-performing instance segmentation methods such as Mask R-CNN rely on ROI operations (typically ROIPool or ROIAlign) to obtain the final instance masks. In contrast, we propose to solve instance segmentation from a new perspective. Instead of using instance-wise ROIs as inputs to a network of fixed weights, we employ dynamic instance-aware networks, conditioned on instances. CondInst enjoys two advantages: 1) Instance segmentation is solved by a fully convolutional network, eliminating the need for ROI cropping and feature alignment. 2) Due to the much improved capacity of dynamically-generated conditional convolutions, the mask head can be very compact (e.g., 3 conv. layers, each having only 8 channels), leading to significantly faster inference. We demonstrate a simpler instance segmentation method that can achieve improved performance in both accuracy and inference speed. On the COCO dataset, we outperform a few recent methods including well-tuned Mask RCNN baselines, without longer training schedules needed. Code is available: https://github.com/aim-uofa/adet

Modern top-performing object detectors depend heavily on backbone networks, whose advances bring consistent performance gains through exploring more effective network structures. In this paper, we propose a novel and flexible backbone framework, namely CBNetV2, to construct high-performance detectors using existing open-sourced pre-trained backbones under the pre-training fine-tuning paradigm. In particular, CBNetV2 architecture groups multiple identical backbones, which are connected through composite connections. Specifically, it integrates the high- and low-level features of multiple backbone networks and gradually expands the receptive field to more efficiently perform object detection. We also propose a better training strategy with assistant supervision for CBNet-based detectors. Without additional pre-training of the composite backbone, CBNetV2 can be adapted to various backbones (CNN-based vs. Transformer-based) and head designs of most mainstream detectors (one-stage vs. two-stage, anchor-based vs. anchor-free-based). Experiments provide strong evidence that, compared with simply increasing the depth and width of the network, CBNetV2 introduces a more efficient, effective, and resource-friendly way to build high-performance backbone networks. Particularly, our Dual-Swin-L achieves 59.4% box AP and 51.6% mask AP on COCO test-dev under the single-model and single-scale testing protocol, which is significantly better than the state-of-the-art result (57.7% box AP and 50.2% mask AP) achieved by Swin-L, while the training schedule is reduced by 6times. With multi-scale testing, we push the current best single model result to a new record of 60.1% box AP and 52.3% mask AP without using extra training data. Code is available at https://github.com/VDIGPKU/CBNetV2.

Catastrophic overfitting (CO) in single-step adversarial training (AT) results in abrupt drops in the adversarial test accuracy (even down to 0%). For models trained with multi-step AT, it has been observed that the loss function behaves locally linearly with respect to the input, this is however lost in single-step AT. To address CO in single-step AT, several methods have been proposed to enforce local linearity of the loss via regularization. However, these regularization terms considerably slow down training due to Double Backpropagation. Instead, in this work, we introduce a regularization term, called ELLE, to mitigate CO effectively and efficiently in classical AT evaluations, as well as some more difficult regimes, e.g., large adversarial perturbations and long training schedules. Our regularization term can be theoretically linked to curvature of the loss function and is computationally cheaper than previous methods by avoiding Double Backpropagation. Our thorough experimental validation demonstrates that our work does not suffer from CO, even in challenging settings where previous works suffer from it. We also notice that adapting our regularization parameter during training (ELLE-A) greatly improves the performance, specially in large epsilon setups. Our implementation is available in https://github.com/LIONS-EPFL/ELLE .

Continual-learning agents are systems of models, harnesses, and memory operating over long multi-session horizons. Evaluating and training them requires interleaving tasks with agent-side events such as session stop and start, crons, and memory consolidation. Yet existing benchmarks and training frameworks schedule only the benchmark's own events, leaving each benchmark and agent pair to build a custom scheduling loop. We present SCLATE, an execution substrate where benchmarks and unmodified agents each add their events to one open event scheduler through an adapter. A hybrid simulated clock runs these events on a shared timeline, flowing in real time while the agent works and skipping idle gaps, which compresses a month-long scenario into hours. SCLATE also serves as a rollout engine that runs any agent's harness and memory unmodified, recording the tokens and log probabilities of every model call through an in-container proxy. We port seven benchmarks to SCLATE and compare ten unmodified harness and memory configurations head to head on ten models. The comparison shows that an added memory system does not reliably beat the harness's native memory and that models differ widely in how they use the same harness and memory. We then post-train Qwen3.5-4B through unmodified harnesses and memory systems. The model learns to use both, reading 6.8x fewer file lines with a 16.7-point higher SWE-bench Verified pass rate, and writing richer memory records, while its held-out MetaClaw accuracy rises by up to 11.8 points.

This paper introduces KLong, an open-source LLM agent trained to solve extremely long-horizon tasks. The principle is to first cold-start the model via trajectory-splitting SFT, then scale it via progressive RL training. Specifically, we first activate basic agentic abilities of a base model with a comprehensive SFT recipe. Then, we introduce Research-Factory, an automated pipeline that generates high-quality training data by collecting research papers and constructing evaluation rubrics. Using this pipeline, we build thousands of long-horizon trajectories distilled from Claude 4.5 Sonnet (Thinking). To train with these extremely long trajectories, we propose a new trajectory-splitting SFT, which preserves early context, progressively truncates later context, and maintains overlap between sub-trajectories. In addition, to further improve long-horizon task-solving capability, we propose a novel progressive RL, which schedules training into multiple stages with progressively extended timeouts. Experiments demonstrate the superiority and generalization of KLong, as shown in Figure 1. Notably, our proposed KLong (106B) surpasses Kimi K2 Thinking (1T) by 11.28% on PaperBench, and the performance improvement generalizes to other coding benchmarks like SWE-bench Verified and MLE-bench.

It is well known that many open-released foundational diffusion models have difficulty in generating images that substantially depart from average brightness, despite such images being present in the training data. This is due to an inconsistency: while denoising starts from pure Gaussian noise during inference, the training noise schedule retains residual data even in the final timestep distribution, due to difficulties in numerical conditioning in mainstream formulation, leading to unintended bias during inference. To mitigate this issue, certain epsilon-prediction models are combined with an ad-hoc offset-noise methodology. In parallel, some contemporary models have adopted zero-terminal SNR noise schedules together with v-prediction, which necessitate major alterations to pre-trained models. However, such changes risk destabilizing a large multitude of community-driven applications anchored on these pre-trained models. In light of this, our investigation revisits the fundamental causes, leading to our proposal of an innovative and principled remedy, called One More Step (OMS). By integrating a compact network and incorporating an additional simple yet effective step during inference, OMS elevates image fidelity and harmonizes the dichotomy between training and inference, while preserving original model parameters. Once trained, various pre-trained diffusion models with the same latent domain can share the same OMS module.

Self-correction is an effective technique for maintaining parallel sampling in discrete diffusion models with minimal performance degradation. Prior work has explored self-correction at inference time or during post-training; however, such approaches often suffer from limited generalization and may impair reasoning performance. GIDD pioneers pretraining-based self-correction via a multi-step BERT-style uniform-absorbing objective. However, GIDD relies on a continuous interpolation-based pipeline with opaque interactions between uniform transitions and absorbing masks, which complicates hyperparameter tuning and hinders practical performance. In this work, we propose a Self-Correcting Discrete Diffusion (SCDD) model to reformulate pretrained self-correction with explicit state transitions and learn directly in discrete time. Our framework also simplifies the training noise schedule, eliminates a redundant remasking step, and relies exclusively on uniform transitions to learn self-correction. Experiments at the GPT-2 scale demonstrate that our method enables more efficient parallel decoding while preserving generation quality.

Diffusion-based large language models (dLLMs) are gaining attention for their inherent capacity for parallel decoding, offering a compelling alternative to autoregressive LLMs. Among various decoding strategies, blockwise semi-autoregressive (semi-AR) approaches are widely adopted due to their natural support for KV caching and their favorable accuracy-speed trade-off. However, this paper identifies two fundamental limitations in the conventional semi-AR decoding approach that applies a fixed block size: i) late decoding overhead, where the unmasking of high-confidence tokens outside the current block is unnecessarily delayed, and ii) premature decoding error, where low-confidence tokens inside the current block are committed too early, leading to incorrect tokens. This paper presents the first systematic investigation challenging the fixed block size assumption in semi-AR decoding. Through a statistical analysis of confidence dynamics during the denoising process, we identify a volatility band (VB) region during dLLM decoding, which encodes local semantic structure and can be used to guide adaptive block sizing. Leveraging these insights, we introduce AdaBlock-dLLM, a training-free, plug-and-play scheduler that adaptively aligns block boundaries with semantic steps by adjusting block size during runtime. Extensive experiments across diverse benchmarks show that AdaBlock-dLLM achieves up to 5.3% accuracy improvement under the same throughput budget. Beyond inference-time optimization, we hope our semantics-aware adaptive scheduling approach and confidence-based analysis will inspire future training strategies for dLLMs.

Semantic segmentation and change detection are two fundamental challenges in remote sensing, requiring models to capture either spatial semantics or temporal differences from satellite imagery. Existing deep learning models often struggle with temporal inconsistencies or in capturing fine-grained spatial structures, require extensive pretraining, and offer limited interpretability - especially in real-world remote sensing scenarios. Recent advances in diffusion models show that Gaussian noise can be systematically leveraged to learn expressive data representations through denoising. Motivated by this, we investigate whether the noise process in diffusion models can be effectively utilized for discriminative tasks. We propose Noise2Map, a unified diffusion-based framework that repurposes the denoising process for fast, end-to-end discriminative learning. Unlike prior work that uses diffusion only for generation or feature extraction, Noise2Map directly predicts semantic or change maps using task-specific noise schedules and timestep conditioning, avoiding the costly sampling procedures of traditional diffusion models. The model is pretrained via self-supervised denoising and fine-tuned with supervision, enabling both interpretability and robustness. Our architecture supports both tasks (SS and CD) through a shared backbone and task-specific noise schedulers. Extensive evaluations on the SpaceNet7, WHU, and xView2 buildings damaged by wildfires datasets demonstrate that Noise2Map ranks on average 1st among seven models on semantic segmentation and 1st on change detection by a cross-dataset rank metric (average F1 primary, IoU tie-break). Ablation studies highlight the robustness of our model against different training noise schedulers and timestep control in the diffusion process, as well as the ability of the model to perform multi-task learning.

We present the Modality Integration Rate (MIR), an effective, robust, and generalized metric to indicate the multi-modal pre-training quality of Large Vision Language Models (LVLMs). Large-scale pre-training plays a critical role in building capable LVLMs, while evaluating its training quality without the costly supervised fine-tuning stage is under-explored. Loss, perplexity, and in-context evaluation results are commonly used pre-training metrics for Large Language Models (LLMs), while we observed that these metrics are less indicative when aligning a well-trained LLM with a new modality. Due to the lack of proper metrics, the research of LVLMs in the critical pre-training stage is hindered greatly, including the training data choice, efficient module design, etc. In this paper, we propose evaluating the pre-training quality from the inter-modal distribution distance perspective and present MIR, the Modality Integration Rate, which is 1) Effective to represent the pre-training quality and show a positive relation with the benchmark performance after supervised fine-tuning. 2) Robust toward different training/evaluation data. 3) Generalize across training configurations and architecture choices. We conduct a series of pre-training experiments to explore the effectiveness of MIR and observe satisfactory results that MIR is indicative about training data selection, training strategy schedule, and model architecture design to get better pre-training results. We hope MIR could be a helpful metric for building capable LVLMs and inspire the following research about modality alignment in different areas. Our code is at: https://github.com/shikiw/Modality-Integration-Rate.

Direct Preference Optimization (DPO) has emerged as an effective approach for aligning large language models (LLMs) with human preferences. However, its performance is highly dependent on the quality of the underlying human preference data. To address this bottleneck, prior work has explored various data selection strategies, but these methods often overlook the impact of the evolving states of the language model during the optimization process. In this paper, we introduce a novel problem: Sample Scheduling for DPO, which aims to dynamically and adaptively schedule training samples based on the model's evolving batch-wise states throughout preference optimization. To solve this problem, we propose SamS, an efficient and effective algorithm that adaptively selects samples in each training batch based on the LLM's learning feedback to maximize the potential generalization performance. Notably, without modifying the core DPO algorithm, simply integrating SamS significantly improves performance across tasks, with minimal additional computational overhead. This work points to a promising new direction for improving LLM alignment through batch-wise sample selection, with potential generalization to RLHF and broader supervised learning paradigms.

The rapid development of large vision-language model (VLM) has greatly promoted the research of GUI agent. However, GUI agents still face significant challenges in handling long-horizon tasks. First, single-agent models struggle to balance high-level capabilities and low-level execution capability, facing prevalent issues of responsibility coupling and capability conflicts. Second, agents lack awareness of the task state, leading to progress loss in long-horizon tasks. To address these challenges, we propose a staged execution-feedback reinforcement learning algorithm. Unlike training a unified policy model, we focus on training high-level scheduling models. Specifically, we propose and train two agents: a Coordinator, responsible for the strategic planning and task decomposition; and a State Tracker, responsible for context compression and information management to maintain the task's state and coherence. Based on this, we built the Coordinator-Executor-State Tracker (CES) multi-agent framework, which can be integrated with any low-level Executor model, assisting the Executor in solving long-horizon tasks through task scheduling and state management. Experiments on long-horizon task benchmarks demonstrate that CES significantly enhances the system's planning and state management capabilities. Furthermore, analysis confirms that our trained high-level scheduling module is a generalizable, plug-and-play module that significantly enhances the long-horizon capabilities of various Executors. Code can be available at https://github.com/hehehahi4/CES.

Weight-normalized (WN) training is emerging as a compelling alternative to conventional weight decay (WD), with recent studies reporting substantial pretraining loss gains. We show that these gains are driven primarily by the induced effective learning rate (ELR) trajectory rather than by normalization alone. Matching ELR trajectories largely collapses the training loss dynamics of WN and WD. Schedule design should therefore target ELR rather than the nominal learning rate (LR) alone. Building on this principle, we propose AIR (Affine Inverse-square-Root decay), which combines a theoretically derived 1/t decay with an affine adjustment to satisfy prescribed peak and terminal LRs over a finite training horizon. We further identify late-stage ELR scheduling as a key source of its gains, because a shared late schedule attenuates the effect of earlier LR choices. Experiments on 128 B-token Mixture-of-Experts pretraining demonstrate that AIR outperforms cosine and other candidate schedules in training loss, downstream performance, and hyperparameter robustness, reducing terminal training loss by approximately 0.01 relative to cosine at matched cumulative LR. Applying the same ELR trajectory to WD reproduces the corresponding training dynamics, showing that the benefits extend beyond fixed-norm training and establishing ELR as the principled scheduling object.

Domain generalization (DG) aims to learn domain-generalizable models from one or multiple source domains that can perform well in unseen target domains. Despite its recent progress, most existing work suffers from the misalignment between the difficulty level of training samples and the capability of contemporarily trained models, leading to over-fitting or under-fitting in the trained generalization model. We design MoDify, a Momentum Difficulty framework that tackles the misalignment by balancing the seesaw between the model's capability and the samples' difficulties along the training process. MoDify consists of two novel designs that collaborate to fight against the misalignment while learning domain-generalizable models. The first is MoDify-based Data Augmentation which exploits an RGB Shuffle technique to generate difficulty-aware training samples on the fly. The second is MoDify-based Network Optimization which dynamically schedules the training samples for balanced and smooth learning with appropriate difficulty. Without bells and whistles, a simple implementation of MoDify achieves superior performance across multiple benchmarks. In addition, MoDify can complement existing methods as a plug-in, and it is generic and can work for different visual recognition tasks.

We introduce VampNet, a masked acoustic token modeling approach to music synthesis, compression, inpainting, and variation. We use a variable masking schedule during training which allows us to sample coherent music from the model by applying a variety of masking approaches (called prompts) during inference. VampNet is non-autoregressive, leveraging a bidirectional transformer architecture that attends to all tokens in a forward pass. With just 36 sampling passes, VampNet can generate coherent high-fidelity musical waveforms. We show that by prompting VampNet in various ways, we can apply it to tasks like music compression, inpainting, outpainting, continuation, and looping with variation (vamping). Appropriately prompted, VampNet is capable of maintaining style, genre, instrumentation, and other high-level aspects of the music. This flexible prompting capability makes VampNet a powerful music co-creation tool. Code and audio samples are available online.

Diffusion models are a strong backbone for visual generation, but their inherently sequential denoising process leads to slow inference. Previous methods accelerate sampling by caching and reusing intermediate outputs based on feature distances between adjacent timesteps. However, existing caching strategies typically rely on raw feature differences that entangle content and noise. This design overlooks spectral evolution, where low-frequency structure appears early and high-frequency detail is refined later. We introduce Spectral-Evolution-Aware Cache (SeaCache), a training-free cache schedule that bases reuse decisions on a spectrally aligned representation. Through theoretical and empirical analysis, we derive a Spectral-Evolution-Aware (SEA) filter that preserves content-relevant components while suppressing noise. Employing SEA-filtered input features to estimate redundancy leads to dynamic schedules that adapt to content while respecting the spectral priors underlying the diffusion model. Extensive experiments on diverse visual generative models and the baselines show that SeaCache achieves state-of-the-art latency-quality trade-offs.

In this work, we share three insights for achieving state-of-the-art aesthetic quality in text-to-image generative models. We focus on three critical aspects for model improvement: enhancing color and contrast, improving generation across multiple aspect ratios, and improving human-centric fine details. First, we delve into the significance of the noise schedule in training a diffusion model, demonstrating its profound impact on realism and visual fidelity. Second, we address the challenge of accommodating various aspect ratios in image generation, emphasizing the importance of preparing a balanced bucketed dataset. Lastly, we investigate the crucial role of aligning model outputs with human preferences, ensuring that generated images resonate with human perceptual expectations. Through extensive analysis and experiments, Playground v2.5 demonstrates state-of-the-art performance in terms of aesthetic quality under various conditions and aspect ratios, outperforming both widely-used open-source models like SDXL and Playground v2, and closed-source commercial systems such as DALLE 3 and Midjourney v5.2. Our model is open-source, and we hope the development of Playground v2.5 provides valuable guidelines for researchers aiming to elevate the aesthetic quality of diffusion-based image generation models.

Metric-induced discrete flow matching (MI-DFM) exploits token-latent geometry for discrete generation, but its practical use is limited by two issues: heuristic schedulers requiring hyperparameter search, and finite-step path-tracking error from its first-order continuous-time Markov chain (CTMC) solver. We address both issues. First, we derive a kinetic-optimal scheduler for prescribed scalar-parameterized probability paths, and instantiate it for MI-DFM as a training-free numerical schedule that traverses the path at constant Fisher-Rao speed. Second, we introduce a finite-step moment correction that adjusts the jump probability while preserving the CTMC jump destination distribution. We validate the resulting method, GibbsTTS, on codec-based zero-shot text-to-speech (TTS). Under controlled comparisons with a unified architecture and large-scale dataset, GibbsTTS achieves the best objective naturalness and is preferred in subjective evaluations over masked discrete generative baselines. Additionally, in comparison with the evaluated state-of-the-art TTS systems, GibbsTTS shows strong speaker similarity, achieving the highest similarity on three of four test sets and ranking second on the fourth. Project page: https://ydqmkkx.github.io/GibbsTTSProject

LLMs are commonly trained with a learning rate (LR) warmup, followed by cosine decay to 10% of the maximum (10x decay). In a large-scale empirical study, we show that under an optimal peak LR, a simple linear decay-to-zero (D2Z) schedule consistently outperforms other schedules when training at compute-optimal dataset sizes. D2Z is superior across a range of model sizes, batch sizes, datasets, and vocabularies. Benefits increase as dataset size increases. Leveraging a novel interpretation of AdamW as an exponential moving average of weight updates, we show how linear D2Z optimally balances the demands of early training (moving away from initial conditions) and late training (averaging over more updates in order to mitigate gradient noise). In experiments, a 610M-parameter model trained for 80 tokens-per-parameter (TPP) using D2Z achieves lower loss than when trained for 200 TPP using 10x decay, corresponding to an astonishing 60% compute savings. Models such as Llama2-7B, trained for 286 TPP with 10x decay, could likely have saved a majority of compute by training with D2Z.

While Flow Matching theoretically guarantees constant-velocity trajectories, we identify a critical breakdown in high-dimensional practice: the Velocity Deficit. We show that the MSE objective systematically underestimates velocity magnitude, causing generated samples to fail to reach the data manifold-a phenomenon we term Integration Lag. To rectify this, we propose Initial Energy Injection, instantiated via two complementary methods: the training-based Magnitude-Aware Flow Matching (MAFM) and the training-free Scale Schedule Corrector (SSC). Both are grounded in our discovery of a crucial asymmetry: velocity contraction causes harmful kinetic stagnation at the trajectory's start, yet acts as a beneficial denoising mechanism at its end. Empirically, SSC yields significant efficiency gains with zero retraining and just one line of code. On ImageNet-1k (256x256), it improves FID by 44.6% (from 13.68 to 7.58) and achieves a 5x speedup, enabling a 50-step generator (FID 7.58) to beat a 250-step baseline (FID 8.65). Furthermore, our methods generalize to Text-to-Image tasks and high-resolution generation, improving FID on MS-COCO by ~22%.

As context lengths scale, attention increasingly becomes a primary computational bottleneck in large language models. Standard Transformers remain powerful but computationally inefficient, as they allocate the same attention budget to every token regardless of its contextual demand. Existing local-global hybrids provide a more efficient alternative by mixing restricted- and full-context attention, but they typically allocate span statically across layers or heads. To address these limitations, we propose LoGo, a token-level dynamic local-global attention mechanism that uses attention span as a direct proxy for attention budget allocation. Each LoGo layer contains coupled local and global branches: all tokens receive efficient local attention over a restricted context window, while a learned gate activates global attention with full-context access only for tokens requiring long-range information. A threshold-based budget controller maintains a target global ratio without auxiliary losses, and a progressive masking schedule stabilizes training before sparse routing takes effect. We further implement query-sparse Triton kernels that convert reduced global-attention computation into practical speedups. Extensive experiments validate LoGo's effectiveness, showing that it preserves the scaling behavior of full-attention Transformers across model sizes. In controlled comparisons, LoGo improves over the full-attention Transformer and matched-budget static local-global hybrids, with clear gains on long-range retrieval. Analysis further shows that LoGo learns interpretable span allocation patterns. These results suggest that learned token-level span allocation is an effective and scalable way to improve the long-context performance-compute trade-off.

World action models (WAMs) predict the future alongside actions during training. Due to the heavy computation cost of video denoising, whether the future must still be generated during inference is disputed: Explicit WAMs denoise it into clean frames along with every action chunk, whereas Latent WAMs discard it entirely for acceleration. We find that latent WAMs, despite matching explicit ones on in-distribution tasks, fail to retain the generalization benefits that originally motivated WAMs. To demonstrate this, we evaluate generalization along three axes: environmental perturbation, data efficiency, and task generalization. Controlled comparisons with a matched backbone, training data, and budget reveal consistent degradation across all three axes when the action expert no longer conditions on future representations. Further analysis shows that the gap arises almost entirely from the first denoising step: the benefit comes from preparing the future, not generating it. We therefore propose Simple-WAM, which simplifies future modeling into a single forward pass of fully noised video tokens and adapts the training-time noise schedule to this inference behavior. Across simulation and real-world tasks, Simple-WAM achieves the best of both worlds, leading explicit WAMs in generalization performance with efficiency comparable to Latent WAMs. Project Page: https://zrporz.github.io/Simple-WAM-Web/

Repurposing pre-trained diffusion models has been proven to be effective for NVS. However, these methods are mostly limited to a single object; directly applying such methods to compositional multi-object scenarios yields inferior results, especially incorrect object placement and inconsistent shape and appearance under novel views. How to enhance and systematically evaluate the cross-view consistency of such models remains under-explored. To address this issue, we propose MOVIS to enhance the structural awareness of the view-conditioned diffusion model for multi-object NVS in terms of model inputs, auxiliary tasks, and training strategy. First, we inject structure-aware features, including depth and object mask, into the denoising U-Net to enhance the model's comprehension of object instances and their spatial relationships. Second, we introduce an auxiliary task requiring the model to simultaneously predict novel view object masks, further improving the model's capability in differentiating and placing objects. Finally, we conduct an in-depth analysis of the diffusion sampling process and carefully devise a structure-guided timestep sampling scheduler during training, which balances the learning of global object placement and fine-grained detail recovery. To systematically evaluate the plausibility of synthesized images, we propose to assess cross-view consistency and novel view object placement alongside existing image-level NVS metrics. Extensive experiments on challenging synthetic and realistic datasets demonstrate that our method exhibits strong generalization capabilities and produces consistent novel view synthesis, highlighting its potential to guide future 3D-aware multi-object NVS tasks.

Most image generation models rely on uniform tokenization, allocating the exact same computational budget to equally-sized image patches. This static paradigm cannot adapt to different resource constraints at inference time, and yields suboptimal quality-cost tradeoff by devoting the same effort to both plain backgrounds and intricate details. We propose BudgetPix, an adaptive tokenization framework that dynamically allocates compute based on visual complexity and spatial layout, enabling flexible computational budgeting at inference time. BudgetPix comprises three key components: (1) an adaptive encoder that maps a fixed-size image to a variable-length token sequence using an entropy-guided quadtree alongside a multi-scale patch embedder; (2) a scale-aware decoder reconstructs fixed-resolution images from multi-scale token sets; and (3) a flexible training and sampling schedule that enables pixel-space denoisers to operate across variable token counts. BudgetPix seamlessly integrates with existing pixel-space diffusion architectures, enabling a single checkpoint to be operated at a wide range of compute budgets. Evaluated on text-to-image generation, BudgetPix matches the fidelity of MiniT2I-L at 512^2 and PixelDiT at 1024^2 using just 25% of the original compute budget. In class-conditional generation using a MeanFlow backbone, BudgetPix requires merely 60% of the full compute budget to produce images with near-zero quality degradation, observing a marginal 0.8-point increase in FID. Comprehensive assessments by human and VLM judges confirm that BudgetPix establishes a significantly improved quality-efficiency tradeoff over prior budget-adaptive baselines. More details are available at our project page: https://karaozgur.com/BudgetPix

GRPO-based LLM post-training commonly samples multiple trajectories from the same prompt and then trains on the resulting group. In long-context GRPO workloads, this shared prompt-side prefix can contain retrieved passages, visual tokens, tool schemas, system instructions, or task context, while the full rollout group is still too large to pack into one training microbatch. Standard dense trainers therefore recompute the same prefix forward and backward for every trajectory. We present a schedule-level reuse mechanism that decouples prefix and suffix computation. The schedule runs prefix forward once, executes suffixes as ordinary microbatches while reading prefix K/V and accumulating prefix-side gK/gV , and then runs prefix backward once on the accumulated gradient cache. This reordered schedule is equivalent to baseline training over real arithmetic and aligns numerically within finite-precision tolerance. Because only K/V and gK/gV are hot during suffix computation, the approach offloads dormant prefix activations, integrates with TP/EP/CP/PP and DP-style placement at the execution level, and preserves aux-loss-based MoE router semantics through logical prefix-token accounting. On dense Llama3-8B, Qwen3-8B, and MoE Qwen3-MoE-30B-A3B configurations, the schedule matches optimizer updates across TP/CP/PP/EP combinations, aligns on a 100-step real GRPO actor-update trace replay, reaches up to 4.395x speedup (2.930x under a conservative compile-on comparison) as prefix ratio and GRPO group size grow, and reduces Phase-B peak HBM by up to 59.1%, extending the Llama3-8B capacity frontier from 17,920 to 29,696 total tokens.

The composition of training data, governed by the diversity of sources and their mixing strategy, is a cornerstone of Large Language Model (LLM) pre-training. Online Data Mixing (ODM), the technique of adaptively adjusting data mixtures during training, has emerged as a promising direction to improve efficiency. However, existing methods are constrained by their reliance on a singular optimization perspective, which fundamentally overlooks the need for complex LLM pre-training to consider the dynamic data composition from multiple dimensions. To overcome this limitation, we introduce the Holistic Data Scheduler (HDS), a novel online data mixing framework. HDS formulates the data scheduling challenge as a reinforcement learning problem in a continuous control space and leverages the Soft Actor-Critic (SAC) algorithm for its stability and sample efficiency in exploring the high-dimensional policy space. At the core of HDS lies a novel multi-objective, holistic reward function that integrates three critical perspectives: a data-driven reward for quality, a loss-driven reward capturing inter-domain influence, and a model-driven reward based on weight norms. To validate our design and determine its optimal configuration, we conducted systematic experiments on LLMs of various sizes. On The Pile benchmark, HDS reaches the final validation perplexity of the next best method with 44% fewer training iterations. Furthermore, it achieves a 7.2% improvement on the MMLU 0-shot task along with consistent gains on other benchmarks, showcasing its ability to enhance both training efficiency and final model capability.

Diffusion models have emerged as the de facto choice for generating visual signals. However, training a single model to predict noise across various levels poses significant challenges, necessitating numerous iterations and incurring significant computational costs. Various approaches, such as loss weighting strategy design and architectural refinements, have been introduced to expedite convergence. In this study, we propose a novel approach to design the noise schedule for enhancing the training of diffusion models. Our key insight is that the importance sampling of the logarithm of the Signal-to-Noise ratio (logSNR), theoretically equivalent to a modified noise schedule, is particularly beneficial for training efficiency when increasing the sample frequency around log SNR=0. We empirically demonstrate the superiority of our noise schedule over the standard cosine schedule. Furthermore, we highlight the advantages of our noise schedule design on the ImageNet benchmark, showing that the designed schedule consistently benefits different prediction targets.

Deep learning practitioners often operate on a computational and monetary budget. Thus, it is critical to design optimization algorithms that perform well under any budget. The linear learning rate schedule is considered the best budget-aware schedule, as it outperforms most other schedules in the low budget regime. On the other hand, learning rate schedules -- such as the 30-60-90 step schedule -- are known to achieve high performance when the model can be trained for many epochs. Yet, it is often not known a priori whether one's budget will be large or small; thus, the optimal choice of learning rate schedule is made on a case-by-case basis. In this paper, we frame the learning rate schedule selection problem as a combination of i) selecting a profile (i.e., the continuous function that models the learning rate schedule), and ii) choosing a sampling rate (i.e., how frequently the learning rate is updated/sampled from this profile). We propose a novel profile and sampling rate combination called the Reflected Exponential (REX) schedule, which we evaluate across seven different experimental settings with both SGD and Adam optimizers. REX outperforms the linear schedule in the low budget regime, while matching or exceeding the performance of several state-of-the-art learning rate schedules (linear, step, exponential, cosine, step decay on plateau, and OneCycle) in both high and low budget regimes. Furthermore, REX requires no added computation, storage, or hyperparameters.

Learning rate scheduling is essential in transformer training, where the final annealing plays a crucial role in getting the best performance. However, the mechanisms behind this cooldown phase, with its characteristic drop in loss, remain poorly understood. To address this, we provide a comprehensive analysis focusing solely on the cooldown phase in the Warmup-Stable-Decay (WSD) learning rate scheduler. Our analysis reveals that different cooldown shapes reveal a fundamental bias-variance trade-off in the resulting models, with shapes that balance exploration and exploitation consistently outperforming alternatives. Similarly, we find substantial performance variations x2013 comparable to those from cooldown shape selection x2013 when tuning AdamW hyperparameters. Notably, we observe consistent improvements with higher values of beta_2 during cooldown. From a loss landscape perspective, we provide visualizations of the landscape during cooldown, supporting the river valley loss perspective empirically. These findings offer practical recommendations for configuring the WSD scheduler in transformer training, emphasizing the importance of optimizing the cooldown phase alongside traditional hyperparameter tuning.

The ever-growing availability of unlabeled data presents both opportunities and challenges for training artificial intelligence systems. While self-supervised learning (SSL) has emerged as a powerful paradigm for extracting meaningful representations from vast amounts of unlabeled data, existing methods still struggle to adapt to the non-stationary, non-IID nature of real-world data streams without forgetting previously learned knowledge. Recent works have adopted a repeated cosine annealing schedule for large-scale continual pre-training; however, these schedules (1) inherently cause forgetting during the re-warming phase and (2) have not been systematically compared to existing continual SSL methods. In this work, we systematically compare the widely used cosine schedule with the recently proposed infinite learning rate schedule and empirically find the latter to be a more effective alternative. Our extensive empirical evaluation across diverse image and language datasets demonstrates that the infinite learning rate schedule consistently enhances continual pre-training performance compared to a repeated cosine decay without being restricted to a fixed iteration budget. For instance, in a small-scale MAE pre-training setup, it outperforms several strong baselines from the literature. We then scale up our experiments to larger MAE pre-training and autoregressive language model pre-training. Our results show that the infinite learning rate schedule remains effective at scale, surpassing repeated cosine decay for both MAE pre-training and zero-shot LM benchmarks.

The expanding computational costs and limited resources underscore the critical need for budgeted-iteration training, which aims to achieve optimal learning within predetermined iteration budgets.While learning rate schedules fundamentally govern the performance of different networks and tasks, particularly in budgeted-iteration scenarios, their design remains largely heuristic, lacking theoretical foundations.In addition, the optimal learning rate schedule requires extensive trial-and-error selection, making the training process inefficient.In this work, we propose the Unified Budget-Aware (UBA) schedule, a theoretically grounded learning rate schedule that consistently outperforms commonly-used schedules among diverse architectures and tasks under different constrained training budgets.First, we bridge the gap by constructing a novel training budget-aware optimization framework, which explicitly accounts for the robustness to landscape curvature variations.From this framework, we derive the UBA schedule, controlled by a single hyper-parameter varphi that provides a trade-off between flexibility and simplicity, eliminating the need for per-network numerical optimization. Moreover, we establish a theoretical connection between varphi and the condition number, adding interpretation and justification to our approach. Besides, we prove the convergence for different values of varphi.We offer practical guidelines for its selection via theoretical analysis and empirical results.xtensive experimental results show that UBA consistently surpasses the commonly-used schedules across diverse vision and language tasks, spanning network architectures (e.g., ResNet, OLMo) and scales, under different training-iteration budgets.

Recent advances in learning rate (LR) scheduling have demonstrated the effectiveness of decay-free approaches that eliminate the traditional decay phase while maintaining competitive performance. Model merging techniques have emerged as particularly promising solutions in this domain. We present Warmup-Stable and Merge (WSM), a general framework that establishes a formal connection between learning rate decay and model merging. WSM provides a unified theoretical foundation for emulating various decay strategies-including cosine decay, linear decay and inverse square root decay-as principled model averaging schemes, while remaining fully compatible with diverse optimization methods. Through extensive experiments, we identify merge duration-the training window for checkpoint aggregation-as the most critical factor influencing model performance, surpassing the importance of both checkpoint interval and merge quantity. Our framework consistently outperforms the widely-adopted Warmup-Stable-Decay (WSD) approach across multiple benchmarks, achieving significant improvements of +3.5% on MATH, +2.9% on HumanEval, and +5.5% on MMLU-Pro. The performance advantages extend to supervised fine-tuning scenarios, highlighting WSM's potential for long-term model refinement.

Reinforcement learning (RL) for dexterous manipulation must discover finger-object contacts and then control the object precisely; the action noise that serves the first goal can interfere with the second. In trajectory-guided settings such as ViViDex, where RL refine hand-object trajectories from human video, our baseline PPO runs end near their initial action noise after 5M steps, motivating explicit control of exploration scale. DexPolicy makes that scale an explicit function of training steps, annealing from broad to narrow exploration while holding loss, architecture, reward, and optimizer settings fixed. We study three policy-optimization settings: PPO, critic-free GRPO continuation, and a flow-parameterized PPO variant (FPO). Across five YCB objects and three training seeds, mean deterministic Target success rises from 49.4% to 68.1% (FPO), 14.1% to 45.4% (GRPO), and 32.0% to 35.7% (PPO). On a RealMan RM75 arm with an Inspire/RH56 hand, 360 trials over three objects raise mean Target success from 25.0% to 85.0% (FPO), 10.0% to 63.3% (GRPO), and 8.3% to 43.3% (PPO), with one trained model per object-method condition. PPO component screening favors noise control over the tested optimizer contraction; the selected PPO schedule yields higher mean Target success than linear decay with the same endpoints on three tested objects. Training return, deterministic Target success, and tolerance to execution noise dissociate; schedules should therefore be judged by terminal task success under the intended execution conditions, per task and policy-optimization setting. Code: https://github.com/AIGeeksGroup/DexPolicy. Website: https://aigeeksgroup.github.io/DexPolicy.

The current standard approach to scaling transformer language models trains each model size from a different random initialization. As an alternative, we consider a staged training setup that begins with a small model and incrementally increases the amount of compute used for training by applying a "growth operator" to increase the model depth and width. By initializing each stage with the output of the previous one, the training process effectively re-uses the compute from prior stages and becomes more efficient. Our growth operators each take as input the entire training state (including model parameters, optimizer state, learning rate schedule, etc.) and output a new training state from which training continues. We identify two important properties of these growth operators, namely that they preserve both the loss and the "training dynamics" after applying the operator. While the loss-preserving property has been discussed previously, to the best of our knowledge this work is the first to identify the importance of preserving the training dynamics (the rate of decrease of the loss during training). To find the optimal schedule for stages, we use the scaling laws from (Kaplan et al., 2020) to find a precise schedule that gives the most compute saving by starting a new stage when training efficiency starts decreasing. We empirically validate our growth operators and staged training for autoregressive language models, showing up to 22% compute savings compared to a strong baseline trained from scratch. Our code is available at https://github.com/allenai/staged-training.

Background: Recursive reasoning models achieve strong performance through iterative refinement, allowing small networks to match large language models. However, training is computationally expensive, often requiring 36 GPU-hours for Sudoku extreme. Existing models use fixed recursion depth and uniform supervision weighting, leading to inefficient training. Objectives: We propose CGAR (Curriculum-Guided Adaptive Recursion), applying curriculum learning to architectural depth. CGAR introduces Progressive Depth Curriculum (PDC) to dynamically adjust recursion depth and Hierarchical Supervision Weighting (HSW) to apply exponentially decaying importance to supervision steps. Methods: PDC implements a three-stage schedule transitioning from shallow (2, 1) to full depth (6, 3) configurations, providing 41.4% FLOPs reduction. HSW applies exponential decay to supervision steps, achieving 40% gradient variance reduction and accelerated convergence. Results: On Sudoku-Extreme, CGAR achieves 1.71x training speedup (10.93 to 6.38 hours) with only a 0.63% accuracy drop (86.65% to 86.02%). PDC alone achieves 2.26x speedup with 85.47% accuracy, showing a Pareto improvement in efficiency and quality. HSW provides 1.61x speedup. CGAR-trained models show superior inference efficiency with 100% halting accuracy and 11% fewer reasoning steps. Conclusions: CGAR enables efficient training of recursive models on modest hardware. By treating depth as a scheduled parameter, it achieves substantial savings and prevents overfitting, making these models practical for neurosymbolic AI and program synthesis. https://github.com/Kaleemullahqasim/CGAR and huggingface.co/Kaleemullah/trm-cgar-sudoku.

Multi-representation diffusion models can improve visual synthesis by denoising complementary views of an image, but their performance depends critically on the asynchronous schedule that determines when each representation is denoised. We propose to learn this schedule. Our method formulates asynchronous flow matching over multiple representation spaces and uses a schedule-corrected objective that keeps each representation's local noising-time weights fixed as the schedule changes. We instantiate the schedule with a flexible parametric class that is convex and monotone by construction, and learn it using a fast joint probe with less than 1% additional training compute. On ImageNet 256x256, the learned schedule substantially improves both convergence speed and final quality under a matched 675M-parameter XL backbone. With AutoGuidance, our 200-epoch model reaches FID 1.05, matching the 800-epoch SFD-XL baseline with 4x less training. Training to 600 epochs further improves to FID 1.02, outperforming the 1B-parameter SFD-XXL result of FID 1.04 while using a smaller model. In the unguided setting, our 200-epoch model reaches FID 2.37, already below the best 800-epoch SFD-XL result (2.54) at 4x less training, and improves to FID 2.14 at 600 epochs. Code is available at https://github.com/bsq532087/LWD

Multi-arm robot platforms, including bimanual and humanoid robots, have the capability to complete tasks with lower cycle times than single-arm systems, but they are more difficult to safely control due to the presence of multi-arm constraints. The paradigm of training generalist robot policies from massive datasets is a promising approach to address general-purpose multi-arm manipulation, but the acquisition of large multi-arm manipulation datasets remains a bottleneck. Automated demonstration generation can alleviate this burden by synthesizing new demonstrations from a handful of source demonstrations, but existing algorithms ignore multi-arm constraints and as a result often induce unsafe and unsuccessful behaviors. We address this limitation by introducing ScheduleGen, an integrated planning & scheduling algorithm for multi-arm demonstration generation. We evaluate ScheduleGen on 28 simulation task variants, including seven externally authored RoboDojo tasks and settings inaccessible to prior systems; it achieves 79.6% mean data-generation success and trains policies with 65.5% mean success. ScheduleGen policies outperform those trained on a state-of-the-art data generation baseline, and achieve 50-80% success across eight real-world variants through zero-shot sim-to-real and real-to-sim-to-real transfer. Videos and more at: https://schedulegen.github.io/

Acceleration of large language model pre-training is a critical issue in present NLP research. In this paper, we focus on speeding up pre-training by progressively growing from a small Transformer structure to a large one. There are two main research problems related to progressive growth: growth schedule and growth operator. For growth schedule, existing work has explored multi-stage expansion of depth and feedforward layers. However, the impact of each dimension on the schedule's efficiency is still an open question. For growth operator, existing work relies on the initialization of new weights to inherit knowledge, and achieve only non-strict function preservation, limiting further optimization of training dynamics. To address these issues, we propose Masked Structural Growth (MSG), including growth schedules involving all possible dimensions and strictly function-preserving growth operators that is independent of the initialization of new weights. Experiments show that MSG is significantly faster than related work: we achieve a speed-up of 80% for Bert-base and 120% for Bert-large pre-training. Moreover, MSG is able to improve fine-tuning performances at the same time.

The learning rate (LR) schedule is one of the most important hyper-parameters needing careful tuning in training DNNs. However, it is also one of the least automated parts of machine learning systems and usually costs significant manual effort and computing. Though there are pre-defined LR schedules and optimizers with adaptive LR, they introduce new hyperparameters that need to be tuned separately for different tasks/datasets. In this paper, we consider the question: Can we automatically tune the LR over the course of training without human involvement? We propose an efficient method, AutoLRS, which automatically optimizes the LR for each training stage by modeling training dynamics. AutoLRS aims to find an LR applied to every tau steps that minimizes the resulted validation loss. We solve this black-box optimization on the fly by Bayesian optimization (BO). However, collecting training instances for BO requires a system to evaluate each LR queried by BO's acquisition function for tau steps, which is prohibitively expensive in practice. Instead, we apply each candidate LR for only tau'lltau steps and train an exponential model to predict the validation loss after tau steps. This mutual-training process between BO and the loss-prediction model allows us to limit the training steps invested in the BO search. We demonstrate the advantages and the generality of AutoLRS through extensive experiments of training DNNs for tasks from diverse domains using different optimizers. The LR schedules auto-generated by AutoLRS lead to a speedup of 1.22times, 1.43times, and 1.5times when training ResNet-50, Transformer, and BERT, respectively, compared to the LR schedules in their original papers, and an average speedup of 1.31times over state-of-the-art heavily-tuned LR schedules.

Text-to-video (T2V) generation has gained significant attention due to its wide applications to video generation, editing, enhancement and translation, \etc. However, high-quality (HQ) video synthesis is extremely challenging because of the diverse and complex motions existed in real world. Most existing works struggle to address this problem by collecting large-scale HQ videos, which are inaccessible to the community. In this work, we show that publicly available limited and low-quality (LQ) data are sufficient to train a HQ video generator without recaptioning or finetuning. We factorize the whole T2V generation process into two steps: generating an image conditioned on a highly descriptive caption, and synthesizing the video conditioned on the generated image and a concise caption of motion details. Specifically, we present Factorized-Dreamer, a factorized spatiotemporal framework with several critical designs for T2V generation, including an adapter to combine text and image embeddings, a pixel-aware cross attention module to capture pixel-level image information, a T5 text encoder to better understand motion description, and a PredictNet to supervise optical flows. We further present a noise schedule, which plays a key role in ensuring the quality and stability of video generation. Our model lowers the requirements in detailed captions and HQ videos, and can be directly trained on limited LQ datasets with noisy and brief captions such as WebVid-10M, largely alleviating the cost to collect large-scale HQ video-text pairs. Extensive experiments in a variety of T2V and image-to-video generation tasks demonstrate the effectiveness of our proposed Factorized-Dreamer. Our source codes are available at https://github.com/yangxy/Factorized-Dreamer/.

Diffusion and flow-matching schedules control the signal and noise coefficients that mix data and noise along affine probability paths. Minimizing a kinetic action defined on coefficient paths, motivated by optimal transport, helps explain strong baselines but remains model-agnostic and ignores prediction error. Here we introduce a model-aware schedule construction based on fiberwise optimal transport. At a fixed time and state on the probability path, compatible signal/noise decompositions form an affine fiber. We define a fiberwise prediction risk by averaging optimal-transport costs between the true and predictor-induced decompositions within these fibers. On a fixed coefficient curve, combining this risk with coefficient-path kinetic action yields a closed-form optimal time allocation. This construction extends to general linear prediction targets, and the risk profile can be estimated from an early baseline checkpoint. We evaluate DDPMs and flow matching across prediction targets, training configurations, risk-estimation checkpoints, datasets, and architectures. Our model-aware schedules consistently outperform strong baselines, including a 38.6% relative FID reduction for flow matching on CIFAR-10 at 16 function evaluations. Each model-agnostic kinetic baseline determines its own kinetic reference coordinate. In these coordinates, fiberwise-risk profiles from independently trained models in different settings align closely after normalization to unit area. The resulting schedule deformations used in training also align, suggesting empirical universality across the evaluated models and settings. Pretrained-checkpoint diagnostics extend this normalized-risk agreement to larger conditional latent diffusion and 2-RF models. A frozen analytic allocation template retains most of the model-aware improvement without further risk estimation or model-specific fitting.

Unified audio-video creation requires a single model capable of text-conditioned joint synthesis, bidirectional cross-modal generation, and instruction-guided editing across both modalities. Existing methods rely heavily on paired corpora, which are scarce for joint generation and even rarer for editing. Consequently, they are spent learning single-branch generative and editing capabilities that abundant unimodal data could readily teach, rather than on the cross-modal coupling. Furthermore, prevailing systems apply a single shared noise schedule to both modalities, neglecting two critical limitations. First, due to the significant discrepancy in information density, video requires prolonged high noise to organize spatial and motion structure, whereas the sparser audio signal can settle earlier during the synthesis process, the dynamics a uniform schedule might compromise. Second, lockstep denoising leaves asymmetric workflows, such as conditioning on one modality to synthesize or edit another, untrained. We present UniAVC, which addresses both obstacles. It first trains each branch on unimodal dataset to full generative and editing competence, and subsequently dedicates paired data to exploit cross-modal correspondence. Modality-decoupled schedulers meanwhile warp the noise schedule independently from a shared timestep, while subtasks with one clean modality directly supervise asymmetric configurations. These settings respectively enable intent-aware editing, which preserves one modality intact while enlisting it to constrain the other, and post-inference self-refinement, which regenerates only an unsatisfactory branch against an accepted one. UniAVC thus spans multiple creation tasks from a single set of weights without task-specific adapters.

Language models are often trained to maximize the likelihood of the next token given past tokens in the training dataset. However, during inference time, they are utilized differently, generating text sequentially and auto-regressively by using previously generated tokens as input to predict the next one. Marginal differences in predictions at each step can cascade over successive steps, resulting in different distributions from what the models were trained for and potentially leading to unpredictable behavior. This paper proposes two simple approaches based on model own generation to address this discrepancy between the training and inference time. Our first approach is Batch-Scheduled Sampling, where, during training, we stochastically choose between the ground-truth token from the dataset and the model's own generated token as input to predict the next token. This is done in an offline manner, modifying the context window by interleaving ground-truth tokens with those generated by the model. Our second approach is Reference-Answer-based Correction, where we explicitly incorporate a self-correction capability into the model during training. This enables the model to effectively self-correct the gaps between the generated sequences and the ground truth data without relying on an external oracle model. By incorporating our proposed strategies during training, we have observed an overall improvement in performance compared to baseline methods, as demonstrated by our extensive experiments using summarization, general question-answering, and math question-answering tasks.

Training large models is both resource-intensive and time-consuming, making it crucial to understand the quantitative relationship between model performance and hyperparameters. In this paper, we present an empirical law that describes how the pretraining loss of large language models evolves under different learning rate schedules, such as constant, cosine, and step decay schedules. Our proposed law takes a multi-power form, combining a power law based on the sum of learning rates and additional power laws to account for a loss reduction effect induced by learning rate decay. We extensively validate this law on various model sizes and architectures, and demonstrate that after fitting on a few learning rate schedules, the law accurately predicts the loss curves for unseen schedules of different shapes and horizons. Moreover, by minimizing the predicted final pretraining loss across learning rate schedules, we are able to find a schedule that outperforms the widely used cosine learning rate schedule. Interestingly, this automatically discovered schedule bears some resemblance to the recently proposed Warmup-Stable-Decay (WSD) schedule (Hu et al, 2024) but achieves a slightly lower final loss. We believe these results could offer valuable insights for understanding the dynamics of pretraining and designing learning rate schedules to improve efficiency.

Knowledge Distillation (KD) trains a smaller student model using a large, pre-trained teacher model, with temperature as a key hyperparameter controlling the softness of output probabilities. Traditional methods use a fixed temperature throughout training, which is suboptimal. Moreover, architectural differences between teacher and student often result in mismatched logit magnitudes. We demonstrate that students benefit from softer probabilities early in training but require sharper probabilities in later stages. We introduce Dynamic Temperature Scheduler (DTS), which adjusts temperature dynamically based on the cross-entropy loss gap between teacher and student. To our knowledge, this is the first temperature scheduling method that adapts based on the divergence between teacher and student distributions. Our method integrates seamlessly with existing KD frameworks. We validate DTS across multiple KD strategies on vision (CIFAR-100, Tiny-ImageNet) and NLP tasks (GLUE, Dolly, SelfIns, UnNI, S-NI), consistently outperforming static-temperature baselines. Code is available at https://github.com/Sibgat-Ul/DTS.

Diffusion models have achieved impressive generative quality across modalities like 2D images, videos, and 3D shapes, but their inference remains computationally expensive due to the iterative denoising process. While recent caching-based methods effectively reuse redundant computations to speed up 2D and video generation, directly applying these techniques to 3D diffusion models can severely disrupt geometric consistency. In 3D synthesis, even minor numerical errors in cached latent features accumulate, causing structural artifacts and topological inconsistencies. To overcome this limitation, we propose Fast3Dcache, a training-free geometry-aware caching framework that accelerates 3D diffusion inference while preserving geometric fidelity. Our method introduces a Predictive Caching Scheduler Constraint (PCSC) to dynamically determine cache quotas according to voxel stabilization patterns and a Spatiotemporal Stability Criterion (SSC) to select stable features for reuse based on velocity magnitude and acceleration criterion. Comprehensive experiments show that Fast3Dcache accelerates inference significantly, achieving up to a 27.12% speed-up and a 54.8% reduction in FLOPs, with minimal degradation in geometric quality as measured by Chamfer Distance (2.48%) and F-Score (1.95%).

Despite recent text-to-image models achieving highfidelity text rendering, they still struggle with long or multiple texts due to diluted global attention. We propose DCText, a training-free visual text generation method that adopts a divide-and-conquer strategy, leveraging the reliable short-text generation of Multi-Modal Diffusion Transformers. Our method first decomposes a prompt by extracting and dividing the target text, then assigns each to a designated region. To accurately render each segment within their regions while preserving overall image coherence, we introduce two attention masks - Text-Focus and Context-Expansion - applied sequentially during denoising. Additionally, Localized Noise Initialization further improves text accuracy and region alignment without increasing computational cost. Extensive experiments on single- and multisentence benchmarks show that DCText achieves the best text accuracy without compromising image quality while also delivering the lowest generation latency.

To obtain a language model for a target domain (e.g. math), the current paradigm is to pre-train on a vast amount of generic web text and then fine-tune on the relatively limited amount of target data. Typically, generic data is only mixed in during fine-tuning to prevent catastrophic forgetting of the generic domain. We surprisingly find that replaying the generic data during fine-tuning can actually improve performance on the (less related) target task. Concretely, in a controlled pre-training environment with 4M target tokens, 4B total tokens, and 150M parameter models, generic replay increases target data efficiency by up to 1.87times for fine-tuning and 2.06times for mid-training. We further analyze data schedules that introduce target data during pre-training and find that replay helps more when there is less target data present in pre-training. We demonstrate the success of replay in practice for fine-tuning 8B parameter models, improving agentic web navigation success by 4.5% and Basque question-answering accuracy by 2%.

We introduce BézierFlow, a lightweight training approach for few-step generation with pretrained diffusion and flow models. BézierFlow achieves a 2-3x performance improvement for sampling with leq 10 NFEs while requiring only 15 minutes of training. Recent lightweight training approaches have shown promise by learning optimal timesteps, but their scope remains restricted to ODE discretizations. To broaden this scope, we propose learning the optimal transformation of the sampling trajectory by parameterizing stochastic interpolant (SI) schedulers. The main challenge lies in designing a parameterization that satisfies critical desiderata, including boundary conditions, differentiability, and monotonicity of the SNR. To effectively meet these requirements, we represent scheduler functions as Bézier functions, where control points naturally enforce these properties. This reduces the problem to learning an ordered set of points in the time range, while the interpretation of the points changes from ODE timesteps to Bézier control points. Across a range of pretrained diffusion and flow models, BézierFlow consistently outperforms prior timestep-learning methods, demonstrating the effectiveness of expanding the search space from discrete timesteps to Bézier-based trajectory transformations.

RL post-training strategies are dataset-dependent and reveal a recurring empirical pattern: capacity parameters accumulate monotonically across stages, while regularization parameters predominantly oscillate in response to shifting training dynamics. This distinction matters because fixed schedules commit all parameters to fixed trajectories and therefore cannot express the non-stationary exploration-exploitation tradeoffs that regularization must track; the principle provides actionable design rules for multi-stage training. We discover this through LLMZero, a system where LLM agents search over training trajectories via tree search, diagnosing pathologies at each checkpoint and proposing coordinated multi-parameter transitions. Across 4 diverse GRPO tasks, LLMZero discovers strategies that improve over the base model by 9% to 140% relative and over grid search by 6% to 15% relative, consistently outperforming random search and the skill-based agent. The structural principle transfers across tasks, providing an explanation for why discovered strategies take qualitatively different forms yet share similar parameter dynamics.

Multimodal reasoning in vision-language models (VLMs) typically relies on a two-stage process: supervised fine-tuning (SFT) and reinforcement learning (RL). In standard SFT, all tokens contribute equally to the loss, even though reasoning data are inherently token-imbalanced. Long <think> traces overshadow short but task-critical <answer> segments, leading to verbose reasoning and inaccurate answers. We propose SCALe (Scheduled Curriculum Adaptive Loss), which explicitly separates supervision over reasoning and answer segments using dynamic, length-independent weighting. Unlike vanilla SFT, which overweights the <think> segment, SCALe-SFT gradually shifts the focus from <think> to <answer> throughout training via a cosine scheduling policy, encouraging concise and well-grounded reasoning. We evaluate SCALe across diverse benchmarks and architectures. Results show that SCALe consistently improves accuracy over vanilla SFT and matches the performance of the full two-phase SFT + GRPO pipeline while requiring only about one-seventh of the training time, making it a lightweight yet effective alternative. When combined with GRPO, SCALe achieves the best overall performance, highlighting its value both as a standalone method and as a strong foundation for reinforcement refinement.

Consistency models are a nascent family of generative models that can sample high quality data in one step without the need for adversarial training. Current consistency models achieve optimal sample quality by distilling from pre-trained diffusion models and employing learned metrics such as LPIPS. However, distillation limits the quality of consistency models to that of the pre-trained diffusion model, and LPIPS causes undesirable bias in evaluation. To tackle these challenges, we present improved techniques for consistency training, where consistency models learn directly from data without distillation. We delve into the theory behind consistency training and identify a previously overlooked flaw, which we address by eliminating Exponential Moving Average from the teacher consistency model. To replace learned metrics like LPIPS, we adopt Pseudo-Huber losses from robust statistics. Additionally, we introduce a lognormal noise schedule for the consistency training objective, and propose to double total discretization steps every set number of training iterations. Combined with better hyperparameter tuning, these modifications enable consistency models to achieve FID scores of 2.51 and 3.25 on CIFAR-10 and ImageNet 64times 64 respectively in a single sampling step. These scores mark a 3.5times and 4times improvement compared to prior consistency training approaches. Through two-step sampling, we further reduce FID scores to 2.24 and 2.77 on these two datasets, surpassing those obtained via distillation in both one-step and two-step settings, while narrowing the gap between consistency models and other state-of-the-art generative models.

Large language models have led to state-of-the-art accuracies across a range of tasks. However, training these models efficiently is challenging for two reasons: a) GPU memory capacity is limited, making it impossible to fit large models on even a multi-GPU server, and b) the number of compute operations required to train these models can result in unrealistically long training times. Consequently, new methods of model parallelism such as tensor and pipeline parallelism have been proposed. Unfortunately, naive usage of these methods leads to fundamental scaling issues at thousands of GPUs, e.g., due to expensive cross-node communication or devices spending significant time waiting on other devices to make progress. In this paper, we show how different types of parallelism methods (tensor, pipeline, and data parallelism) can be composed to scale to thousands of GPUs and models with trillions of parameters. We survey techniques for pipeline parallelism and propose a novel interleaved pipeline parallelism schedule that can improve throughput by 10+% with memory footprint comparable to existing approaches. We quantitatively study the trade-offs between tensor, pipeline, and data parallelism, and provide intuition as to how to configure distributed training of a large model. Our approach allows us to perform training iterations on a model with 1 trillion parameters at 502 petaFLOP/s on 3072 GPUs with achieved per-GPU throughput of 52% of theoretical peak. Our code is open sourced at https://github.com/nvidia/megatron-lm.

Vision-language models (VLMs) enable embodied agents to reason and act from visual observations and language instructions. Reinforcement learning (RL) post-training enhances these capabilities using task feedback, but current on-policy RL runtimes execute rollout, reference scoring, and actor training in strict serial phases. While effective for text-only RL, this phase-granular execution is wasteful for VLMs, where processing dense video inputs and prompt prefixes occupies a large fraction of each phase. Because prefix processing is independent of the generated response, it can be run alongside rollout decoding, which leaves GPU compute capacity underutilized, without breaking synchronous on-policy semantics. We present Rollplex, a runtime that decomposes the reference and training phase and moves the prefix computation into the rollout decode window. Realizing this schedule requires more than concurrent kernel launches: naive colocation of Qwen2.5-VL-32\,B requires roughly 165\,GiB per GPU, while rollout and training prefer different tensor-parallel (TP) degrees and weight layouts. Rollplex addresses these constraints with two mechanisms. Phase-aware memory management controls HBM residency according to producer--consumer lifetimes. Parallelism-aware weight sharing uses the same physical storage for layout-compatible tensors across distinct TP degrees and reconstructs only incompatible tensors, avoiding a complete second actor copy. On 32 H800 GPUs, Rollplex achieves 1.23times--1.30times speedup over serial colocation and 1.57times--2.24times over disaggregation under the same GPU budget, while preserving the synchronous RL update.

Vector Quantization (VQ) is fundamental to discrete visual tokenizers that power modern autoregressive and masked image generation models. While recent shared-projection codebook methods have substantially advanced codebook utilization, training stability remains a critical and underexplored challenge. We argue that the root cause lies in the entanglement of the Encoder--Decoder and Codebook training: because neither module can reliably fulfill its own responsibility in isolation, the system can only function when the two subsystems happen to cooperate---a fragile condition that breaks down precisely when training is most stressed. We propose StableVQ, which revisits the proper learning objective of each module and resolves the problems that arise when each is trained to fulfill its own role independently. Concretely, (1) Dynamic STE corrects the instability in the Encoder's learning objective, enabling it to robustly optimize the reconstruction space under discrete regularization even when codebook utilization is low. (2) Region VQ Loss reconceives the Codebook's learning objective so that it can independently guarantee full tracking of the encoder output distribution, without relying on encoder oscillations to drive activation. (3) Decoupled Schedule recognizes that the distinct responsibilities of the Encoder--Decoder and the Codebook demand distinct optimization dynamics, and assigns each an independent learning rate schedule to ensure robust system-level behavior. Built on top of shared-projection codebooks, StableVQ is lightweight and introduces no learnable parameters. Experiments on ImageNet demonstrate consistent improvements in training stability, codebook utilization, and reconstruction quality across diverse codebook sizes and initialization settings.

Real-world post-training of generalist robot policies faces two challenges: partial observability makes action selection ambiguous, while offline post-training methods delay feedback from deployment experience. We present Value as Memory (VaM), a framework that addresses these challenges through value caching and online real-world reinforcement learning (RL). Value caching conditions actions on recent value predictions as task-progress memory, while online updates enable timely policy improvement by combining offline demonstrations, off-policy interventions, and on-policy rollouts for sample-efficient adaptation. As a result, VaM transitions from offline RL warmup to online autonomous learning with sparse rewards. Across long-horizon tasks involving deformable objects and contact-rich manipulation, VaM yields a mean absolute success-rate gain of 29.4% with value caching, while achieving a 32.8% gain with online autonomous learning over matched offline training. The evaluated online schedule performs 8times as many policy iterations under the same gradient-step budget, with more than 2times lower recorded time per gradient step with concurrent data collection and training.

Large language models (LLMs) are remarked by their substantial computational requirements. To mitigate the cost, researchers develop specialized CUDA kernels, which often fuse several tensor operations to maximize the utilization of GPUs as much as possible. However, those specialized kernels may still leave performance on the table as CUDA assembly experts show that manual optimization of GPU SASS schedules can lead to better performance, and trial-and-error is largely employed to manually find the best GPU SASS schedules. In this work, we employ an automatic approach to optimize GPU SASS schedules, which thus can be integrated into existing compiler frameworks. The key to automatic optimization is training an RL agent to mimic how human experts perform manual scheduling. To this end, we formulate an assembly game, where RL agents can play to find the best GPU SASS schedules. The assembly game starts from a -O3 optimized SASS schedule, and the RL agents can iteratively apply actions to mutate the current schedules. Positive rewards are generated if the mutated schedules get higher throughput by executing on GPUs. Experiments show that CuAsmRL can further improve the performance of existing specialized CUDA kernels transparently by up to 26%, and on average 9%. Moreover, it is used as a tool to reveal potential optimization moves learned automatically.

Fine-tuning Large Language Models (LLMs) on consumer-grade GPUs is highly cost-effective, yet constrained by limited GPU memory and slow PCIe interconnects. Pipeline parallelism combined with CPU offloading mitigates these hardware bottlenecks by reducing communication overhead. However, existing PP schedules suffer from an inherent limitation termed the weight binding issue. Binding uneven model stages (e.g., the LM head is large) to GPUs limits the pipeline's throughput to that of the GPU with the heaviest load, leading to severe pipeline bubbles. In this paper, we propose RoundPipe, a novel pipeline schedule that breaks the weight binding constraint on consumer GPU servers. RoundPipe treats GPUs as a pool of stateless execution workers and dynamically dispatches computation stages across devices in a round-robin manner, achieving a near-zero-bubble pipeline. To ensure training correctness and system efficiency, RoundPipe integrates a priority-aware transfer scheduling engine, a fine-grained distributed event-based synchronization protocol, and an automated layer partitioning algorithm. Evaluations on an 8times RTX 4090 server demonstrate that RoundPipe achieves 1.48--2.16times speedups over state-of-the-art baselines when fine-tuning 1.7B to 32B models. Remarkably, RoundPipe enables LoRA fine-tuning of the Qwen3-235B model with 31K sequence length on a single server. RoundPipe is publicly available as an open-source Python library with comprehensive documentation.

Training competitive deep video models is an order of magnitude slower than training their counterpart image models. Slow training causes long research cycles, which hinders progress in video understanding research. Following standard practice for training image models, video model training assumes a fixed mini-batch shape: a specific number of clips, frames, and spatial size. However, what is the optimal shape? High resolution models perform well, but train slowly. Low resolution models train faster, but they are inaccurate. Inspired by multigrid methods in numerical optimization, we propose to use variable mini-batch shapes with different spatial-temporal resolutions that are varied according to a schedule. The different shapes arise from resampling the training data on multiple sampling grids. Training is accelerated by scaling up the mini-batch size and learning rate when shrinking the other dimensions. We empirically demonstrate a general and robust grid schedule that yields a significant out-of-the-box training speedup without a loss in accuracy for different models (I3D, non-local, SlowFast), datasets (Kinetics, Something-Something, Charades), and training settings (with and without pre-training, 128 GPUs or 1 GPU). As an illustrative example, the proposed multigrid method trains a ResNet-50 SlowFast network 4.5x faster (wall-clock time, same hardware) while also improving accuracy (+0.8% absolute) on Kinetics-400 compared to the baseline training method. Code is available online.

Neural networks dominate the modern machine learning landscape, but their training and success still suffer from sensitivity to empirical choices of hyperparameters such as model architecture, loss function, and optimisation algorithm. In this work we present Population Based Training (PBT), a simple asynchronous optimisation algorithm which effectively utilises a fixed computational budget to jointly optimise a population of models and their hyperparameters to maximise performance. Importantly, PBT discovers a schedule of hyperparameter settings rather than following the generally sub-optimal strategy of trying to find a single fixed set to use for the whole course of training. With just a small modification to a typical distributed hyperparameter training framework, our method allows robust and reliable training of models. We demonstrate the effectiveness of PBT on deep reinforcement learning problems, showing faster wall-clock convergence and higher final performance of agents by optimising over a suite of hyperparameters. In addition, we show the same method can be applied to supervised learning for machine translation, where PBT is used to maximise the BLEU score directly, and also to training of Generative Adversarial Networks to maximise the Inception score of generated images. In all cases PBT results in the automatic discovery of hyperparameter schedules and model selection which results in stable training and better final performance.

With the increasing scale of models, the need for efficient distributed training has become increasingly urgent. Recently, many synchronous pipeline parallelism approaches have been proposed to improve training throughput. However, these approaches still suffer from two major issues, i.e., pipeline bubbles caused by periodic flushing and extra communication due to the increasing number of pipeline stages. To this end, we propose BitPipe, a bidirectional interleaved pipeline parallelism for accelerating large models training. Specifically, a hybrid scheme of fusing interleaved pipelines with bidirectional pipelines is proposed to reduce the computational time of each single micro-batch and multiply the number of devices executing simultaneously. A V-shaped schedule with eager gradient synchronization is introduced to reduce and overlap the communication between devices. Experiments conducted on up to 32 GPUs show that BitPipe improves the training throughput of GPT-style and BERT-style models by 1.05x-1.28x compared to the state-of-the-art synchronous approaches. The code of our implementation is available at https://github.com/wuhouming/BitPipe.

Training large neural networks with data-parallel stochastic gradient descent allocates N GPU replicas to compute effectively identical updates -- a practice that leaves the rich space of learning rate configurations entirely unexplored during training. We propose Hyperparameter-Divergent Ensemble Training (HDET), a method that repurposes these replicas for simultaneous learning rate exploration at negligible communication overhead. HDET operates in alternating phases: a fan-out stage in which replicas train independently under a structured, symmetric spread of learning rates, and a converge stage in which parameters are averaged across all replicas via AllReduce every T steps. Building on this ensemble substrate, we further propose an automatic learning rate (auto-LR) controller that treats the relative training loss across replicas as a performance signal, updating the shared base schedule toward higher-performing configurations via a momentum-based gradient-free meta-update. The combined method produces a self-adapting learning rate schedule that improves both optimization quality and generalization without additional hyperparameter sweeps or training budget. Crucially, the framework generalizes beyond learning rate: any scalar hyperparameter that does not alter model architecture -- such as dropout rate, attention scale temperature, or weight-decay coefficient -- can be explored across replicas using the same fan-out/converge protocol, with inter-replica loss differences serving as zero-order hypergradients that guide the search direction. HDET is implemented as a drop-in replacement for PyTorch's OneCycleLR scheduler, requiring no changes to model architecture, optimizer, or data pipeline.

A basic unanswered question in neural network training is: what is the best learning rate schedule shape for a given workload? The choice of learning rate schedule is a key factor in the success or failure of the training process, but beyond having some kind of warmup and decay, there is no consensus on what makes a good schedule shape. To answer this question, we designed a search procedure to find the best shapes within a parameterized schedule family. Our approach factors out the schedule shape from the base learning rate, which otherwise would dominate cross-schedule comparisons. We applied our search procedure to a variety of schedule families on three workloads: linear regression, image classification on CIFAR-10, and small-scale language modeling on Wikitext103. We showed that our search procedure indeed generally found near-optimal schedules. We found that warmup and decay are robust features of good schedules, and that commonly used schedule families are not optimal on these workloads. Finally, we explored how the outputs of our shape search depend on other optimization hyperparameters, and found that weight decay can have a strong effect on the optimal schedule shape. To the best of our knowledge, our results represent the most comprehensive results on near-optimal schedule shapes for deep neural network training, to date.

We discover that common diffusion noise schedules do not enforce the last timestep to have zero signal-to-noise ratio (SNR), and some implementations of diffusion samplers do not start from the last timestep. Such designs are flawed and do not reflect the fact that the model is given pure Gaussian noise at inference, creating a discrepancy between training and inference. We show that the flawed design causes real problems in existing implementations. In Stable Diffusion, it severely limits the model to only generate images with medium brightness and prevents it from generating very bright and dark samples. We propose a few simple fixes: (1) rescale the noise schedule to enforce zero terminal SNR; (2) train the model with v prediction; (3) change the sampler to always start from the last timestep; (4) rescale classifier-free guidance to prevent over-exposure. These simple changes ensure the diffusion process is congruent between training and inference and allow the model to generate samples more faithful to the original data distribution.

Masked Language Modeling (MLM) has been widely used as the denoising objective in pre-training language models (PrLMs). Existing PrLMs commonly adopt a Random-Token Masking strategy where a fixed masking ratio is applied and different contents are masked by an equal probability throughout the entire training. However, the model may receive complicated impact from pre-training status, which changes accordingly as training time goes on. In this paper, we show that such time-invariant MLM settings on masking ratio and masked content are unlikely to deliver an optimal outcome, which motivates us to explore the influence of time-variant MLM settings. We propose two scheduled masking approaches that adaptively tune the masking ratio and masked content in different training stages, which improves the pre-training efficiency and effectiveness verified on the downstream tasks. Our work is a pioneer study on time-variant masking strategy on ratio and content and gives a better understanding of how masking ratio and masked content influence the MLM pre-training.

We show that learning-rate schedules for large model training behave surprisingly similar to a performance bound from non-smooth convex optimization theory. We provide a bound for the constant schedule with linear cooldown; in particular, the practical benefit of cooldown is reflected in the bound due to the absence of logarithmic terms. Further, we show that this surprisingly close match between optimization theory and practice can be exploited for learning-rate tuning: we achieve noticeable improvements for training 124M and 210M Llama-type models by (i) extending the schedule for continued training with optimal learning-rate, and (ii) transferring the optimal learning-rate across schedules.

Consistency models are a new family of generative models capable of producing high-quality samples in either a single step or multiple steps. Recently, consistency models have demonstrated impressive performance, achieving results on par with diffusion models in the pixel space. However, the success of scaling consistency training to large-scale datasets, particularly for text-to-image and video generation tasks, is determined by performance in the latent space. In this work, we analyze the statistical differences between pixel and latent spaces, discovering that latent data often contains highly impulsive outliers, which significantly degrade the performance of iCT in the latent space. To address this, we replace Pseudo-Huber losses with Cauchy losses, effectively mitigating the impact of outliers. Additionally, we introduce a diffusion loss at early timesteps and employ optimal transport (OT) coupling to further enhance performance. Lastly, we introduce the adaptive scaling-c scheduler to manage the robust training process and adopt Non-scaling LayerNorm in the architecture to better capture the statistics of the features and reduce outlier impact. With these strategies, we successfully train latent consistency models capable of high-quality sampling with one or two steps, significantly narrowing the performance gap between latent consistency and diffusion models. The implementation is released here: https://github.com/quandao10/sLCT/